Instruction/ maintenance manual of the product fluid 29 130 White
Go to page of 8
Mountain R acing Products, Inc 580 N. Westga te Dr. Grand Junction, CO 81505 USA 1.970.241.3518 www.whitebrotherscycling.com A Division Of.
1. NEVER REMOVE STEERER TUBE FROM CROWN. THIS IS A PRESSED IN PAR T. REMOVING IT WILL RENDER BOTH THE CROWN AND STEERER TUBE INOPERABLE.* MAKE SURE THE FORK CAPS AND ALL FORK HARDW ARE (brake bolts, pinch bolts, etc.) ARE TIGHT BEFORE EACH RIDE. 2. DO NOT PERFORM ANY MODIFICA TIONS OR ADJUSTMENTS THA T ARE NOT OUTLINED IN THIS MANUAL.
1. Remove your old fork from the bicycle. Measure the diameter and length of your old forks steerer tube to ensure that the White Brothers steerer tube is the correct diameter and sufficient length for the installation. 2. Remove the crown race from your old fork.
TUNING To get the most out of your White Brothers fork, it is important that you tune the fork to fit your weight, riding style and the terrain you ride. INITIAL BREAK-IN PERIOD: Y our new fork is designed to break-in over a period of 10 hours or more of riding.
MAINTENANCE Y our White Brothers fork requires periodic maintenance to ensure peak performance and long life. Neglecting proper maintenance will reduce the fork’s life. Internal build up of water and dirt or a lack of lubrication will cause excessive wear and void the warranty.
TROUBLE SHOOTING Fork Feels Sticky This is usually caused by: 1. A lack of lubrication. Clean and lubricate the fork as outlined in the maintenance section. 2. Contamination inside the fork. Clean and lubricate the fork as outlined in the maintenance section.
Exploded V iews The following is an illustration and parts table which gives you the exploded view of your White Brothers fork. The parts table indicates the part numbers for each individual part in the fork. Reference these numbers when ordering replacement parts.
Owners Name:___________________________________________________________________________ Address:_________________________________________________________________________________________________ ______.
An important point after buying a device White fluid 29 130 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought White fluid 29 130 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data White fluid 29 130 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, White fluid 29 130 you will learn all the available features of the product, as well as information on its operation. The information that you get White fluid 29 130 will certainly help you make a decision on the purchase.
If you already are a holder of White fluid 29 130, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime White fluid 29 130.
However, one of the most important roles played by the user manual is to help in solving problems with White fluid 29 130. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device White fluid 29 130 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
