Instruction/ maintenance manual of the product PS-150 Wybron
Go to page of 16
User Manual Power Supplies.
2 PS-150 – Model #20150 (150 watts) PS-300 – Model #20300 (300 watts) PS-600 – Model #20600 (600 watts) Software version 1.0 Manual revision: March 15, 2006 CONTENTS Decl arat ion of C onfo rmit y ................................................
3.
4 Safety Information SAVE THESE INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS This manual gives step-by-step instructions for the preparation, setup, and operation of the PS-150, PS-300 and PS-600 Power Supply. There is a potential risk of fire, electric shock or injury to persons if the product is not used as instructed.
5 Notes de Sécurité EPARGNER CES INSTRUCTIONS LIRE ET SUIVRE TOUTES INSTRUCTIONS Ce manuel donne des instructions pour la preparation, l’organisation, et l’opération du le PS provision d'électricité. Il y a un risqué de feu, décharge électrique, ou la blessure aux gens si le produit n’est pas utilize comme instruit.
6 Aviso Sobre Seguridad SALVE ESTAS INSTRUCCIONES LEA Y SIGA TODAS INSTRUCCIONES Este manual da el paso por paso las instrucciones para la preparación, para arreglo, y para la operación de la PS fuente del poder. Hay un riesgo potencial del fuego, el calambre o la herida a personas si el producto no se utiliza como instruido.
7 Sicherheitshinweise BEHALTEN SIE DIESEN ANWEISUNGEN LESEN SIE UND GEHORCHEN SIE ALLEN ANWEISUNGEN Dieses Handbuch gibt Schritt für Schritt Anweisungen zur Vorbereitung, Aufstellung, und Funktion dem PS Quelle der Kraft.
8 Introduction The PS-150, PS-300 and PS-600 are Wybron’s new RDM compatible Power Supplies. The power supplies work with their compatible devices, allowing you to control the fan speed (where applicable) via one or multiple DMX channels on the lighting console.
9 Example of a system layout: Equipment Compatibility The following is a chart of compatibility and capacity of the various models of PS Power Supplies and the companion devices. This is current as of the print date of this manual. As more products are added to the compatible line, an updated list will be available on the Wybron website at www.
10 Installing / Connecting the Power Supply To get your Power Supply up and running, follow these hookup and checkout procedures. 1. Mount the power supply The Power Supply is designed to be free standing, truss mounted, or rack mounted.
11 4. Connect and set the DMX512 source Connect the DMX512 signal source to the DMX input connector on the front of the power supply using standard DMX cable. The DMX signal will be indicated by a flashing green LED. The DMX signal will now position the gelstrings/vanes according to their respective DMX signal levels.
12 Note: Use the supplied thumb screws to clamp the hanger brackets to the desired pipe or truss. Power supply rack mounting The rack mount accessory can be used with up to two power supplies and allows them to be mounted into a 19-inch rack. Follow these steps to install the power supply into the rack mounting tray.
13 Cables Power/Data Cable The Power/Data Cable uses 4-pin XLR connectors on either end and consists of two 14 AWG conductors and a 22 AWG twisted, shielded pair. The shells of the two XLR connectors are not electrically connected together -- this prevents large power currents from flowing from chassis to chassis of the equipment.
14 Specifications PS-150, PS-300 and PS-600 Power Supply Connectors: DMX in: Male 5-pin XLR DMX out: Female 5-pin XLR Output: Female 4-pin XLR DMX512 termination: None – DMX signal pass thru Fuse: PS-150 (model 20150): Input voltage: 100-240V ~ 50/60 Hz 3-1.
15 Parts List To order any of the following items, contact your authorized WYBRON dealer. The PS Power Supplies 2015 0 .......................................................... PS-150 2030 0 .......................................................... PS-300 2060 0 .
16 Warranty Information WYBRON, INC. warrants to the original owner or retail customer that for a period of one year from date of delivery of a portable system or energization of a permanently install.
An important point after buying a device Wybron PS-150 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Wybron PS-150 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Wybron PS-150 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Wybron PS-150 you will learn all the available features of the product, as well as information on its operation. The information that you get Wybron PS-150 will certainly help you make a decision on the purchase.
If you already are a holder of Wybron PS-150, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Wybron PS-150.
However, one of the most important roles played by the user manual is to help in solving problems with Wybron PS-150. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Wybron PS-150 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
