Instruction/ maintenance manual of the product DVA-2WA Viking
Go to page of 6
The DV A-2W A is a digital announcer with a built in 2 watt amplifier . Designed to provide music and promotion on hold, the DV A-2W A can playback in a continuous loop or alternate between promotions and an auxiliary music source in timed intervals. Any number of multiple mes- sages may be recorded.
I I n n s s t t a a l l l l a a t t i i o o n n VIKING © MODEL D V A-2W A VIKING ELECTRONICS HUDSON, WI 54016 DIGIT AL ANNOUNCER WITH 2 W A TT AMPLIFIER POWER 12V DC ST ATUS LED AUX. AUDIO INPUT/MOH RECORD AUDIO INPUT (MIC/T APE) HANDSET REC/MONITOR ST ART/STOP DEF AUL T MSG.
This application is ideal for situations in which a momentary contact closure will trigger the announcement or message. Once triggered, the unit will play its entire message. When the message has finished, the switch can be activated again to play the next message (or repeat the first message if only one is recorded).
In this application, the RAD-1 will answer the line and trigger the message on the DV A-2W A to play from the beginning. 1. Connect as shown. 2. Remove JP1 . 3. Program the RAD-1 as shown in Fax Back Document 410 . Important: The RAD-1 “Call Timer” must be programmed to a time long enough for the DV A-2W A to play its entire message.
B. Recording from a T ape, CD Player or Any Line Level Source (PC sound card, etc) 1. Place DIP switch 1 in the OFF position and disconnect any background music source from the Aux Audio input. 2. Set the volume on the tape/CD player to a middle setting.
Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or subsidiaries assume no responsibility for errors and omissions contained in this information.
An important point after buying a device Viking DVA-2WA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Viking DVA-2WA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Viking DVA-2WA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Viking DVA-2WA you will learn all the available features of the product, as well as information on its operation. The information that you get Viking DVA-2WA will certainly help you make a decision on the purchase.
If you already are a holder of Viking DVA-2WA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Viking DVA-2WA.
However, one of the most important roles played by the user manual is to help in solving problems with Viking DVA-2WA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Viking DVA-2WA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
