Instruction/ maintenance manual of the product HE-117W Universal
Go to page of 8
OWNER'S MANUAL PREASSEMBLED AUTOMA TIC SECURITY FLOODLIGHTS MOTION SENSOR SECURITY LIGHTING SYSTEMS LiteAide ® HE-100B HE-100BW HE-112 HE-112W HE-117 HE-117W HE-117-2B.
OWNER'S MANUAL Also regard the following considerations: The security floodlight operates on 1 10-120 volt, 60 Hertz electrical power only . Do not connect it to any other voltage source. Locate the security floodlight at least 8 feet (2.
CAUTION Never allow sunlight to shine directly into the security floodlight sensor prior to, during or after installation. Direct sunlight could damage the sensor . 2 . Remove the preassembled security floodlight from the box. Locate shield slots and push down over four retainer pins.
Connect the security floodlight only to 1 10-120 volt, 60 Hertz electrical power . There is sufficient voltage and current to harm you if you come into contact with the 1 10-120 volt, 60 Hertz electrical power .
ADJUSTMENTS AND TESTING Four easy adjustment and testing steps put your security floodlight into operation: sensor and floodlight positioning, test, timing adjustment and sensitivity adjustment. Y ou can make these adjustments and tests in daylight. After a few days of operation, you may want to make readjustments - refer to FINAL ADJUSTMENTS.
3 . After the correct position has been established, tighten the elbow joint screw and the sensor head locknut at the end of the elbow (near the cover).
The floodlight remains on the set time between 5 seconds and 18 minutes (approximate). The manual mode permits you to turn the security floodlight on for as long a time period as you desire. Y ou end the on-time by manually turning the security floodlight off and then back on after 5 seconds (the security floodlight is now in the automatic mode).
LIMITED 5 YEAR WARRANTY Universal Security Instruments, Inc. ("Universal") warrants your Universal product to be free from defects in material and workmanship for a period of five (5) years from the date of purchase.
An important point after buying a device Universal HE-117W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Universal HE-117W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Universal HE-117W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Universal HE-117W you will learn all the available features of the product, as well as information on its operation. The information that you get Universal HE-117W will certainly help you make a decision on the purchase.
If you already are a holder of Universal HE-117W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Universal HE-117W.
However, one of the most important roles played by the user manual is to help in solving problems with Universal HE-117W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Universal HE-117W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
