Instruction/ maintenance manual of the product W1781 Woodstock
Go to page of 20
Phone: (360) 734-3482 • Online Technical Support: tech-support@shopfox.biz COPYRIGHT © JUNE, 2007 BY WOODSTOCK INTERNATIONAL, INC., REVISED DECEMBER, 2007 (JM) WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
.
Model W1781 21˚ Framing Nailer -1- Saf ety In st ruct ion s f or Pne uma ti c T ools 1. KEEP ALL SAFETY DEVICES IN PLACE and in working order. 2. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before operation.
Model W1781 21˚ Framing Nailer -2- 10. USE PROPER AIR HOSE for the tool. Make sure your air hose is in good condition and is long enough to reach your work without stretching. 11. WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry which may get caught in moving parts.
Model W1781 21˚ Framing Nailer -3- 1. HAND INJURIES: Do not place your hands near the nail point of entry. A nail can deflect and tear through the surface of the workpiece, puncturing your hand or fingers. 2. COMBUSTIBLE GASES: Never connect the nailer to pressurized oxygen or other combustible gases as a power source.
Model W1781 21˚ Framing Nailer -4- No list of safety guidelines can be complete. Every shop environment is different. Always consider safety first, as it applies to your individual working conditions. Use this and other tools with caution and respect.
Model W1781 21˚ Framing Nailer -5- The Mo del W1 781 is designe d to be oper ated at 8 0- 1 10 P SI usin g clean , dr y , regulated, compres sed a ir .
Model W1781 21˚ Framing Nailer -6- SETUP In ve n tory This tool has b een caref ully packag ed for saf e transpo rtation. If you notice the tool has been damaged dur ing s h ipping, please contact your author ized S hop F ox d eal er immediately .
Model W1781 21˚ Framing Nailer -7- A s af ety mechanism on the no se of the nai ler protects against accide ntal firing. When the trigger is pressed, the nail er will n ot fire u nti l the s af ety nose mechanism is depresse d. Before you u se yo ur nailer for the fir st time , check the saf ety nose mechanism to e nsure pro per fun ction.
Model W1781 21˚ Framing Nailer -8- OP ER A TION S Loa ding Whe n replacin g nails in your Mo del W1 781 , f ollow th ese guidelines: Type: .............................. Round Head Angle: ....................................... 21° Diameter: .......
Model W1781 21˚ Framing Nailer -9- 5. Pull the trigger. — If the nail drove into the wood far enough, continue with your intended operations. — If the nail either went too far or not far enough, then go to the Adjusting Depth section on this page.
Model W1781 21˚ Framing Nailer -10- A jamm ed nail must b e cleared before using the nai ler again. To clear a jammed nail from the dis- charge area, do these steps: 1. DISCONNECT NAILER FROM THE AIR SUPPLY! 2. Pull the magazine handle all the way back until it latches.
Model W1781 21˚ Framing Nailer -11- 6. Open the nose cover as if to clear a jammed nail. 7. Watch the discharge area and push the top of the piston with your finger.
Model W1781 21˚ Framing Nailer -12- C L E AN ING & L UBRICA TION C le an ing Use a go od solvent to clean the n ose asse mbly of the nailer . Always be sure that th e nailer is dr y before using it again.
Model W1781 21˚ Framing Nailer -13- P ARTS BREAK DO WN .
Model W1781 21˚ Framing Nailer -14- P ARTS L IST REF PART � # DESCRIPTION REF PART � # DESCRIPTION 1 X1781001 PISTON � REPAIR � KIT 50 XPSB03M CAP � SCREW � M5-.
Model W1781 21˚ Framing Nailer -15- T r ou b le sh oot i ng Symptom Possible Cause Cause Possible Solution Air leaking at tr ig- ger valv e area . 1. O-rings in trigger valve housing are damaged. 1. O-rings must be replaced & operation of safety nose must be checked.
.
CUT ALONG DOTTED LINE Name ___________________________________________________________________________________ Street __________________________________________________________________________________.
TAPE ALONG EDGES--PLEASE DO NOT STAPLE FOLD ALONG DOTTED LINE WOODSTOCK INTERNATIONAL INC. P.O. BOX 2309 BELLINGHAM, WA 98227-2309 Place Stamp Here FOLD ALONG DOTTED LINE.
An important point after buying a device Woodstock W1781 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Woodstock W1781 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Woodstock W1781 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Woodstock W1781 you will learn all the available features of the product, as well as information on its operation. The information that you get Woodstock W1781 will certainly help you make a decision on the purchase.
If you already are a holder of Woodstock W1781, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Woodstock W1781.
However, one of the most important roles played by the user manual is to help in solving problems with Woodstock W1781. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Woodstock W1781 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center