Instruction/ maintenance manual of the product Switcher Xantech
Go to page of 6
- 1 - HDMI4X1 User Manual www.xantech.com.
- 2 - INTRODUCTION Congratulations on your purchase of the HDMI4X1 Switcher. The 4x1 HDMI Switcher allows access to four HDTV devices, using one HDTV display. The line offers solu tions for Home Theater, AV installation, data center, informat ion distribution, conference room presentation, school and corporate training environments.
- 3 - INSTRUCTIONS 1 Connect the supplied cables from the HDTV HDMI sources into the 4x1 HDMI Switcher inputs. 2 Connect the cables from your display (monitor or projector) into the HDM I out of the 4x1 HDMI Switcher. 3 Plug the 5VDC power supply in to the 4x1 HDMI Switcher.
- 4 -.
- 5 - RS232 INTERFACE Binary Table ASCII Input Binary 1 1 0011 0001 2 2 0011 0010 3 3 0011 0011 4 4 0011 0100 Terminal Settings Bits per second 19200 Data bits 8 Parity None Stop bits 1 Flow Control None SPECIFICATIONS Video Amplifier Bandwidth 1.65 GHz Input Video Signal 1.
- 6 - Technical Support Hours: 7AM-5PM Pacific Phone: 800.843.5465 pre ss 2 for Tech Support Fax: 800.492.6832 email: tech@xantech.com Mailing Address Xantech Corporation 13100 Telfair Avenue, 2/F Sylmar, CA 91342 HDMI4X1 User Manual © 2007 Xantech Corporation This document is copyright protected.
An important point after buying a device Xantech Switcher (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Xantech Switcher yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Xantech Switcher - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Xantech Switcher you will learn all the available features of the product, as well as information on its operation. The information that you get Xantech Switcher will certainly help you make a decision on the purchase.
If you already are a holder of Xantech Switcher, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Xantech Switcher.
However, one of the most important roles played by the user manual is to help in solving problems with Xantech Switcher. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Xantech Switcher along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
