Instruction/ maintenance manual of the product BDT-2500 Vestax
Go to page of 12
OWNER'S MANUAL.
1 The lightning flash with arrowhead symbol ， within an equilateral triangle ， is intended to alert the user to the presence of uninsulated “ dangerous voltage ” within the product's encl.
2 1. Read instructions-All the safety and operating instructions should be read before the appliance is operated. 2 . Retain instructions-The safety and operating instructions should be retained for future reference. 3. Heed W arnings-All warnings on the appliance and in the operating instructions should be adhered to.
3 16. Object and Liquid Entry-Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
4 ● Before detaching or attaching the headshell, be sure to turn the power of the amplifier or mixer to the OFF position. ● Detaching or attaching of the headshell with the volume control up may cause damage to the speakers. ● Do not turn on the tur ntable with the platter removed.
5 EACH P ARTS NAME BEFORE USE q Power Switch w Turntable Platter e Center Spindle r Balance Weight t Arm Rest y Tone Arm u Main Pitch Control i Fine Pitch Control o Cartridge/Headshell !0 Speed Select.
6 ASSEMBL Y AND SET -UP platter platter q Place the turntable platter onto the center spindle. w Pull the drive belt from the center ring on the platter over the motor pulley. Be careful not to twist the belt. e Rotate the platter by hand to ensure proper seating of the belt.
7 CONNECTION TO INPUT JACK INSTALLATION CONNECTION TO POWER PLUG CONNECTION ● USING PHONO INPUT Set phono-amp bypass switch to "phono" position and connect RCA cable to phono input on mixer/pre-amp. Connect the AC power cord to suitable outlet.
8 CONNECTION DIAGRAM(EXAMPLE) speaker speake speaker speaker mixer to phono input on mixer/per-amp to phono in of amp 【 the case of using mixer 】 （ex. Vestax PMC-03A） 【 connection to amp 】 line out of mixer to line in of amp speaker speake speaker speaker amp to line input ( i.
.
10 Adjustment of Anti-skating Control PITCH CONTROL ADJUSTMENT OPERA TION Exceeding stylus pressure r ecommendations may couse skipping and/ or reduce stylus life. Note Use EP adaptor for EP playback. Note When operating in SP mode, the special cartridge "VR-7SP" is recommended.
V estax Corpor ation AUG.2000 BDT2500 CHANGE OF THE STYLUS TIP CHANGE OF THE CARTRIDGE q Turn off the power switch of BDT-2500 and amp. w Loosen the lock ring,remove the cartridge from tonearm. e Remove the stylus tip from cartridge unit. r Insert the new stylus tip to cartridge unit.
An important point after buying a device Vestax BDT-2500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vestax BDT-2500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vestax BDT-2500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vestax BDT-2500 you will learn all the available features of the product, as well as information on its operation. The information that you get Vestax BDT-2500 will certainly help you make a decision on the purchase.
If you already are a holder of Vestax BDT-2500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vestax BDT-2500.
However, one of the most important roles played by the user manual is to help in solving problems with Vestax BDT-2500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vestax BDT-2500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
