Instruction/ maintenance manual of the product MIQ-FE-65 Wachsmuth & Krogmann
Go to page of 13
5.5 Amp Orbital Jigsaw with Laser Item# 5926-06 Model # MIQ-FE-65 PLEASE READ AND SAVE ALL INSTRU CTIO NS TO ENSURE THE SAFE AND EFFECTIVE USE OF THIS TOOL.
1 TABLE OF CONTENTS Table of Contents P.1 Important Safety Instructio ns P. 2 Rules for Safe Operation P.3 General Safety Rules P.4-5 List of Main Parts, Technical Specifications, Contents of Packaging P.6 Adjustments, Inserting and Removing Saw Blades P.
2 IMPORTANT SAFETY INSTRUCTIONS PLEASE READ AND S AVE THESE INSTRU CTIONS CAREFULLY TO ENSURE THE SAFE AND EFFECTIVE USE OF THIS TOOL. Safe operation of this power tool requires that you read and understand thi s operators manual and all labels af fixed to the tool.
3 RULES FOR SAFE OPERATION SAVE THESE INSTRUCTIONS WARNING: Some dust created by power sanding, sawing , grinding, d rilling, and other cons truction activities contains c h emicals known to cause cancer, birth defects or other reproductive harm.
4 GENERAL SAFETY RULES WARNING! Read, understan d and save all instruct ions. Failure to fol low all instructions listed belo w may result in electric sh ock , fire or serious personal injury. The warnings, caution s, and instruct ions discussed in this inst ruction manua l cann ot cover all possible conditions and situatio ns that may occur.
5 5. Do not overreach. Keep proper footing an d balance at all times. Proper footin g and balance enables better cont rol of th e tool in unexpected situations. 6. Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or heari ng protection must be used for appropriate conditions.
LIST OF MAIN PARTS 1. Rocker Switch for Laser Guide 2. On/Off Trigger Switch 3. Locking Button 4. Dust Output /Vacuum Adapter 5. Hex Key Storage 6. Cutting M ode Selector 7.
ADJUSTMENTS Inserting and Removing Saw Blades The following is a gu ide for installation an d removal of saw blade. Warning: Before installing or changing a blade, be sure the sa w is unplugged from the power supply. 1. Loosen the two blade lock bolts (use h ex key supplied) enough for a blade to be removed or inserted.
OPERATION How to Start Jigsaw 1. Before you start make sure your saw blade and guard is secure. 2. Plug cord into power outlet. 3. Place saw near cutting surface. Make sure saw blade is down. 4. Position Speed Adjust Dial to desired stroke rate. 5. To start saw, press and hold the On/Off trigger switch.
Bevel Cutting Warning: Before adjusting the cutting angles, be sure the saw is unplugged fro m the power supply. The base plate can be tilted to cut any a n gle between 0 and 45 degrees right and left. Loosen the base plate adjustme nt screw and then rotate the base pl ate left or right to the desired angle.
Laser Guide Line The saw is equipped with a battery powered laser guide which is designed to aid alignment of the blade with yo ur cutting line. Push the rocker switch located on the battery compartment cover of t he laser guide to turn it O n or Off.
11 LIMITED WARRANTY Thank you for purchasing a top quality KingCraft prod uct. This Orbital Jig Saw with Laser item #5926-06 was tested and meets our string ent quality standard s.
WARRANTY CARD Kingcraft Orbital Jigsaw with Laser, Item # 5926-06, Model #MIQ-FE-65 In case you find this product to be defe ctive please send it within the warranty period to our service center. To av oid transport damages plea se send the product in the original packaging.
An important point after buying a device Wachsmuth & Krogmann MIQ-FE-65 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Wachsmuth & Krogmann MIQ-FE-65 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Wachsmuth & Krogmann MIQ-FE-65 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Wachsmuth & Krogmann MIQ-FE-65 you will learn all the available features of the product, as well as information on its operation. The information that you get Wachsmuth & Krogmann MIQ-FE-65 will certainly help you make a decision on the purchase.
If you already are a holder of Wachsmuth & Krogmann MIQ-FE-65, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Wachsmuth & Krogmann MIQ-FE-65.
However, one of the most important roles played by the user manual is to help in solving problems with Wachsmuth & Krogmann MIQ-FE-65. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Wachsmuth & Krogmann MIQ-FE-65 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
