Instruction/ maintenance manual of the product QL-3100B Wachsmuth & Krogmann
Go to page of 25
1,595 PSI Electric Pressure Washer Item#3686-05 Model # QL-3100B PLEASE READ AND SAVE ALL INSTRU CTIO NS TO ENSURE THE SAFE AND EFFECTIVE USE OF THIS TOOL.
1 TABLE OF CONTENTS Index P. 1 Important Safety Instructio ns P. 2-3 General Safety Instructi ons P. 4-6 List of Main Parts P. 7-8 Tech. Specifications C ontents of Pack aging P. 9 Assemby P. 10-14 Operation P. 15-19 Maintenance P. 20 Trouble Shooting P.
2 IMPORTANT SAFETY INSTRUCTIONS PLEASE READ AND S AVE THESE INSTRU CTIONS. Read c arefully before attempting to assemble, install , operate or maintain this product.
3 18. Disconnect power plug from the outlet when not in use and prior to the detaching of the pressure hose. 19. Never tie knots or kinks the pressu re hose as damage can result. 20. Prior to starting the pressure washer in co ld weather, be sure ice has not formed in any part of the appliance.
4 GENERAL SAFETY RULES WARNING! Read, understan d and save all instruct ions. Failure to fol low all instructions listed belo w may result in electric sh ock , fire or serious personal injury. The warnings, caution s, and instruct ions discussed in this inst ruction manua l cann ot cover all possible conditions and situatio ns that may occur.
4. Store idle tools out of reach of c hildre n and other untrained persons. Tools are dangerous in the hands of untrained users . They should be kept away from work area. 5. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the tool s operatio n.
6 WIRE SIZES Make sure the proper extension cord is used and is in good condition . T he use of any extension cord w ill cau se some loss of power. To keep th is t o a minimum and to prevent overheating and motor burnout, us e the table bel ow to determine the minimum wire size (A.
7 LIST OF MAIN PARTS PARTS DESCRIPTION 1. Motor Housing 2. Black Plastic Hooks 3. Handle 4. High Pressure Hose 5. Handle Frame 6. Gun Lance 7. Back Wheel 8. Soap Spray Bottle 9. Turbo Nozzle 10. Spray Nozzle 11. GFCI Power Plug 12. Power Cord FIG. 1 13.
29. Gun Lance Connec ter 30. Pressure Washer Connector FIG. 5 31. Male High Pressure Connector 32. Soap Spray nozzle 33. Soap Spray Bottle FIG. 6 34. Over Load Switch 35.
9 TECHNICAL SPECIFICATIONS: Model Number QL-3100B Rating Voltage 100-120v Frequency 60Hz Power 1500w Protection category IPX5 Working Pressure 1500 PSI Max.
ASSEMBLY 1. Using a set of small pliers, att ach a wheel clip to one side of the wheel axle. FIG. 8 2. Tighten the wheel cl ip until you hear a snap. The click sound indicates that the wheel clip is secured. FIG. 9 3. From the opposite side of the wheel clip slide one of the back wheels onto the wheel axle.
6. Slide the wheel axle into the pressure washer housing. (Note: If wheel axle does not slide easily try sliding wh eel axle through the other side of pressure washer housing or try greasing the axle.) FIG. 12 7. On the other side of the pressure washer housing pull the w heel axle all the way out.
10. Place wheel cover over wheel cap and push down to secure. FIG. 16 11. Insert rubber foot screw into rubber foot. FIG. 17 12. Screw rubber foot into pressure washer housing. Note: Only tighten unt il it feels snug. If over tighten ed the screw will cut through rubber .
14. Place handle on top of motor housi ng. FIG. 20 15. Insert handle frame on the opposite side of handle. FIG. 21 16. Screw 2 x 7/8” black screws into lower pair of handle screw holes and secure. FIG. 22 17. Insert black plastic hook into slot on handle.
18. Screw 2 x 7/8” black screws into holes on the black plastic hook and secure onto handle. FIG. 24 19. At the back of the motor housing attach the second black plastic hook to housing. Screw 2 x 7/8” black screws into holes on the black plastic hook and secure to motor housing.
OPERATION HIGH PRESSURE PIPE CONNECTION Connect the nozzl e to the gun lance by screwing it t ogether. FIG. 28 Screw the gun lance co nnector into the gun lance. FIG. 29 Screw the pressure hose with connector into the high pressure outlet on the back of the pressure washer.
CONNECTION OF THE WATER SUPPLY TO THE PRESSURE WASHER Connect the water s upply to the water i nlet on the front o f the pressure i nlet. Turn on water supply. FIG. 31 LOCKING AND UNLOCKING THE TRIGGER ON THE GUN LANCE The trigger lock is meant to prevent the uni ntentional discharge of the spray gun.
How to turn on pressure was her: Operate the pressure washer in vertical position only after connecting the wa ter supply to the water inlet and water suppl y has been turned on. Switch power switch to ON. Position the spray g un on the object to be cleaned.
2. TURBO NOZZLE - Sometimes referred to as a rota ry nozzle, is a very eff ect ive tool that can significantl y reduce cleaning time. The turbo nozzle combines the power of a narrow high impact stre am and the efficiency of a 25 degre e fan pattern.
5. Screw soap spray bottle onto lance. FIG. 39 Spray bottle operation - When cleaning with the pressure washer, some cleaning tasks can be solved with wa ter alone, but for most tasks it is advantageous to use a detergent. A detergent ensures a quick soaking and allows high pressure water to penetrate and re move the dirt more effectively.
MAINTENANCE CAUTION: Before undert aking any work on the appliance always turn power switch OFF and deta ch the plug fr om the power socket. Undertake only the maintena nce operations described in the user instructions.
21 TROUBLE SHOOTING Trouble Possible Cause Solution Pressure drops or oscillations - Lack of water - Nozzle is dirty - Open the water tap - Clean the nozzle of possible debris with tip cleaner.
22 LIMITED WARRANTY Thank you for purchasing a top quality King Craft product. This Pressure Washer item #3686-05 was tes ted and meets our stringent quality standards.
WARRANTY CARD Electric Pressure Washer, item # 3686-05, model #QL-3100B In case you find thi s product to be defective please send it within the warranty period to our service center. To avoid transport d amages please send the product in th e original packaging.
ORDER FORM FOR REPLACEMENT GUN LANCE, PRESSURE HOSE, SPRAY NOZZLE, AND TURBO NOZZLE Price per Gun Lance (includes shipping and handling $ 17.00) Price per Pressure Hose (includes shipping and h andling $ 14.00) Price per Spray Nozzle (includes shipping and handling $ 10.
An important point after buying a device Wachsmuth & Krogmann QL-3100B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Wachsmuth & Krogmann QL-3100B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Wachsmuth & Krogmann QL-3100B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Wachsmuth & Krogmann QL-3100B you will learn all the available features of the product, as well as information on its operation. The information that you get Wachsmuth & Krogmann QL-3100B will certainly help you make a decision on the purchase.
If you already are a holder of Wachsmuth & Krogmann QL-3100B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Wachsmuth & Krogmann QL-3100B.
However, one of the most important roles played by the user manual is to help in solving problems with Wachsmuth & Krogmann QL-3100B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Wachsmuth & Krogmann QL-3100B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
