Instruction/ maintenance manual of the product AKM 489 Whirlpool
Go to page of 13
17 INSTRUCTIONS FOR USE PRODUCT DESCRIPT ION AND SYMBOLS USING THE BURNERS PRACTICAL ADVICE ON USING THE HOB POSITIONING THE PAN SU PPORTS AND WOK SUPPORT HOOD AND CABINETRY CLEARANCES (MM) INJECTOR T.
18 PRODUCT DESCRIPTION AND SYMBOLS 1. Removable pan supports 2. 1 kWh auxiliary burner 3. 1.65 kWh semi-fast burn er 4. 3 kWh fast burne r 5. 1.65 kWh semi-fast burn er 6. Professional wok burner 7. Auxiliary burner control knob 8. Semi-fast burner control knob 9.
19 PRACTICAL ADVICE ON USING THE HOB Read the instructions to ge t the best out of your hob. • Use pans with a similar diameter to the burner (see the table on this page). • Use flat bottomed pans except with the wok support. • Do not use excessive water when cooking foods and use the lid.
20 HOOD AND CABINETRY CLEARANCES (MM) INJECTOR TABLE CATEGORY: II2H3+ Electric Power: 230 V - 50 Hz If a hood is to be installed abov e the hob, refer to the hood installation in structions to ensure the correct he ight above the hob.
21 WARNINGS AND SUGGESTIONS To get the most out of yo ur hob, please read the instructions carefull y and keep them for future consultati on. • These instructions are only valid in the countries whose destination symbol is show n on the serial number plate on the hob.
22 SAFEGUARDING THE ENVIRONMENT Packing The packing material is 100% recyclable and is labelled with the recycling symbol . Please dispose of all pa cking responsibl y and carefully. Product This appliance is marked according to the European Directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE) .
23 INSTALLATION (FLUSH AND TRADITIONAL FITTING) Technical information for the installer • This appliance can be i nstalled into a 20 mm - 50 mm thick wor ktop. • If no oven is to be installed be low the hob, a panel must be fitted under the hob to prevent hob damage and protect the cupboard co ntents.
24 ELECTRICAL CONNECTION FIXING THE HOB TO THE WORK TOP. TRADITIONALLY FITTED MODEL The electrical connecti ons must comply with current legislation and be carried out by a qualified, comp etent person. • Information on the vo ltage and power absorbed are shown on the serial no.
25 FIXING THE HOB TO THE WORK TOP. FLUSH FITTED MODEL Important: T he followin g procedur e must be carried out by compete nt technical personnel only. The hob can be instal led on, or into different types of mate rials, such as masonr y, metal, wood and heat resistant laminate coated wood (90°C).
26 ADAPTION TO A DIFFERENT TYPE OF GAS SUPPLY If you are using a different kind of gas from the one indicated on the s erial no. plate and the orange label on the back of the hob, you must replace the injectors; in the case of the Wok burner, adjust the primary air (see Injector table on page 6).
27 FITTING THE WOK BURNER REGULATING THE MINIMUM FLOW LEVEL OF THE GAS TAPS To fit the double crown wok burner: Insert in the following order: 1. burner ring (A) ; 2. decorative covering ring (B) ; 3. external burner cap (C) ; 4. internal burner cap (D) .
28 GENERAL CLEANING & MAINTENANCE Always disconnect the hob from the electrical power supply and wa it until it cools before cleaning and/or doing maintenance work. In order to keep your hob in good condition, you must keep it clean, removing any food residue each time you use it .
29 TROUBLESHOOTING GUIDE If the hob is not working properly, work through this guide before contacting our Customer Care Centre. The burner does not ignite, or the flame is unsteady? Check that: 1. the gas, or electricity supply has not been interrupted and that the control knob is turned fully on.
An important point after buying a device Whirlpool AKM 489 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool AKM 489 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool AKM 489 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool AKM 489 you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool AKM 489 will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool AKM 489, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool AKM 489.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool AKM 489. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool AKM 489 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
