Instruction/ maintenance manual of the product RV-7042 Winegard
Go to page of 2
INST ALLING FC-5910 CONNECTORS ON COAX CABLE STEP 1: Strip outer cover back 1/2"* from end of cable. Fray braid back as far as outer cover will allow . STEP 2: Trim braid close to outer cover and remove 1/4"* of inner insulation being careful not to nick center conductor .
Figure 3 APPLICA TIONS AND AL TERNA TE CONNECTIONS INSTRUCTIONS STEP 1. Select location for wall plate and patio receptacle. Run two coax cables between locations and install connectors on each end. Mark cable s so "ca ble input" and "TV outpu t" may be identied.
An important point after buying a device Winegard RV-7042 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Winegard RV-7042 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Winegard RV-7042 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Winegard RV-7042 you will learn all the available features of the product, as well as information on its operation. The information that you get Winegard RV-7042 will certainly help you make a decision on the purchase.
If you already are a holder of Winegard RV-7042, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Winegard RV-7042.
However, one of the most important roles played by the user manual is to help in solving problems with Winegard RV-7042. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Winegard RV-7042 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
