Instruction/ maintenance manual of the product HF-251 Univex
Go to page of 2
High-Frequency Arc Starter and Stabilizer Issued August 2007 • Index No. AY/5.0 Processes Gas Tungsten Arc Welding (TIG) Input Power 1-Phase Power Rated Output 250 A, 60% Duty Cycle Weight HF-251D-1.
Genuine Miller Options and Accessories Secondary Contactor Kit For HF-251D-1 model #041 969 Field only For HF-251-2 model #041 906 Field only Mounts inside HF-251 cabinet.
An important point after buying a device Univex HF-251 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Univex HF-251 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Univex HF-251 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Univex HF-251 you will learn all the available features of the product, as well as information on its operation. The information that you get Univex HF-251 will certainly help you make a decision on the purchase.
If you already are a holder of Univex HF-251, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Univex HF-251.
However, one of the most important roles played by the user manual is to help in solving problems with Univex HF-251. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Univex HF-251 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
