Instruction/ maintenance manual of the product DECT 6015 Uniden
Go to page of 20
i DECT 6005 A ccessor y handset for DECT 6015 and DECT 6035 Series DECT6005 OM.indd i DECT6005 OM.indd i 20/8/07 1:49:18 PM 20/8/07 1:49:18 PM.
1 Welcome Congratulations on your purchase of the Uniden DECT6005 accessory handset and charger . Y ou can place this fully featured cordless handset anywhere your home has AC power . Note: Illustrations in this manual are used for explanation purposes.
2 Compatible Bases This handset is compatible with Uniden’s 1.8GHz DECT 6015 and DECT 6035 expandable phone series. Installing the Accessory Handset Checking the Package Contents Make sure your package contains the following items. If any items are missing or damaged, contact our Customer Service Hotline.
3 Installing the Belt Clip Line up the tabs with the holes on each side of the handset. Press the belt clip down until both tabs click into place. T o remove the belt clip, pull both sides of the clip to release the tabs from the holes. Installing the Optional Headset Y our phone may be used with an optional headset.
4 Registering the Handset Y ou must register the handset to the base before you can use it. Only one handset can be registered at a time. (If an accessory handset has ever been registered to a base, you must reset the handset before you can register it to a new base.
5 Resetting the Handset Without the Base If the original base this handset was registered to is not available for some reason (for example, it is lost or somehow incapacitated), you can still reset the handset and use it with another base. Press and hold [ ] and [#] for more than fi ve seconds, until the SYSTEM RESET menu appears.
6 Using the Interface Parts of the Handset 1 2 3 5 6 7 8 9 10 11 12 15 19 20 21 16 18 17 13 4 14 22 1 2 3 5 6 7 8 9 10 11 12 15 19 20 21 16 18 17 13 4 14 22 1. Headset jack cover 2. Belt clip hole 3. Speakerphone speaker and ringer 4. Handset battery compartment 5.
7 Reading the Display The handset display uses icons to tell you the status of your phone. The table below lists the icons and what they mean. Icon Status Description Standby/ T alk The battery icon indicates the handset battery status: full, medium, low , and empty .
8 Using the Handset Menus T o open the menu, press [Menu/Select] . Highlight the option you want by pressing the four-way function key . This will move the cursor; the option currently highlighted has a triangle beside it. Activate the highlighted option by pressing [Menu/Select] .
9 For example, to enter the word "Movies": Press [6] once to enter M. Use [right] on the four-way function key to move the cursor to the right. Press [6] six times to enter o. Press [8] six times to enter v . Press [4] six times to enter i. Press [3] fi ve times to enter e.
10 Using Y our Accessory Handset Making and Receiving Calls With the earpiece With the speaker phone Make a call Pick up the handset from the cradle. Dial the number . Press [ /Flash] . 1. 2. 3. Pick up the handset from the cradle. Dial the number . Press [ ] .
11 Using Caller ID and Call W aiting If you subscribe to Caller ID, you can store up to thirty Caller ID numbers in each handset. Caller ID records are stored from newest to oldest. Once your Caller ID list is full and you receive an incoming call, the oldest record will be automatically deleted to make room for the new record.
12 Using the Phonebook Y our handset can store up to seventy names and numbers in your phonebook. When all the phonebook entries are full, you will hear a beep and MEMORY FULL appears. Y ou cannot store any additional names and numbers unless you delete some of the existing ones.
13 Redialing a Number T o redial one of the last fi ve numbers dialed on this handset, press [Redial/Pause] . This opens the redial list. Use [ ] and [ ] to fi nd the number you want to dial, and press [ /Flash] or [ ] in standby , or press [Menu/Select] during a call.
14 Using Hold, Conference, T ransfer and Intercom Put a call on hold Press [Clear/int’com] . If you leave a caller on hold for more than fi ve minutes, the call will be disconnected. T o return to the party on hold, press [ /Flash] or [ ] . Join a call already in progress T o join a call already in progress, press [ /Flash] or [ ] .
15 Accessing V oicemail If your base doesn't have an answering system and you subscribe to a voice mail service, you can program your handset to automatically dial the access number . Press [Menu/Select] . Move the cursor to HANDSET SETUP and press [Menu/Select] .
16 Screening Calls If your base has an answering system, you can listen to callers as they leave a message. Press [ /Mute] when the system is answering to listen to the caller without answering the phone.
17 Caution: This equipment contains a rechargeable Nickel-Metal-Hydride battery . Do not remove the batteries to charge them. Never throw the battery in a fi re or disassemble or heat it. Do not remove or damage the battery casing. Do not short-circuit the battery .
18 ONE YEAR LIMITED WARRANTY UNIDEN DECT 6005 CORDLESS PHONE IMPORTANT : Evidence of original purchase is required for warranty service. WARRANTOR : Uniden Australia Pty Limited A.B.N. 58 001 865 498 Uniden New Zealand Limited Warranty only available in original country of purchase.
19 © 2007 Uniden Australia Pty Limited Uniden New Zealand Limited Printed in China UUZZ01652BZ(0) DECT6005 OM.indd 19 DECT6005 OM.indd 19 20/8/07 1:49:26 PM 20/8/07 1:49:26 PM.
An important point after buying a device Uniden DECT 6015 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Uniden DECT 6015 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Uniden DECT 6015 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Uniden DECT 6015 you will learn all the available features of the product, as well as information on its operation. The information that you get Uniden DECT 6015 will certainly help you make a decision on the purchase.
If you already are a holder of Uniden DECT 6015, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Uniden DECT 6015.
However, one of the most important roles played by the user manual is to help in solving problems with Uniden DECT 6015. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Uniden DECT 6015 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center