Instruction/ maintenance manual of the product FT-18 Wells
Go to page of 14
WELLS MANUFA CTURI NG COMP ANY 2 ERI K CIRCLE , P . O . Box 280 V erd i, NV 8943 9 Cust omer Serv ice (77 5) 345 -0444 Ext .502 fa x: (775) 345- 0569 www .
Unless otherwise specified, all commercial cooking equip- ment manufactured by WELLS MFG. CO. is warranted against defects in materials and workmanship for a period of one year from the date of origin.
WARRANTY xi SPECIFICATIONS 1 FEATURES & OPERATING CONTROLS 2 PRECAUTIONS & GENERAL INFORMATION 3 AGENCY LISTING INFOR MATION 4 INSTALLATION 4 OPERATION 5 CLEANING INSTRUCTIONS 6 MAINTENANCE PROCEDURES 7 TROUBLESHOOTING SUGGESTIONS PARTS & SERVICE CUSTOMER SERVICE DATA Thank You for purchasing this Wells Manufacturing Co.
FEATURES & OPERATING CONTROLS (continued) 2.
This appliance is intended for u se in commercial establishments only. This appliance is intended to prepare food for hum an consumption. No other use is recommended or authorized by the manufacturer or its agents. Operators of this app liance m u st be familiar with the appl iance use, limitations and associated restrictions .
INSTALL A TION NOTE: DO NOT discard the carton or other packing materials un til you have inspected the appliance for hidden damage and tested it for proper operation. Refer to SHIPPING DAMAGE CLAIM PROCEDURE on the inside f ront cover of this manual.
OPERATION 5 WA RM-U P During warm-up, both display s flash w hile showing the last-used MENU temperature setpoint. A MENU cycle cannot be started while in w arm-up mode. When setpoint temperature is reach ed, the display stops flashing and the audible alert beeps 3 times.
CLEANING INSTRUCTIONS PRECAUTIONS: Press MENU 4 (c leaning mo de). Allow toaster to cool to 275ºF. NOTE: If MENU 4 has been programmed to anything other than 275º F, press PO W ER SWITCH OFF and allow unit to cool for at least 10 minutes. Be sure to w ear protective gloves.
A D JU ST PL A TEN TENSION 1. ADJUSTMENT LOCATION a. Right platen tension adjuster is located on back of the toaster, on back side of the right upright. b. Left platen tension adjuster is located on back of the toaster, on front side of the left upright.
STANDARD OPERATION NOTES: Standard pre-set MENU programs are as follow: PROGRAM T EMP TIME FUNCT ION 1 450º 00:14 2 450º 00:27 3 450º 00:35 4 275º 00:00 C LEANING On start-up or changing program setti ngs, the displ a y will flash until the new temperature setpoint is reached (i.
Set the time with MENU 3 (increas e) and MENU 4 (decrease). Press TEMP to save the time. The display will now advance to show zone temperature setpoints: 1.450 = Zone 1 @ 450ºF 2.450 = Zone 2 @ 450ºF 3.450 = Zone 3 @ 450ºF 4.450 = Zone 4 @ 450ºF Set the temperat ure setpoint for Zone 1 w ith MENU 3 (increase) and MENU 4 (decrease).
TROUBLESHOOTING SUGGESTIONS 10 SYMPTOM POSSIBLE CAUSE SUGGESTED REMEDY Toaster will not heat (no lights or display) Unplugged or circuit breaker tripped Plug toaster into appropriate circuit.
DESCRIPTI ON P A RT NO. CRUMBTRAY 503606 IMPORTANT: Use only factory authorized serv ice parts and replacement filters . For facto ry au thorized service, or to o rder factory author ized replacement parts, contac t your Wells authoriz ed service agency, or call: Well s Manufac turing C o .
WELL S M ANUFACTURI NG COMP ANY D IVIS ION OF C A RRI ER RE FRIG ER A T ION 2 E RIK CIR CL E, P . O. B ox 28 0 V er d i , NV 89439 Cust omer S ervi ce (77 5) 345 -0444 Ext.
An important point after buying a device Wells FT-18 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Wells FT-18 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Wells FT-18 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Wells FT-18 you will learn all the available features of the product, as well as information on its operation. The information that you get Wells FT-18 will certainly help you make a decision on the purchase.
If you already are a holder of Wells FT-18, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Wells FT-18.
However, one of the most important roles played by the user manual is to help in solving problems with Wells FT-18. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Wells FT-18 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
