Instruction/ maintenance manual of the product 797 Xantech
Go to page of 3
1 Modules & Connecting Blocks INST ALLA TION INSTRUCTIONS 794 & 797 INTERFACE MODULES The Model 794 or 797 allows any of the Xantech 3-wire IR receivers, keypads and control systems to connect directly to the serial remote control input jack found on many audio/video components.
2 794-00/797-00 The following diagram, Fig. 3 , illustrates a typical application of the 794 along with a 780-10 IR Receiver to control an A/V receiver. • The INTERFACE CABLE must always be plugged into the OUTPUT jack of the the 794, never the SENDER/EMITTER jack.
3 Modules & Connecting Blocks TABLE 2 - 797 Series Interfaces TABLE 3 - Direct Connected Products NOTES: 1. No connection to GND1. 2. Pioneer CD players, tape decks, projection TV's, etc., including newer receivers, require a wire between the GND2 screw on the 794 and a ground screw on the Pioneer device.
An important point after buying a device Xantech 797 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Xantech 797 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Xantech 797 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Xantech 797 you will learn all the available features of the product, as well as information on its operation. The information that you get Xantech 797 will certainly help you make a decision on the purchase.
If you already are a holder of Xantech 797, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Xantech 797.
However, one of the most important roles played by the user manual is to help in solving problems with Xantech 797. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Xantech 797 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
