Instruction/ maintenance manual of the product HD16D Xantech
Go to page of 4
08905120A - 1 - INSTALLATION INSTRUCTIONS HD16D Component Video and Audio Distribution Amplifier INTRODUCTION The HD16D is a multi-A/V compatib le distribution amplifier. Built to the highest standards, the HD16D is capable of distributing high-definit ion images to multiple displays at over 150 feet.
08905120A - 2 - INSTALLATION 1. Use high quality low-loss cables (RG-6 reco mmended) for all A/V connections. For runs in excess of 10 feet, use low-loss RG-6 coax. Runs in excess of 150 feet are not recommended. 2. The HD16D power should be switched on and off at the same time as the source equipment.
08905120A - 3 - Expansion of Remote Location To extend up to 1000 feet, use HD44CC5 or HDTXSG01 and HDRXSG01 as such..
08905120A - 4 - SPECIFICATIONS Video Gain: 2 Volt non-terminated, 1 Volt terminated, 75 Ohms ±1% Input Impedance: 75 Ohms Output Impedance: 75 Ohms Video Insertion Loss: 50 Hz to 10 MHz < .
An important point after buying a device Xantech HD16D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Xantech HD16D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Xantech HD16D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Xantech HD16D you will learn all the available features of the product, as well as information on its operation. The information that you get Xantech HD16D will certainly help you make a decision on the purchase.
If you already are a holder of Xantech HD16D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Xantech HD16D.
However, one of the most important roles played by the user manual is to help in solving problems with Xantech HD16D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Xantech HD16D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
