Instruction/ maintenance manual of the product 300 Ultra electronic
Go to page of 4
www.ult ramagic ard.co m 300 & S p rinte r d y e-film installation g uide To remove the dye-film carrier turn the “Dzus” fastener ring a quarter turn counter-clockwise, the dye film carrier can then be removed. 1 Remove the roll of dye film from its w rapper and slide it over th e bottom feed core.
www.ult ramagic ard.co m 300 & S p rinte r d y e-film installation g uide It may be necessary to turn the take-up spool drive gear to ensure the two notches in the spool locate correctly with the locking pins. Manually turn the Spur Gear until the notches on the spool engage w ith the locking pins.
www.ult ramagic ard.co m 300 & S p rinte r d y e-film installation g uide Avoid touching the tip of the th ermal printhead with your hands. Feed the leading edge of the dye film over the top of the Thermal Printhead and beneath the guide bar, stick the leading edge on the dye film to the take up spool with the white label provided.
www.ult ramagic ard.co m 300 & S p rinte r d y e-film installation g uide Special Note: How to fit UR3 Continuous Resin Dye Fi lm and UR10 Sin gle Colour Dye Film Before fitting the continuous r e.
An important point after buying a device Ultra electronic 300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ultra electronic 300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ultra electronic 300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ultra electronic 300 you will learn all the available features of the product, as well as information on its operation. The information that you get Ultra electronic 300 will certainly help you make a decision on the purchase.
If you already are a holder of Ultra electronic 300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ultra electronic 300.
However, one of the most important roles played by the user manual is to help in solving problems with Ultra electronic 300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ultra electronic 300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
