Instruction/ maintenance manual of the product WG368E Worx
Go to page of 24
SAFETY AND OPERA TING MANUAL Cordles s Chain S aw WG36 8E WG36 8E. 9.
2 Cordles s Chain S aw WG36 8E WG36 8E. 9 GENERAL POWER TOOL SAFETY WARNINGS W ARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shoc k, fire and/or serious injury . Save all warnings and instructions for future r eference .
3 Cordles s Chain S aw WG36 8E WG36 8E. 9 4) POWER TOOL USE AND CARE a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for whic h it was designed. b) Do not use the power tool if the switch does not turn it on and off .
4 Cordles s Chain S aw WG36 8E WG36 8E. 9 4. W ear safety glasses and hearing protection. Further pr otective equipment for head, hands , legs and feet is recommended. Adequate protective clothing will reduce per sonal injury by flying debris or accidental contact with the saw c hain.
5 Cordles s Chain S aw WG36 8E WG36 8E. 9 SAFETY WARNINGS FOR BA TTERY P ACK a) Do not dismantle, open or shred cells or battery pack. b) Do not short-circuit a battery pack. Do not store battery packs haphazardly in a box or drawer wher e they may short-circuit each other or be short-circuited by conductive materials.
6 Cordles s Chain S aw WG36 8E WG36 8E. 9 W ARNING T o reduce the risk of injury , user must read instruction manual W ear ear protection W ear eye protection W ear dust mask Do not expose to moisture. Batteries may enter w ater cycle if disposed improperly , whic h can be hazardous for ecosystem.
7 Cordles s Chain S aw WG36 8E WG36 8E. 9 13 17 5 6 3 2 1 7 20 13 19 15 16 12 14 21 8 9 10 11 4 18.
8 Cordles s Chain S aw WG36 8E WG36 8E. 9 1. REAR HANDLE 2. ON/OFF SWITCH 3. LOCK-OFF BUTTON 4. OIL FILLER CAP 5. FRONT HANDLE 6. HAND GUARD 7. GUIDE BAR 8. CHAIN 9. GRIPPING TEETH 10. CHAIN TENSIONING KNOB 11. CHAIN COVER 12. DRIVE SPROCKET 13. CHAIN DIRECTION SYMBOL 14.
9 Cordles s Chain S aw WG36 8E WG36 8E. 9 TECHNICAL D A T A T ype WG368E WG368E.9 (3-designation of machinery , r epresentative of Chain Saw) WG368E WG368E.9 V oltage 40V Max* Bar length 30cm Cutting length 25cm Chain speed 3.8m/s Oil tank capacity 1 00ml Chain pitc h 9.
10 Cordles s Chain S aw WG36 8E WG36 8E. 9 INTENDED USE The c hain saw is intended for sawing of trees, tree trunks, branc hes, wooden beams, planks, etc. Cuts can be sawed with or across the grain. This product is not suitable for sawing mineral materials.
11 Cordles s Chain S aw WG36 8E WG36 8E. 9 W ARNING: Cutting edges on chain are sharp. Use protective gloves when handling chain. W ARNING: Maintain proper chain tension always. A loose chain will increase the risk of kickback. A loose chain may jump out of guide bar groove .
12 Cordles s Chain S aw WG36 8E WG36 8E. 9 provided between the oil filler cap and the strainer , to prevent leakage ensur e machine is left in a horizontal position (Oil Filler Cap (4) uppermost) when not in use. It is important to use only the recommended oil to avoid damage to the chain saw .
13 Cordles s Chain S aw WG36 8E WG36 8E. 9 push and slight pressure will be sufficient until a clic k is heard. Chec k to see if the bat tery is fully secured. NOTE: When r emoving the battery pack, hold it firmly to avoid dropping and injury . 4. BA TTER Y STA TUS LED’S (See Fig.
14 Cordles s Chain S aw WG36 8E WG36 8E. 9 4. Make sure your footing is firm. Keep feet shoulder width apart. Divide your weight evenly on both feet. 5. When ready to make a cut, push the Loc k-of f Button (3) completely in with the right thumb and squeeze the trigger .
15 Cordles s Chain S aw WG36 8E WG36 8E. 9 How to use saw safely 1 . Use the c hain saw only with secure footing. 2. Hold the chain saw at the right-hand side of your body (See Fig. L). 3. The Chain (8) must be running at full speed before it makes contact with the wood.
16 Cordles s Chain S aw WG36 8E WG36 8E. 9 after it is felled. An escape path should be planned and cleared as necessary before cuts are started. The escape path should extend bac k and diagonally to the rear of the expected line of fall.
17 Cordles s Chain S aw WG36 8E WG36 8E. 9 c hoc ks. Follow the simple directions for easy cutting. When the log is supported along its entire as illustrated, it is cut from the top (overbuc k). When the log is supported on one end, as illustrated, cut 1/3 the diameter from the underside (underbuck).
18 Cordles s Chain S aw WG36 8E WG36 8E. 9 2. Inspect c hain saw before and af ter eac h use. Chec k saw closely if guard or other part has been damaged. Chec k for an y damage that may affect operator safety or operation of saw. Chec k for alignment or binding of moving par ts.
19 Cordles s Chain S aw WG36 8E WG36 8E. 9 and make cutting difficult. After eac h use, with unit disconnected from power source, clean all sawdust from the guide bar and sproc ket hole. When rail top is uneven, use a flat file to restore square edges and sides.
20 Cordles s Chain S aw WG36 8E WG36 8E. 9 performing any service or maintenance on this tool. NOTE: It is not necessary to remo ve the c hain or bar when lubricating the sproc ket.
21 Cordles s Chain S aw WG36 8E WG36 8E. 9 TROUBLESHOOTING Symptom P ossible Causes P ossible Solution Chain saw fails to operate Out of battery Fuse faulty Charge the battery pac k Replace fuse Chain.
.
.
Copyright © 20 1 4, Positec. All Rights Reserved. 2CCS02APK1 1002A0.
An important point after buying a device Worx WG368E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Worx WG368E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Worx WG368E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Worx WG368E you will learn all the available features of the product, as well as information on its operation. The information that you get Worx WG368E will certainly help you make a decision on the purchase.
If you already are a holder of Worx WG368E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Worx WG368E.
However, one of the most important roles played by the user manual is to help in solving problems with Worx WG368E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Worx WG368E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
