Instruction/ maintenance manual of the product HDMI1X2 Xantech
Go to page of 9
HDMI1X2 USER MANUAL www .xantech.com.
CONTENTS 1 Introduction / Operation Notes 2 Features and Package Contents 3 Panel Layout and Descriptions 4 Panel Descriptions, Continued 5 Connecting The Xantech 1X2 Splitter For HDMI 1.
The Xantech 1X2 Splitter for HDMI 1.3 The Xantech 1X2 Splitter for HDMI 1.3 allows set-top boxes, DVD players, Blu- ray players and other HDTV devices with HDMI outputs to be connected to up to two HDTV displays (or more if multiple splitters are utilized in place of HDTV displays).
-2- FEA TURES Features Connects up to two HDMI / DVI displays from one HDMI source • Optionally add more displays by connecting splitters • Easily attains resolutions up to 1080p, 2k, and 1920 x 1200 • HDMI and HDCP compliant • HDMI 1.
-3- P ANEL LA YOUT AND DESCRIPTIONS Front Panel Back Panel 1 5 2 6 3 7 4 89 1 0 Power LED 1 This LED will activate once a valid power source is applied. Internal EDID LED 2 This LED will activate only when the pre-programmed internal EDID is being used.
-4- P ANEL DESCRIPTIONS, CONTINUED HDMI Input 7 This is the input for the HDMI source device. When a valid source is detected by the splitter , the Link LED will activate. HDMI Out 1 8 This is the fi rst HDMI output port. Connect a valid HDMI display to this port.
-5- CONNECTING THE 1X2 SPLITTER FOR HDMI 1.3 How to Connect the 1X2 Splitter For HDMI 1.3 Connect the supplied cable from the HDMI source into the 1X2 Splitter for HDMI 1.3 1. input. Connect the cables from your displays (monitor or projector) into the HDMI outs 2.
-6- SPECIFICA TIONS Video Ampli fi er Bandwidth: 225 MHz Input Video Signal: 12 V olts p-p Input DDC Signal: 5 V olts p-p (TTL) Single Link Range: 1080p/1920 x 1200, 12 bit color depth HDMI Connector: T ype A 19 Pin Female Power Supply: 5V DC Power Consumption: 10 W atts (max) Dimensions: 10.
www .xantech.com.
An important point after buying a device Xantech HDMI1X2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Xantech HDMI1X2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Xantech HDMI1X2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Xantech HDMI1X2 you will learn all the available features of the product, as well as information on its operation. The information that you get Xantech HDMI1X2 will certainly help you make a decision on the purchase.
If you already are a holder of Xantech HDMI1X2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Xantech HDMI1X2.
However, one of the most important roles played by the user manual is to help in solving problems with Xantech HDMI1X2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Xantech HDMI1X2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
