Instruction/ maintenance manual of the product FP203 Uniden
Go to page of 12
FP203.
Introduction ..............................................................................................1 Features ........................................................................................1 Included in your package ..................
Handset Speaker Hook Switch Coil Cord LCD Display NEW Call and NEW Message Indicator In Use Indicator Ringer HI/LO Switch Line Cord Battery Compartment Jack for Coil Cord Adaptor Socket Jack for Line Cord Optional AA Batteries can be used instead of the AC Adaptor .
Batteries may be used instead of the supplied AC Adaptor . 1. Remove the battery compartment cover . 2. Fit 4 x AA alkaline batteries. 3. Replace the cover and secure with screw . 4x AA Batteries Connecting Line Cords and AC Adaptor 1. Plug one end of the supplied telephone cord into the telephone line socket located at the rear of the phone.
Digit Insert 0 Caller ID T o correctly display and dial Call ID numbers, you may need to insert a digit at the beginning of your telephone number . (eg: in New Zealand, T elecom requires a '0' to be inserted.) If you subscribe to T elecom New Zealand, this code has already been set for you to '0'.
F or 'Call W aiting' to operate you must subscribe to this ser vice through your local telephone company . If you do not have this ser vice, then pressing the flash button during a call may disconnect the caller .
6 Message W aiting MSG T otal & New Calls No Calls Private Repeat Calls End of List Out of Ar ea Battery Low Indicator (New Zealand Only) MESSAGE W AITING MSG NO CALL PRIV A TE REPEA T review NO CALL will be saved as a Caller ID record. The function may not be available in all areas.
7 New Call Indicator Review Call Records Call Records Call Back feature Del button - for deleting Caller ID r ecords Individual Delete Delete All Use the or buttons to scroll through the caller list. At the end of the call record list, END OF LIST will be displayed.
AUTO M1 M6 0 9 8 SPEED DIAL NUMBERS Six speed dial numbers can be programmed into the memor y of your telephone ( - ). Each memor y location can store a maximum of 16 digits. 1. Press . The LCD shows "-->" 2. Enter phone number using the keypad (up to 16 digits).
9 Blank or faint scr een Batteries not lasting Caller ID will not work pr operly Phone will not ring No dial tone Caller ID Review immediately to prevent the light flashing for extended periods. Y our phone stores up to 99 Call records. When the list is full a new incoming call will automatically delete the oldest call record.
10 W ARRANTY Important: Evidence of original purchase is required for warranty ser vice. W arrantor: Uniden Australia Pty Limited. ABN 58001 865 498 Uniden New Zealand ELEMENT OF W ARR ANTY : Uniden w.
© 2007 Uniden Australia Pty Limited Uniden New Zealand Limited THANK YOU FOR PURCHASING A UNIDEN PHONE.
An important point after buying a device Uniden FP203 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Uniden FP203 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Uniden FP203 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Uniden FP203 you will learn all the available features of the product, as well as information on its operation. The information that you get Uniden FP203 will certainly help you make a decision on the purchase.
If you already are a holder of Uniden FP203, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Uniden FP203.
However, one of the most important roles played by the user manual is to help in solving problems with Uniden FP203. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Uniden FP203 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
