Instruction/ maintenance manual of the product PRO501XL Uniden
Go to page of 10
-~ PRO501 XL Citizens Band Radio I Australian Edition I unidE!n°o OPERATING GUIDE -----. i.
-- - -_.- Introduction Welcome to the world of CB radio communication. Your Uniden PRO501XL represents the most advanced portable radio ever designed for use in the Citizens Band Radio Service. This powerful unit operates on any of the 40 AM frequencies authorized by the Spectrum Management Agency (SMA).
- ;:::;::; Operation Before operating the PRO501 XL: 1. Be sure you read and understand SMA Rules and Regulations. 2. Be sure that the power cord, microphone and antenna are properly connected. 3. Turn the power on by sliding the PWR switch to ON. Receive 1.
'== PRO501 AXL Accessories To connect the Cigarette Lighter Adapter Plug: IMPORTANT: The Cigarette Lighter Adapter Plug is designed to be used ONLY with negative ground vehicles. Do not attempt to operate the unit with the Adapter Plug connected to a positive ground vehicle.
r - --- -- Controls And Functions Front Panel 9 4 765 1. PWR Turns the unit on and off. 2. VOLUME Adjusts the volume level. 3. SQUELCH Adjusts the squelch level. 4. Channel Selector Selects any of the 40 CB channels. 5. TX Indicator LED lights to indicate when the radio is transmitting.
~ --- I1 I Installation Connecting the Power Cord WARNING This radio can be used only in vehicles with a negative ground electrical system. Connecting this unit to a positive ground electrical system will result in serious damage to the radio.
-- ~ ---.. ;;:;I: _. 4. Secure the radio to the mounting bracket with the provided mounting knobs (2). 5. To mount the radio at an angle: . Loosen the mounting knobs. . Tilt the radio. . Tighten the mounting knobs. Connecting the Microphone Plug the Microphone Cord connector into the jack on the left-hand side of the radio.
Specifications Channels: Frequency Range: Frequency Control: Frequency Tolerance: Operating Temperature: Microphone: Input Voltage: Size: Complete Package: Antenna Connector: Transm iller Power Output.
== ;0 <:::: Troubleshooting If the PRO501XL does not perform to your expectations, please try the troubleshooting suggestions listed below. Servicing Your CB If you determine that service is necessary, contact your local dealer or return the unit in its original carton to Uniden - Service Division.
=- Warranty Unlden PRO501XL CB Radio Australian 2 Year Warranty. (Accessories are covered for 90 days only). Note: Please keep your sales docket as it provides evidence of warranty.
An important point after buying a device Uniden PRO501XL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Uniden PRO501XL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Uniden PRO501XL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Uniden PRO501XL you will learn all the available features of the product, as well as information on its operation. The information that you get Uniden PRO501XL will certainly help you make a decision on the purchase.
If you already are a holder of Uniden PRO501XL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Uniden PRO501XL.
However, one of the most important roles played by the user manual is to help in solving problems with Uniden PRO501XL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Uniden PRO501XL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
