Instruction/ maintenance manual of the product W20 F Varimixer
Go to page of 36
SPARE PART AND OPERATION MANUAL FOOD MIXER Model W20 A, J, F 1993 to Present March 2007 Form 103.
Caution -READ BEFORE OPERATING- Caution Varimixer recommends that mixer operators be at least 18 years of age and be thoroughly trained on the use of the mixer. Varimixer recommends that the following precautions be adopted to help make the mixer operation safer and more efficient.
Varimixer warrants its commercial mixers to the original purchaser against defects in material or manufacture for a period of one year from the date of original purchase, subject to the following exclusions and limitations. The warranties provided by Varimixer do not apply in the following instances: 1.
TABLE OF CONTENTS Installation Instructions...................................................................................................2 Cleaning Instructions .....................................................................................
INSTALLATION - CLEANING - MAINTENANCE INSTALLATION : The mixer can be placed directly on the floor. Foundation bolts in the floor are necessary only under special conditions, e.g. in ships. If the 20-quart mixer is placed on a bench stand, it must be fastened with the bolts that fasten the unit to the shipping pallet.
3 Varimixer Operating Instructions W20 OVERLOADING: Do not overload the mixer. Tough and heavy doughs might reduce the working capacity of the mixer by 75%. The capacity will be further reduced if the speed of the tool is increased beyond what is recommended, or if a wrong tool is used.
4 Dimesion Data Level Capacity of large bowl Qt. 21 Level Capacity of small bowl Qt. 13 Width Overall In. 17 7/8 Depth Overall In. 26 1/2 Height Overall In 34 7/8 Electrical Data for Motor** 60HZ / 1 Phase Voltage* V 115 Feed Wires incl. Ground No. 3 Motor Power HP 1 Amperes,full load A 12 Mixing Speed Agitator Speed Min.
5 SERVICE INSTRUCTIONS 5 55 3 21 4 40 41 9 7 22 1 10 6 8 42 43 2 16 17 18 20 19 44.
(1) Remove the top cover of the mixer (1) and the plastic cover (43) by removing the 2 screws (3) The attachment engagement hub is taken out by removing the plastic cover (4) and the 4 bolts (5). (6) The control box is taken off by removing the 2 screws (55).
The planetary head is removed in the following way: a) The top cover of the mixer (1), the attachment engagement hub (3), the special V-belt (7), and the control box (6) are removed.
Mounting of the planetary head should be done in reverse order. When the lower fork (15) and the spring (34) are mounted, the speed selector lever (8) is turned counter clockwise, so that it points hori - zontally backward, at the same time as the lower fork is pressed down gently.
9 (45) The bowl arms are to be replaced in the following way: a) Disconnect the mixer on the main switch or disconnect the connecting cable. b) Lower the bowl arms. c) Place the mixer on its back and remove the legs of the mixer (17) by removing the screws (18).
10.
11 Body 2 1 3 5 6 4 7 8 9 10 11 12 13 14 15 16 19 17 21 20 18.
Body 12 Figure Number Description Part Number 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. Screw Top Lid (Painted) Rear Access Plate Bushing (Lift Handle) Upper Column Pl.
13 Bowl Arms 1 3 4 5 8 9 6 7 12 11 10 14 16 15 2 13 20N-65.1M 20N-62Z 20N-65.1Z 17 18 19 56RN20-15 20 22 21.
14 Bowl Arms Figure Number Description Part Number Ball (Black) Bowl Lift Lever Washer Disc Retaining Disc Crank Arm Cotter Pin Key Snap Ring Lift Nut Jam Nut Lift Bolt Bowl Arm Shaft Snap Ring 25U Bo.
15 Pulley System 8 9 16 13 14 12 7 10 3 4 35 2 6 18 12 20 21 1 28 26 23 32 30 27 25 27 31 24 29 27 37 36 38 34 40 33 32 5.
16 Pulley System Figure Number Description Part Number Belt Grease Nipple Bolt M6x16 Motor Mount Plate Bolt 3/8-16 X 3/4 Washer Motor Pulley Pin Grease Nipple Snap Ring Set Screw ------------ Bushing .
Pulley System Model W20P Single Speed Pizza Mixer 3 4 1 2 5 6 7 8.
Pulley System Model W20P Single Speed Pizza Mixer Figure Number Description Part Number Belt Motor Pulley Planetary Pulley Bolt 3/8-16X3/4 Washer Bolt M6X16 Washer Motor 20P-91 6J19 6J60 STA 5442 STA 6009 STA 5432 STA 6008 20D-85.64 1. 2. 3. 4. 5. 6. 7.
17 Planetary Head 31 33 34 35 27 28 29 30 25 26 14 15 16 17 18 19 12 20 21 22 23 10 9 4 6 7 8 1 2 3 20N-2.1Z 20N-3 20N-2 20N-2.1Z 20N-30 20-33 20-36 20N-101 5 11 24 32 13.
Planetary Head 18 Figure Number Description Part Number Snap Ring Bearing 6206 Snap Ring Bolt M6X16 Main Bearing Head Snap Ring Bearing 6206 Distance Piece Gear Wheel Rim Bolt M8X30 Main Shaft Snap Ri.
19 Attachment Drive 11 3 12 14 13 7 6 4 5 9 10 8 20N-10.6M 1 2 20N-10.6M #12 Hub 20N-10.5M #17 Hub 2” I.D. 1 1/2” I.D. 15.
20 Attachment Drive Figure Number Description Part Number Snap Ring Wormwheel Snap Ring Bearing Distance Piece Bearing Key Shaft F/ #17 Hub Shaft F/ #12 Hub O-ring Hub F/ #17 ( 2” I.
21 Electrical Components 1993-mid 1997 3 3A 2 1 4 5 6 10 8 7 12 11 17 15 14 16 9.
22 Electrical Components 1993-mid 1997 Figure Number Description Part Number Front Panel No Hub Front Panel w/Hub Front Foil No Hub Front Foil w/ Hub Stop Button Complete Start Button Complete Timer A.
14 13 1 11 15 10 3 4 6 7 8 9 2 5 16 18 19 17 12 6A 23 Electrical Components 1998-Present.
24 Electrical Components 1998-Present Figure Number Description Part Number Start Switch Assembly Stop Switch Assembly Timer Assembly 115V Timer Knob Timer Scale Front Panel Assembly No Hub Front Pane.
25 Bowl Screen 1 13 5 6 12 2 3 4 7 8 9 10 11 17 16 18 14 15.
Bowl Screen 26 Figure Number Description Part Number Bowl Screen Kit Bushing Cam Set Screw Screw Microswitch Set Screw Cam Spacer Bolt Nut Bushing Bracket Assembly Nut Bolt Rear Screen Front Screen Chute 225/20N 56SN20-21.1 56SN20-21 STA 5664 STA 5251 56SN20-30 STA 5664 56SN20-22.
27 Tools and Attachments 1, 2 19 19 19 4, 5 6, 7 8 12, 13 21, 21A 22, 22A 27 23, 23A 19 25 26 24 ,3 19 19 16 20.
28 Tools and Attachments Figure Number Description Part Number S/S Bowl 20Qt S/S Bowl 12Qt. S/S Bowl 25Qt. S/S Hook 20Qt. S/S Hook 12Qt. Flat Beater 20Qt. Flat Beater 12Qt. S/S Flat Beater 20 Qt. Wire Whip 20 Qt. Wire Whip 12 Qt. S/S Wing Whip 20 Qt. Pin Rack Bowl Scraper 20 Qt.
.
Timer Motor.
5489 Campus Drive Shreveport LA 71129 (800) 222-1138 (318) 635-3131 Fax www.varimixer.com.
An important point after buying a device Varimixer W20 F (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Varimixer W20 F yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Varimixer W20 F - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Varimixer W20 F you will learn all the available features of the product, as well as information on its operation. The information that you get Varimixer W20 F will certainly help you make a decision on the purchase.
If you already are a holder of Varimixer W20 F, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Varimixer W20 F.
However, one of the most important roles played by the user manual is to help in solving problems with Varimixer W20 F. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Varimixer W20 F along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
