Instruction/ maintenance manual of the product 1175 Series Ultra Start
Go to page of 8
OWNER’S GUIDE The system must be placed into Service Mode before any service work is started on the vehicle. It is the sole responsibility of the vehicle owner to ensure that this is done. The manufacturer accepts no liability or responsibility for accidental starting of the vehicle.
OWNER ’S GUIDE PAGE 2 Congratulations on your purchase of an Ultra S tart remote vehicle starter . Ultra S tart remote vehicle starters will provide years of comfort and convenience. T o utilize and understand this system to the fullest, PLEASE READ THIS MANUAL IN DET AIL.
P AGE 3 OWNER ’S GUIDE Safety The owner/user MUST INST ALL a CARBON MONOXIDE DETECTOR in the living area near to where the vehicle is being stored or parked.
OWNER ’S GUIDE PAGE 4 Re m o t e S t a r ter Functions Remote St arting (if remote start fails to st art see page 15) 1. Press and release the ST ART button.
P AGE 5 OWNER ’S GUIDE If the remote starter does not activate when the button is pressed the park lights will flash a diagnostic code to indicate what shutdown input has been triggered.
OWNER ’S GUIDE PAGE 6 System Service Mode will disable the remote starter . This will only effect the remote start portion of the system. The optional lock, unlock and trunk release features will still be operational. When the vehicle is to have any under hood or service work done, the system must be placed into Service Mode .
P AGE 7 OWNER ’S GUIDE R emote T ransmitter Lear n STEP 1 - Within 3 seconds turn the ignition key to the “ ON ” position three times leaving “ ON ” the third time. NOTE: STEP 3 (Default) - While holding the Program Button, press and release the ST ART button on each of the remote transmitters to be programmed.
OWNER ’S GUIDE PAGE 8 Limited Lifetime W ar ranty This device complies with Part 15 of the FCC rules. Operation of this device is subject to the following conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
An important point after buying a device Ultra Start 1175 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ultra Start 1175 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ultra Start 1175 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ultra Start 1175 Series you will learn all the available features of the product, as well as information on its operation. The information that you get Ultra Start 1175 Series will certainly help you make a decision on the purchase.
If you already are a holder of Ultra Start 1175 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ultra Start 1175 Series.
However, one of the most important roles played by the user manual is to help in solving problems with Ultra Start 1175 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ultra Start 1175 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
