Instruction/ maintenance manual of the product AM-825 Acesonic
Go to page of 16
www .acesonic.com USER’S MANUAL NOTE: T o ensure this component will work safely and to its fullest potential, please read this user ’s manual carefully before operation and keep for future reference.
RISK OF ELECTRIC SHOCK DO NOT OPEN RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE P ARTS INSIDE. REFER SERVICING T O QUALIFIED SERVICE PERSONNEL. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
15. product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company . For products intended to operate from battery power , or other sources, refer to the operating instructions.
Please check to make sure all accessories are included. If anything is missing, please contact your dealer immediately . - 1 Remote Control - 1 RCA Audio/Video Cable (yellow/red/white) - 1 AC Power Ad.
Front Pannel Function and Operation 1.POWER ON/OFF button - 9.INPUT button - 10.MICROPHONE INPUT jacks(1A,1B,2A,2B,3A,3C) - 13.BALANCE control - T urns the AM-825 on or off. When the POWER is ON, indicator lights on the front panel illuminate. Sets the input source selection to manual mode.
16.MICROPHONE MEDIANT control - 17.MICROPHONE TREBLE control - 18.SELECTOR button - 19.ECHO VOL control - 20.ECHO LOW control - 21.ECHO HIGH control - 22.REPEA T control - 23.DELA Y control - 24.MUSIC LOUDNESS button - 25.MUSIC VOL control - 26.MUSIC BALANCE control - 27.
AC INPUT AC INPUT ~230/115V 50/60Hz ~230/115V 50/60Hz FUSE 250V/T10A FUSE 250V/T10A GND LINE MIC OUTPUT MIXING HIGH SUB MUSIC LOW PRE REC INPUT R L OUTPUT PC INPUT PC INPUT VIDEO SPEAKER SYSTEM SPEAKE.
Remote Control: 1 1.KEY CONTROL: 1.FLA T button (b) - 2.NA TURAL button ( ) - 3.SHARP button (#) - 2.BBE ON/OFF buttons - 1.USB button - 5.MUSIC VOL +/- buttons - 6.MIC VOL +/- buttons - 7.ECHO VOL +/- buttons - R button (right) - lowers music key by one half-tone.
AC INPUT AC INPUT ~230/115V 50/60Hz ~230/115V 50/60Hz FUSE 250V/T10A FUSE 250V/T10A GND LINE MIC OUTPUT MIXING HIGH SUB MUSIC LOW PRE REC INPUT R L OUTPUT PC INPUT PC INPUT VIDEO SPEAKER SYSTEM SPEAKE.
AC INPUT AC INPUT ~230/115V 50/60Hz ~230/115V 50/60Hz FUSE 250V/T10A FUSE 250V/T10A GND LINE MIC OUTPUT MIXING HIGH SUB MUSIC LOW PRE REC INPUT R L OUTPUT PC INPUT PC INPUT VIDEO SPEAKER SYSTEM SPEAKE.
11 General Operation Make sure all external components (players, speakers, microphones) are connected before you turn on the AM-825. See page 9,10 for connection information. Press on the front panel. There is no power button on the remote control. When the POWER is turned ON, indicator lights on the front panel illuminate.
General Operation Music Controls : Use l to adjust the overall volume of music. Stereo left-right panning can be adjusted with . Use and to adjust , middle and high frequency characteristics of the music.
T roubleshooting If you are having problems operating the AM-825, or suspect something is wrong with the unit, please check the troubleshoot list below to see if the issue is a result of incorrect operation rather than equipment malfunction. If you are still unable to resolve the problem, please contact our Acesonic tech.
Specifications Maximum Output 300W + 300W / 8 Ohm Max RMS (continuous) Output 200W + 200 W/ 4 Ohm RMS Microphone Input Sensitivity <25mV Music Input Sensitivity 250mV/ 47 Kohm/ 1Khz Microphone Freq.
Detach this portion and mail it to the factory The following information is appreciated, but not required: Dealer's name and address: What other products and/or product changes would you like to see Manufactured? Any other comments: MODEL SERIAL NO.
LIMITED DOMESTIC W ARRANTY ACESONIC W ARRANTS ALL PRODUCTS PURCHASED IN THE U .S . AGAINST DEFECTS IN MA TERIAL OR WORK - MANSHIP FOR A PERIOD OF FROM THE INITIAL DA TE OF RET AIL PURCHASE FROM A ACESONIC DEALER, OR, ( ) FROM THE DA TE OF MANUF ACTURE F PROOF OF PURCHASE DA TE IS NOT A V AILABLE.
An important point after buying a device Acesonic AM-825 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Acesonic AM-825 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Acesonic AM-825 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Acesonic AM-825 you will learn all the available features of the product, as well as information on its operation. The information that you get Acesonic AM-825 will certainly help you make a decision on the purchase.
If you already are a holder of Acesonic AM-825, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Acesonic AM-825.
However, one of the most important roles played by the user manual is to help in solving problems with Acesonic AM-825. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Acesonic AM-825 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
