Instruction/ maintenance manual of the product IR-DC4 Xantech
Go to page of 4
1 Modules & Connecting Blocks INST ALLA TION INSTRUCTIONS IR-DC4 IR/RS232 INTERFACE MODULE The IR-DC4 is an IR to RS232 Interface Module. Specifically, the IR-DC4 converts certain Xantech RC68 Remote Programmer IR control codes into RS232 commands that operate the Arrakis Digilink 4 Hard Disk Audio Jukebox.
2 IR-DC4 CAUTION: While the RC68 will operate as a separate remote control, it is highly recommended it not be given to the final user for the following reasons: • Since it includes adjustable code settings, the user may inadvertently alter the installer configurations.
3 Modules & Connecting Blocks IR-DC4 3. A high current power supply, the 782-00 (1A @ 12 VDC), provides the additional current needed for the keypads.
4 IR-DC4 5-10-00 DC4. For details of the many operational functions and configuration options for the Arrakis system, refer to the Arrakis DC4 users manual and DC4 Series Application Notes.
An important point after buying a device Xantech IR-DC4 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Xantech IR-DC4 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Xantech IR-DC4 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Xantech IR-DC4 you will learn all the available features of the product, as well as information on its operation. The information that you get Xantech IR-DC4 will certainly help you make a decision on the purchase.
If you already are a holder of Xantech IR-DC4, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Xantech IR-DC4.
However, one of the most important roles played by the user manual is to help in solving problems with Xantech IR-DC4. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Xantech IR-DC4 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
