Instruction/ maintenance manual of the product W1226 Woodstock
Go to page of 2
MODEL W1226 PLANER PAL ® MINI PLANER PAL ® KNIFE SETTING JIG The Mini Planer Pal ® knife setting jig was specially designed for use on the 1 7 / 8 " diameter cutterheads that come on most portable 10" and 12" planers. With proper care, the Mini Planer Pal ® should pro- vide you with years of reliable knife setting service.
6. Hold the cutterhead with one hand and slide each jig until the indexing pin contacts the back edge of the gib slot. See Figure. Figure shows proper alignment (left side) of the Planer Pal™. 7. Use a flashlight to look down the length of the cutterhead to ensure that the knife is in contact with the middle magnet of both jigs.
An important point after buying a device Woodstock W1226 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Woodstock W1226 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Woodstock W1226 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Woodstock W1226 you will learn all the available features of the product, as well as information on its operation. The information that you get Woodstock W1226 will certainly help you make a decision on the purchase.
If you already are a holder of Woodstock W1226, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Woodstock W1226.
However, one of the most important roles played by the user manual is to help in solving problems with Woodstock W1226. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Woodstock W1226 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
