Instruction/ maintenance manual of the product GX-700 Yamaha
Go to page of 52
G B 3 – DISC CD CHANGER STANDBY TIMER DOWN UP VOLUME STANDBY/ON AUTO REVERSE CASSETTE DECK DOLBY B NR PTY SELECT PRESET / TUNING / BAND A / B / C / D / E DISC 1 DISC 2 DISC 3 DISC CHANGE OPEN / CLOSE PROGRAM B.
2 2 2 Unpacking ● After unpacking, chec k that the f ollowing parts are contained. Déballage ● Après le déballage, vérifier que les pièces suiv antes sont incluses. A uspacken ● Nach dem A uspac k en über prüf en, ob die f olgenden T eile vorhanden sind.
3 3 3 1 cm 1 cm 20 cm 20 cm 20 cm 20 cm 20 cm 20 cm 20 cm 20 cm ● Setting this system ● Installation de ce système ● A ufstellen des Systems ● Iordningsställande a v denna anläggning ● In.
4 4 4 DISC 1 DISC 2 DISC 3 3 – DISC CD CHANGER STANDBY TIMER DOWN UP VOLUME STANDBY/ON AUTO REVERSE CASSETTE DECK DOLBY B NR DIRECTION PROGRAM B.BOOST MUSIC INPUT INPUT PHONES MIN PTY SELECT PRESET .
5 5 5 1 Displa y panel P anneau d’affichage Anzeigefeld Display Quadrante delle indicazioni Visualizador Displaypaneel 2 Remote contr ol sensor Capteur de télécommande Fernbedienungssensor Fjärrkontr ollsensor Sensore del telecomando Sensor del control remoto Afstandbedieningsensor 3 TIMER 4 ST ANDBY [p.
6 6 6 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 0 TIME PROG R. TIME C EDIT D PRESET + I0 E MODE REPEAT RANDOM TUNER DISC SKIP REC/PAUSE DIRECTION CENTER / REAR / DELAY TEST PROGRAM BASS BOOST MUSIC POWER SLEEP INPUT VOLUME AB T APE TUNER CD LEVEL /I 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 0 TIME PROG R.
7 7 7 T ape deck Platine cassette Kassettendeck Kassettdäck registratore Platina T apedeck CD player Lecteur de disque compact CD-Spieler CD-spelare Lettore CD T ocadiscos de discos compactos Compact.
Contents English Thank you for purchasing this YAMAHA product. We hope it will give you many years of trouble-free enjoyment. For the best performance, read this manual carefully. It will guide you in operating your YAMAHA product. Pag e Precautions .
E-1 English ■ To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. ■ Choose the installation location of this system carefully. Avoid placing it in direct sunlight or close to a source of heat.
E-2 Precautions: Read this before operating your system IMPORT ANT Please record the serial number of this system in the space below . Model: Serial No.: The serial number is located on the rear of the main unit. Retain this Owner’ s Manual in a safe place f or future reference.
E-3 English Features General ● 5-Speaker Multichannel A udio System (T w o front, One Center and T wo Rear Speakers) ● High P o wer Output Front L, R: 80W + 80W (6 Ω ) RMS, 0.9% THD , 1 kHz Center: 80W (6 Ω ) RMS Output P ower , 0.9% THD , 1 kHz Rear: 25W (6 Ω ) RMS Output P ower , 0.
E-4 Preparations and connections 1. T urn the remote control over and remo ve the battery compar tment cov er by pulling it up while pressing the edge of the cov er in the direction of the mark. 2. Insert the batteries (AA, R6, UM-3 type) according to the polarity markings on the inside of the battery compartment.
E-5 English Setting up the speakers m 4 channel 5 speaker configuration This system emplo ys a 5 speaker configur ation: 2 front speak ers , 2 rear paralleled speak ers and a center speak er . The front speak ers are used f or outputting main source sound.
E-6 Preparations and connections m Mounting the rear speaker s Mount the rear speakers on a shelf , rack or on the floor , or hang them on the wall. T o mount the rear speakers on the wall b y using commer cially av ailable speaker stands The provided mounting br ack et has 1 pair of screw holes (at an interval of 60 mm).
E-7 English Preparations and connections Never plug the A C supply lead of this system into the A C outlet until all connections are completed. Connections Caution Do not let the bare speaker wires touch each other as this could dama ge the amplifier and/or speakers.
E-8 Preparations and connections m Connecting e xternal components This system can be connected with e xternal audio and video components. Mak e connections between this system and the components using RCA pin plug connector cables correctly , that is to sa y L (left) to L and R (right) to R .
English E-9 DISC 1 DISC 2 DISC 3 3 – DISC CD CHANGER STANDBY TIMER DOWN UP VOLUME STANDBY/ON AUTO REVERSE CASSETTE DECK DOLBY B NR DIRECTION PROGRAM B.
E-10 Preparations and connections 1 T ur n on the pow er . 2 T ur n down the v olume to minimum. 3 Press PROGRAM once or more until “ PRO LOGIC” lights up on the sound field program indicator . 4 Press TEST . * “TEST” flashes on and off on the display .
E-11 English Compact disc player operation 100 350 1K 3.5K 10K MUSIC PROG S F REP VOLUME OVER 15 123 4 789 1 0 13 14 15 5 11 6 12 TOTAL REM TRACK RANDOM CD PROGRAM 3 12 8 0 5 47 9 6 1 TRACK (trac k number) 2 Time display 3 Disc indicator The disc of the number located on the top of this indicator is now being selected.
E-12 DISC 1 DISC 2 DISC 3 3 – DISC CD CHANGER STANDBY TIMER DOWN UP VOLUME STANDBY/ON AUTO REVERSE CASSETTE DECK DOLBY B NR DIRECTION PROGRAM B.BOOST MUSIC INPUT INPUT PHONES MIN PTY SELECT PRESET /.
E-13 English During play , you can open the disc tra y by pressing DISC CHANGE without interrupting play . Howe ver , in this case, pressing DISC SKIP or DISC ( 1 , 2 or 3 ) is invalid.
E-14 Compact disc pla yer operation Program play Y ou can progr am up to 20 trac ks in any desired order . 1 When the CD player is stopped, press PROG to prepare for programming. * “PR OG” ( 9 ) and “P-01” ( 2 ) will light up on the display , and all track numbers on the selected disc ( 7 ) will begin flashing.
E-15 English Compact disc pla yer operation (off) S REP F REP DISC 1 DISC 2 DISC 3 DOWN UP VOLUME STANDBY/ON DIRECTION PROGRAM B.BOOST MUSIC INPUT INPUT MIN PTY SELECT PRESET / TUNING / BAND A / B / C.
E-16 Compact disc pla yer operation Switching the time display Every time TIME is pressed, the display will change as described below . [Example] When the second track is being played. (Refer to the illustration on the left.) 1 The elapsed play time for the current track will be displayed.
E-17 English T uning operation 100 350 1K 3.5K 10K PROGRAM MUSIC KARAOKE VOLUME PRESET STEREO AUTO TUNED PTY HOLD MEMORY TUNER 2 1 8 3 45 7 6 5 TUNED 6 MEMOR Y 7 PTY HOLD 8 TUNER (input sour ce indica.
E-18 A utomatic tuning 1 T ur n on the pow er . 2 Press INPUT or until “TUNER” ( 2 , 8 ) appears on the displa y , or simply press TUNER on the remote control. 3 Select the reception band (FM or AM) by pressing PRESET/TUNING/B AND confirming it on the display ( 2 ).
E-19 English PROGRAM BASS BOOST MUSIC CENTER/ REAR/DELAY TEST LEVEL VOLUME POWER SLEEP /I REC/PAUSE DIRECTION T APE 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 0 TIME PROG R. TIME C EDIT D PRESET + I0 E MODE REPEAT RANDOM TUNER DISC SKIP AB TUNER CD INPUT DISC 1 DISC 2 DISC 3 DOWN UP VOLUME STANDBY/ON DIRECTION PROGRAM B.
E-20 3 DISC 1 DISC 2 DISC 3 DOWN UP VOLUME STANDBY/ON DIRECTION PROGRAM B.BOOST MUSIC INPUT INPUT MIN PTY SELECT PRESET / TUNING / BAND A / B / C / D / E DISC CHANGE OPEN / CLOSE AUTO/MANUAL TIMER MEM.
E-21 English m Changing the RDS modes When an RDS station is received, by pressing FREQ PS/PTY/ RT/CT once or more, you can change the display mode among the RDS modes employed by the received station in the order shown on the next page. (The RDS mode not employed by the station cannot be selected.
E-22 T uning operation 1 Frequency display mode The frequency of the station being received is displayed. 2 PS (Program Service name) mode The name of the station being received is displayed using characters selected from among 64 Roman Alphabets including umlaut sign.
E-23 English T uning operation m Calling a pr ogram of y our desired program type fr om among preset RDS stations (PTY SEEK) By designating a progr am type, the tuner automatically searches all preset FM stations f or an RDS station which broadcasts a progr am of that program type.
E-24 DISC 1 DISC 2 DISC 3 DOWN UP VOLUME STANDBY/ON DIRECTION PROGRAM B.BOOST MUSIC INPUT INPUT MIN PTY SELECT PRESET / TUNING / BAND A / B / C / D / E DISC CHANGE OPEN / CLOSE TREBLE AUTO/MANUAL TIME.
E-25 English Playing back a tape ● Do not use C-120 tapes or poor-quality tapes, since they can cause malfunctions. ● Before loading a tape on the tr a y , tighten the tape slack with a pen or pencil. ● T apes hav e remov able tabs which pre vent accidental recording or erasing from taking place.
E-26 PROGRAM BASS BOOST MUSIC CENTER/ REAR/DELAY TEST LEVEL VOLUME POWER SLEEP /I REC/PAUSE DIRECTION T APE 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 0 TIME PROG R.
E-27 English PROGRAM BASS BOOST MUSIC CENTER/ REAR/DELAY TEST LEVEL VOLUME POWER SLEEP /I REC/PAUSE DIRECTION T APE 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 0 TIME PROG R. TIME C EDIT D PRESET + I0 E MODE REPEAT RANDOM TUNER DISC SKIP AB TUNER CD INPUT DISC 1 DISC 2 DISC 3 DOWN UP VOLUME STANDBY/ON DIRECTION PROGRAM B.
E-28 PROGRAM BASS BOOST MUSIC CENTER/ REAR/DELAY TEST LEVEL VOLUME POWER SLEEP /I REC/PAUSE DIRECTION T APE 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 0 TIME PROG R. TIME C EDIT D PRESET + I0 E MODE REPEAT RANDOM TUNER DISC SKIP AB TUNER CD INPUT DISC 1 DISC 2 DISC 3 DOWN UP VOLUME STANDBY/ON DIRECTION PROGRAM B.
E-29 English PROGRAM BASS BOOST MUSIC CENTER/ REAR/DELAY TEST LEVEL VOLUME POWER SLEEP /I REC/PAUSE DIRECTION T APE 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 0 TIME PROG R. TIME C EDIT D PRESET + I0 E MODE REPEAT RANDOM TUNER DISC SKIP AB TUNER CD INPUT DISC 1 DISC 2 DISC 3 DOWN UP VOLUME STANDBY/ON DIRECTION PROGRAM B.
E-30 PROGRAM BASS BOOST MUSIC CENTER/ REAR/DELAY TEST LEVEL VOLUME POWER SLEEP /I REC/PAUSE DIRECTION T APE 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 0 TIME PROG R. TIME C EDIT D PRESET + I0 E MODE REPEAT RANDOM TUNER DISC SKIP AB TUNER CD INPUT DISC 1 DISC 2 DISC 3 DOWN UP VOLUME STANDBY/ON DIRECTION PROGRAM B.
E-31 English PROGRAM BASS BOOST MUSIC CENTER/ REAR/DELAY TEST LEVEL VOLUME POWER SLEEP /I REC/PAUSE DIRECTION T APE 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 0 TIME PROG R. TIME C EDIT D PRESET + I0 E MODE REPEAT RANDOM TUNER DISC SKIP AB TUNER CD INPUT DISC 1 DISC 2 DISC 3 DOWN UP VOLUME STANDBY/ON DIRECTION PROGRAM B.
E-32 M PROG VOLUME A OVER 15 123 4 789 1 0 13 14 15 5 11 6 12 REM TRACK CD NR K K AM C HALL YMERSION EDIT PROG S F REP VOLUME A B OVER 15 123 4 789 1 0 13 14 15 5 11 6 12 TRACK VCD PBC TIMER SLEEP NOR.
English E-33 PROGRAM BASS BOOST MUSIC CENTER/ REAR/DELAY TEST LEVEL VOLUME POWER SLEEP /I REC/PAUSE DIRECTION T APE 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 0 TIME PROG R. TIME C EDIT D PRESET + I0 E MODE REPEAT RANDOM TUNER DISC SKIP AB TUNER CD INPUT DISC 1 DISC 2 DISC 3 DOWN UP VOLUME STANDBY/ON DIRECTION PROGRAM B.
E-34 V arious sound control 100 350 1K 3.5K 10K MUSIC ROCK POPS JAZZ VOLUME BASS BOOST CD PROGRAM PRO LOGIC HALL 3 STEREO YMERSION 3 12 5 4 1 Spectrum analyzer The spectrum of the input source which is divided in five bands will be indicated in real time .
E-35 English V arious sound control m Listening with headphones ● Be sure that your headphones ha v e a 3.5 mm (1/8”) diameter plug and between 16 ohms and 50 ohms impedance. Recommended impedance is 32 ohms. ● When you listen with headphones , connect the headphones to the PHONES jack.
E-36 Sound field pr ocessor The Sound Field Processor b uilt into this system enables y ou to enjo y listening to a source with an ambience of actual concer t hall or three-dimensional acoustics. This system pro vides preset sound field progr ams shown belo w .
E-37 English V arious sound control m Listening to the m usic with a sound field effect 1 Play a source . 2 Press PR OGRAM once or more until the name of the desired program is illuminated on the sound field prog ram indicator ( 5 ). * Whene ver y ou press PR OGRAM , the program changes and is displa yed as f ollows.
E-38 V arious sound control If desired, you can adjust the sound output le vel of the center and/or rear speakers e ven if the output le vel is already set in “Speaker balance adjustment” on page 10. CENTER LEVEL Control range : +10 to –21 1 Press CENTER/REAR/DELA Y once or more until “CENTER” appears on the displa y .
E-39 English PROGRAM BASS BOOST MUSIC CENTER/ REAR/DELAY TEST LEVEL VOLUME POWER SLEEP /I REC/PAUSE DIRECTION T APE 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 0 TIME PROG R. TIME C EDIT D PRESET + I0 E MODE REPEAT RANDOM TUNER DISC SKIP AB TUNER CD INPUT DISC 1 DISC 2 DISC 3 DOWN UP VOLUME STANDBY/ON DIRECTION PROGRAM B.
E-40 This system will be set to the standby mode automatically when the selected sleep time passes. 1 Play the desired sound source. 2 Press SLEEP repeatedly until the desired sleep time appears on the displa y . The display will change as described below .
English E-41 Appendix Refer to the chart below when this system does not function properly . If the problem you are e xper iencing is not listed below or if the instruction below does not help , disconnect the power cord and contact y our author ized Y AMAHA dealer or ser vice center .
E-42 Appendix CD player Problem A disc cannot be play ed back normally , or there is a noise during play . Pla y will not begin ev en if disc is loaded. No sound. Sound stops suddenly (always at the same spot). T ape will not move during pla yback or recording.
E-43 English Appendix Specifications n Amplifier section Minimum RMS Output P ower per Channel FRONT 6 ohm, 1 kHz, 0.9% THD ..................................... 80W+80W CENTER 6 ohm, 1 kHz, 0.9% THD .............................................. 80W REAR 6 ohm, 1 kHz, 0.
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.
An important point after buying a device Yamaha GX-700 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Yamaha GX-700 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Yamaha GX-700 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Yamaha GX-700 you will learn all the available features of the product, as well as information on its operation. The information that you get Yamaha GX-700 will certainly help you make a decision on the purchase.
If you already are a holder of Yamaha GX-700, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Yamaha GX-700.
However, one of the most important roles played by the user manual is to help in solving problems with Yamaha GX-700. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Yamaha GX-700 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
