Instruction/ maintenance manual of the product Turbo MS Ultra electronic
Go to page of 37
Ultra Electronics Card Systems Quick Start Guide MAGICARDTURBO Color Printer Page 1 MAGICARD TURBO Color Printer Quick Start Guide for the TURBO, TURBO M AND TURBO MS Quick Start Guide Printer/Software Setup Iss.
Quick Start Guide Ultra Ele ctronics Card Systems Page 2 MAGICARD Color Printer Setting up your MAGICARD TURBO Color Printer takes just three easy steps: 1.
Ultra Electronics Card Systems Quick Start Guide MAGICARDTURBO Color Printer Page 3 Location Requirements for your printer: • A clean, level surface. • Adequate space for: - opening the Top Cover - cable access at the rear. - allowance for air circulation.
Quick Start Guide Ultra Electronics Card Systems Page 4 MAGICARD TURBO Color Printer changes. Carefully open the box and remove any accessories. Place on a smooth, level table and remove the polyethylene container.
Ultra Electronics Card Systems Quick Start Guide MAGICARD TURBO Color Printer Page 5 The MagiCard Color Printer Take-up Core The Card Cassette A Power Cord with Moulded Plug for your Country Checking .
Quick Start Guide Ultra Electronics Card Systems Page 6 MAGICARD TURBO Color Printer Envelope containing this Quick Start Guide and the PrintMAGIC WINDOWS Driver 3.5" floppy disk. OPTIONAL STARTER KIT Note: This Starter Kit is not supplied with your printer and must be ordered separately, Part No M9004-698.
Ultra Electronics Card Systems Quick Start Guide MAGICARD TURBO Color Printer Page 7 Open the Printer Top Cover by releasing the catch on the right-hand side of the printer. By turning the “Dzus” fastener ring a quarter turn counter-clockwise, the dye film carrier can be removed.
Quick Start Guide Ultra Electronics Card Systems Page 8 MAGICARD TURBO Color Printer Manually turn the Spur Gear until the slots on the core engage with the lugs. Pull about 6" of dye film off the roll of dye film, observing that it should be coming off the top of the roll, as per the label illustrations.
Ultra Electronics Card Systems Quick Start Guide MAGICARD TURBO Color Printer Page 9 Avoid touching the tip of the thermal printhead with your hands. Feed the leading edge of the dye film over the tip of the Thermal Printhead and beneath the two guide bars, where fitted.
Quick Start Guide Ultra Electronics Card Systems Page 10 MAGICARD TURBO Color Printer Flex a stack of plastic cards, to make sure they are not 'stuck' together. Avoid touching the surfaces to be printed. Drop the cards flat down into the plastic Cassette, side to be printed uppermost, mag stripe to the left and facing down (if used).
Ultra Electronics Card Systems Quick Start Guide MAGICARD TURBO Color Printer Page 11 The 'tacky' roller should be removed for cleaning before each batch of 100 cards. To remove the ‘tacky’ roller, release the locking tab on the left-hand side and, by putting your fingers beneath it, the roller can then be removed.
Quick Start Guide Ultra Electronics Card Systems Page 12 MAGICARD TURBO Color Printer Locate the Mains Switch on the rear panel. Plug in the Power Cord. Plug the other end into a Power Supply socket. Switch ON. The indicators should all flash and the motors run briefly.
Ultra Electronics Card Systems Quick Start Guide MAGICARD TURBO Color Printer Page 13 At the rear of the printer, locate the TEST Push-button. This is located in the rear panel, just above the Centronics parallel interface connector. Press the push-button momentarily.
Quick Start Guide Ultra Electronics Card Systems Page 14 MAGICARD TURBO Color Printer Switch the printer OFF. Locate the UltraSecure Interface connector on the rear panel.
Ultra Electronics Card Systems Quick Start Guide MAGICARD TURBO Color Printer Page 15 • Start the PC and from the desktop select the My Computer folder.
Quick Start Guide Ultra Electronics Card Systems Page 16 MAGICARD TURBO Color Printer • Select the Next> button: • Select the desired port (usually LPT1 ) and select the Next> button: You may then be offered the choice of which printer to use as the default printer.
Ultra Electronics Card Systems Quick Start Guide MAGICARD TURBO Color Printer Page 17 Printer Setup procedure to be followed if the default settings differ from your requirement: Printer Setup Changes.
Quick Start Guide Ultra Electronics Card Systems Page 18 MAGICARD TURBO Color Printer Degrees rotated 180 degrees. Opposing Rotation Between Sides is only significant if interfacing to a Magicard Flip Double-Sided printing model.
Ultra Electronics Card Systems Quick Start Guide MAGICARD TURBO Color Printer Page 19 The default settings are for complete coverage to the card margins. For MAGICARD 300 it is 0,36,947,631 and for MAGICARD 300 plus and Turbo it is 0,0,985,641. The four numbers are the X and Y coordinates of the bottom left and top right corners of each area.
Quick Start Guide Ultra Electronics Card Systems Page 20 MAGICARD TURBO Color Printer position. A 1% shift is approximately 0.1mm X Start Position - This function allows the operator to adjust the position of the start of the image. A 1% shift is approximately 0.
Ultra Electronics Card Systems Quick Start Guide MAGICARD TURBO Color Printer Page 21 New York, New York 10036 Tel: (212) 642-4900 Parallel Port Configuration Non-ECP Operation If you are using Windows 3.
Quick Start Guide Ultra Electronics Card Systems Page 22 MAGICARD TURBO Color Printer Install the Windows Driver Procedure to be followed if your PC uses Windows NT 4.0: Start the PC and log in as Administrator to be sure you have the rights to install the driver.
Ultra Electronics Card Systems Quick Start Guide MAGICARD TURBO Color Printer Page 23 Select the Next button: Fill in the printer name (max. 32 characters, default Ultra card printer) and select the Next button. Now indicate whether you would like to share the printer with other network users.
Quick Start Guide Ultra Electronics Card Systems Page 24 MAGICARD TURBO Color Printer Paper Size Use Paper Size to determine the printed area of the card. Standard Size or Full Bleed (Magicard 300 plus only) can be selected. Copy Count Sets the number of copies printed of each card.
Ultra Electronics Card Systems Quick Start Guide MAGICARD TURBO Color Printer Page 25 Area If area is selected the coordinates define the start and end of the overcoat area Window If window is selecte.
Quick Start Guide Ultra Electronics Card Systems Page 26 MAGICARD TURBO Color Printer On this page color corrections can be made (a corrected image will be send to the printer). The available settings depend on the ribbon used. For the color ribbon (YMCKO Resin - UR1 in the example), blue, green and red intensity and contrast can be corrected.
Ultra Electronics Card Systems Quick Start Guide MAGICARD TURBO Color Printer Page 27 The simplest wa y to verify correct operation is to print a test image from a WINDOWS application: • Ensure that the Printer is switched ON and that the POWER ON and ON LINE indicators are lit.
Quick Start Guide Ultra Electronics Card Systems Page 28 MAGICARD TURBO Color Printer Check the Installation: • Repeat the Installation Steps in this Guide. • Check that all cables are correctly connected. • Check the Printer Setup in the WINDOWS Driver.
Ultra Electronics Card Systems Quick Start Guide MAGICARD TURBO Color Printer Page 29 Thermal Printhead Cleaning It is recommended that the Thermal Printhead be cleaned after every roll of dye film, i.
Quick Start Guide Ultra Electronics Card Systems Page 30 MAGICARD TURBO Color Printer 4. Whilst changing the dye film, and wit h the dye film removed, gently wipe the tip of the Thermal Printhead, using a gentle side-to-side action, with the Felt Tip Cleaning Pen supplied.
Ultra Electronics Card Systems Quick Start Guide MAGICARD TURBO Color Printer Page 31 1. Lift up the Top Cover to the vertical position, and remove the Cassette. Switch ON the power supply. 2. Get the motor to turn the rollers by operating the Microswitch in the front of the print engine, by hand.
Quick Start Guide Ultra Electronics Card Systems Page 32 MAGICARD TURBO Color Printer Cleaning the Optics 1. Ensure the two light emitting diodes (LED's) adjacent to the Thermal Printhead, are clean and not obscured, the felt tip cleaning pen can be used as in diagram 1.
Ultra Electronics Card Systems Quick Start Guide MAGICARD TURBO Color Printer Page 33 The MAGICARD printer has extensive error trapping facilities, to provide the operator or service agent with fault diagnosis information.
Quick Start Guide Ultra Electronics Card Systems Page 34 MAGICARD TURBO Color Printer Notice The information contained in this document is subject to change without notice.
Ultra Electronics Card Systems Quick Start Guide MAGICARD TURBO Color Printer Page 35 Limited Warranty Information 1) Coverage: Ultra Electronics Ltd Warrants that the MAGICARD printer shipped with th.
Quick Start Guide Ultra Electronics Card Systems Page 36 MAGICARD TURBO Color Printer EC Declaration of Conformity Manufacturer's Name: Ultra Electronics Limited. Manufacturer's Address: Waverley House, Hampshire Road, Granby Estate, Weymouth, Dorset DT4 9XD England.
Ultra Electronics Card Systems Quick Start Guide MAGICARD TURBO Color Printer Page 37 Date: 01 April 1999 Year 2000 Compliancy Statement Dear Sirs The equipment listed below has been tested as appropriate in accordance with Ultra Electronics Ocean Systems specification 0008/04/01 and found to be Year 2000 compliant in all respects.
An important point after buying a device Ultra electronic Turbo MS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ultra electronic Turbo MS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ultra electronic Turbo MS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ultra electronic Turbo MS you will learn all the available features of the product, as well as information on its operation. The information that you get Ultra electronic Turbo MS will certainly help you make a decision on the purchase.
If you already are a holder of Ultra electronic Turbo MS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ultra electronic Turbo MS.
However, one of the most important roles played by the user manual is to help in solving problems with Ultra electronic Turbo MS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ultra electronic Turbo MS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
