Instruction/ maintenance manual of the product PSR540 Multi Track Recorder Yamaha
Go to page of 8
Service & Support http://solutionsnetwork .y am aha.com PSR540 Mu lti Track Reco rding T utorial The PSR540 is equipped with a 16 Track real-tim e sequenc er. The s equencer data is stored direc tly to an IBM for matted 720KB ( 2DD) floppy disk, with a capacity of 65,000 notes, or a 1.
3) Press the [EXIT] button. Selecting an Auto A ccompanimen t Style: 1) Press the [STYLE] button. 2) Type in the number of the Auto Accom panim ent Style on the numeric k eypad. 3) Tak e note of the Trac ks that c ontain Accom panim ent data. This is necess ary inform ation when selecting the Ac com panim ent Trac ks in the Rec ording Procedure.
8) Press the [+] button to set the Track to record. NOTE: Repeat steps 6 an d 8 to enable other Accompaniment Par ts to be recorded. 9) Press the [NEXT ] button. T he screen will display 'Rehearsal'. 10) Press the [NEXT ] button. 11) Select one of the following options: a) Recording with an Intro: 1] Press the [INTRO] button.
3) Select one of the following options: a) Recording a new Song. 1] Press the [NEXT ] button. 2] Proceed to s tep 4. b) Selecting a previous ly recor ded Song. 1] Press the [+] button until the screen displays the Song title. 2] Press the [NEXT ] button.
press the [RECORD] button. TIP: Save the Song each time it r eaches a new satis factory lev el or when multiple takes of the s ame part are being recor ded. b) Cancel the save operation. 1] Press the [-] button. 2] Return to step 10 to re-record the T rack .
2) Press the [NEXT ] button. T he screen will display '001 New Song'. 3) Press the [NEXT ] button. 4) Press the [+] button. The screen will display 'RecMode=MultiRec'. 5) Press the [NEXT ] button three tim es. T he scr een will display 'Rec Part T01=R1'.
16) Press the [NEXT ] button. 17) Select one of the following options: a) Recording with an Intro: 1] Press the [INTRO] button. 2] Play the key board. 3] Proceed to s tep 18. b) Recording without an Intro: 1] Press either the [ M AI N A] or [M A IN B] button.
4) Press the [NEXT ] button. T he screen will display 'RecMode Tx x=Ply'. 5) Press the [+] button. The screen will display 'RecMode T xx=Rec'. 6) Press the [NEXT ] button. T he screen will display 'Rehearsal'. 7) If nec essary, select a Voice for R1.
An important point after buying a device Yamaha PSR540 Multi Track Recorder (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Yamaha PSR540 Multi Track Recorder yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Yamaha PSR540 Multi Track Recorder - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Yamaha PSR540 Multi Track Recorder you will learn all the available features of the product, as well as information on its operation. The information that you get Yamaha PSR540 Multi Track Recorder will certainly help you make a decision on the purchase.
If you already are a holder of Yamaha PSR540 Multi Track Recorder, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Yamaha PSR540 Multi Track Recorder.
However, one of the most important roles played by the user manual is to help in solving problems with Yamaha PSR540 Multi Track Recorder. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Yamaha PSR540 Multi Track Recorder along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center