Instruction/ maintenance manual of the product GA 250AL WAGNER
Go to page of 40
"? II 2GX (At ex 95) GA 250AL GA 400AL "? Edition 07 / 2005 Opera ting manual Automa tic Airless Spra y gun.
.
GA 250AL_GA 400AL . 3 OPERA TING MANU AL EDITION 07 /2005 P ART NO. DOC0 3 50941 C ont ents 1 ABOUT THESE INSTRUCTIONS 5 1.1 Languages 5 1.2 W arnings, notes and symbols in these instructions 5 2 GENERAL SAFET Y INSTRUCTIONS 6 2.1 Safety instructions for the operator 6 2.
GA 250AL_GA 400AL . 4 OPERA TING MANU AL EDITION 07 /2005 P ART NO. DOC0 3 50941 5.4 Wo r k 21 5.4.1 Start-up for airless spraying 21 5.4.2 Replacing the airless fl at jet nozzle 21 5.4.3 Cleaning the airless fl at jet nozzle 21 6 MAINTENANCE 22 6.1 Finishing w ork and Cleaning 23 6.
GA 250AL_GA 400AL . 5 OPERA TING MANU AL EDITION 07 /2005 P ART NO. DOC0 3 50941 1.1 LANGUA GES 1.2 W ARNINGS, NO TES AND SYMBOLS IN THESE INSTRUCTIONS 1 ABOUT THESE INSTRUCTIONS 4HISOPERATINGMA.
GA 250AL_GA 400AL . 6 OPERA TING MANU AL EDITION 07 /2005 P ART NO. DOC0 3 50941 2.1 SAFET Y INSTRUCTIONS FOR THE OPERA TOR 2.1.1 ELECTRICAL EQUIPMENT 2.
GA 250AL_GA 400AL . 7 OPERA TING MANU AL EDITION 07 /2005 P ART NO. DOC0 3 50941 2.2.2 EARTH THE UNIT 2.2.3 MA TERIAL HOSES 2.2.1 SAFE HANDLING OF W AGNER SPRA Y UNITS 4HESPRAYJETISUNDERPRESSUREANDCANCAUSEDANGEROUSINJURIE S ! VOIDINJECTIONOFPAINTORCLEANINGAGENTS .
GA 250AL_GA 400AL . 8 OPERA TING MANU AL EDITION 07 /2005 P ART NO. DOC0 3 50941 2.2.4 CLEANING 2.2.5 HANDLING HAZARDOUS LIQUIDS, V ARNISHES AND P AINTS 2.
GA 250AL_GA 400AL . 9 OPERA TING MANU AL EDITION 07 /2005 P ART NO. DOC0 3 50941 2.4 USE IN AN EXPL OSION HAZ ARD AREA 2.4.1 C ORRECT USE 2.4.2 EXPL OSION PROTECTION IDENTIFICA TION 2.
GA 250AL_GA 400AL . 10 OPERA TING MANU AL EDITION 07 /2005 P ART NO. DOC0 3 50941 3 PRODUCT LIABILIT Y AND W ARR ANT Y 3.2 W ARRANT Y 3.1 IMPORT ANT NOTES ON PRODUCT LIABILITY !S A RESULT OF.
GA 250AL_GA 400AL . 11 OPERA TING MANU AL EDITION 07 /2005 P ART NO. DOC0 3 50941 3.3 CE-C ONFORMIT Y 3.4 GERMAN REGU AL TIONS AND GUIDELINES GA 250AL, GA 400AL 0350907 3HORTEXPLANATION #%.
GA 250AL_GA 400AL . 12 OPERA TING MANU AL EDITION 07 /2005 P ART NO. DOC0 3 50941 4 DESCRIPTION 4.1 T YPICAL APPLICA TIONS, USING IN AC CORDANCE WITH THE INSTRUCTIONS The gun is suitable for atomising liquid mat erials, particularly coating materials, using the Airless-process.
GA 250AL_GA 400AL . 13 OPERA TING MANU AL EDITION 07 /2005 P ART NO. DOC0 3 50941 Part No . Description 0350032 A utomatic gun GA 400AL 0350080 A utomatic gun GA 400AL USA 0350033 A utomatic gun GA 250AL 0350081 A utomatic gun GA 250AL USA The standard equipment includes: Quantity Part No .
GA 250AL_GA 400AL . 14 MM IN MM IN MM IN ' MM IN IN ' "? ø OPERA TING MANU AL EDITION 07 /2005 P ART NO.
GA 250AL_GA 400AL . 15 " ! # $ % & $ "? ( " $ ' # ) & "? OPERA TING MANU AL EDITION 07 /2005 P ART NO.
GA 250AL_GA 400AL . 16 ! " # $ % & ' ( ) "? OPERA TING MANU AL EDITION 07 /2005 P ART NO. DOC0 3 50941 5 ST ARTING UP AND OPERA TION 5.1 SET UP AND C ONNECT The spray gun must be used a part of an Airless spraying system.
GA 250AL_GA 400AL . 17 OPERA TING MANU AL EDITION 07 /2005 P ART NO. DOC0 3 50941 5.1.2 VENTILA TION OF THE SPR A Y BOO TH 5.1.3 FL UID (P AINT ) HOSES 7 !2.
GA 250AL_GA 400AL . 18 OPERA TING MANU AL EDITION 07 /2005 P ART NO. DOC0 3 50941 5.1.4 EARTHING THE SY STEM Any material containers and the unit must be c onnec ted by a potential equalisation (earth) cable.
GA 250AL_GA 400AL . 19 MILLI0ASCALX 3ECM0AS #ENTIPOISE 0 OISE $).#UP MMIN & ORD#UP :AHN .
GA 250AL_GA 400AL . 20 X- "? OPERA TING MANU AL EDITION 07 /2005 P ART NO. DOC0 3 50941 5.3 ST ART-UP 5.3.1 GENERAL RULES FOR HANDLING THE SPR A Y GUN ➞ See SAFET Y REGULA TIONS in Chapter 2 5.
GA 250AL_GA 400AL . 21 ! % $ # " "? OPERA TING MANU AL EDITION 07 /2005 P ART NO. DOC0 3 50941 5.4 WORK 5.4.1 ST ART-UP FOR AIRLESS SPRA YING 1. Switch on the material supply (adjust fr om approx. 150 bar; 15 MP a; 2175 psi), and the control unit.
GA 250AL_GA 400AL . 22 OPERA TING MANU AL EDITION 07 /2005 P ART NO. DOC0 3 50941 6 MAINTENANCE ➞ See SAFET Y REGULA TIONS in Chapter 2. The cleaning solvent used f or this must be suitable for the spray material.
GA 250AL_GA 400AL . 23 ! " # $ 37 % "? OPERA TING MANU AL EDITION 07 /2005 P ART NO. DOC0 3 50941 6.1 FINISHING WORK AND CLEANING 1. Ensure that the material pressure has been relieved and int errupt the air supply to the gun.
GA 250AL_GA 400AL . 24 % & ' ) ( + ( ' ) + "? OPERA TING MANU AL EDITION 07 /2005 P ART NO. DOC0 3 50941 6.2.2 REASSEMBLING THE V AL VE STEM AND THE SPRA Y GUN 1. Place the sealing screw (F), the packing (G), the thrust piece (H), the disc spring set (6 pieces) (I), and the pressure ring (K) on the valve st em (E).
GA 250AL_GA 400AL . 25 OPERA TING MANU AL EDITION 07 /2005 P ART NO. DOC0 3 50941 7 TROUBLESHOO TING AND SOL UTIONS Problem Cause Solution Paint output t oo low • Nozzle too small •Select larger nozzle (see chapter . 8.1) • Paint pr essure too low • Adjust material pressur e required .
GA 250AL_GA 400AL . 26 "? ² ² .
GA 250AL_GA 400AL . 27 "? ² ² .
GA 250AL_GA 400AL . 28 "? ² ² .
GA 250AL_GA 400AL . 29 OPERA TING MANU AL EDITION 07 /2005 P ART NO. DOC0 3 50941 8.2 HOSES Part No . Description 9981939 Air hose , polyamide red 6/4 mm; 0.24/0.16 in (Length giv en in meters) 9987008 HP-hose DN10, 15m; 49.21 ft; 530 bar; 53 MPa; 7687 psi, M16x1.
GA 250AL_GA 400AL . 30 OPERA TING MANU AL EDITION 07 /2005 P ART NO. DOC0 3 50941 9 SP ARE P ART S 9.1 HOW TO ORDER SP ARE P ARTS? !LWAYSSUPPLYTHEFOLLOWINGINF ORMATIONTOENSUREDELIVER YOFT HERIGHTSPAREPART 0ART.
GA 250AL_GA 400AL . 31 OPERA TING MANU AL EDITION 07 /2005 P ART NO. DOC0 3 50941.
GA 250AL_GA 400AL . 32 "? OPERA TING MANU AL EDITION 07 /2005 P ART NO.
GA 250AL_GA 400AL . 33 OPERA TING MANU AL EDITION 07 /2005 P ART NO. DOC0 3 50941 Item K Qty Part Nr . Description 1 1 0350 481 Piston 2 1 0350 482 Compr ession spring 400 bar; 40 MPa; 5800 psi 3 ● 1 0090 xxx Standard nozzle .
GA 250AL_GA 400AL . 34 "? OPERA TING MANU AL EDITION 07 /2005 P ART NO.
GA 250AL_GA 400AL . 35 OPERA TING MANU AL EDITION 07 /2005 P ART NO. DOC0 3 50941 Item K Qty Part-Nr . Description 1 1 0350481 Piston 2 1 0350498 Compression spring 250 bar; 25 MPa; 3626 psi red marked 3 ● 1 0090xxx Standard nozzle .
GA 250AL_GA 400AL . 36 OPERA TING MANU AL EDITION 07 /2005 P ART NO. DOC0 3 50941.
GA 250AL_GA 400AL . 37 OPERA TING MANU AL EDITION 07 /2005 P ART NO. DOC0 3 50941 'ERMANY * 7 !'.%2'MB( /TTO,ILIENTHAL3TR 0OSTFACH $.
.
.
/RDERNUMBER 'ERMANY * 7 !'.%2'MB( /TTO,ILIENTHAL3TR 0OSTFACH $ -ARKDOR F 4 ELEPHONE.
An important point after buying a device WAGNER GA 250AL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought WAGNER GA 250AL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data WAGNER GA 250AL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, WAGNER GA 250AL you will learn all the available features of the product, as well as information on its operation. The information that you get WAGNER GA 250AL will certainly help you make a decision on the purchase.
If you already are a holder of WAGNER GA 250AL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime WAGNER GA 250AL.
However, one of the most important roles played by the user manual is to help in solving problems with WAGNER GA 250AL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device WAGNER GA 250AL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
