Instruction/ maintenance manual of the product 1800 Ultimate Technology
Go to page of 12
1800 Series POS Bundle 1800 POS Bundle Installation Guide Thank you for selecting UTC RETAIL’s innovative 1800 Series Point of Sale bundle solution! This guide is designed to help you efficiently a ssemble the 1800 Series POS Bundle System. © 2008 UTC RET AIL.
1800 Series POS Bundle System Inst allation Guide This guide was prepared by UTC RETAIL to assist personnel with the installation of the bundle components. All attempts have been made to ensure that the information presented in this manual is correct.
© 2008 UTC RET AIL. All rights reserved. 11692014 Rev C Page 3 of 12 Table of Contents 1800 Series POS Bundle System Installation Guide ................................................................ 2 Product Information ...........................
© 2008 UTC RET AIL. All rights reserved. 11692014 Rev C Page 4 of 12 Product Information You will find the following components inside the 1800 Series POS Bundle System Box: • Safety Sheet • 1800.
Un-boxing the System 1. Open the point of sale box and remove the contents. 2. Remove all packing materials. Inst allation 1. Orient the cash drawer on its back side on your cash wrap (counter). Remove the keys. Locate the cash drawer cable package, labeled ‘APG cash drawer 320 Multipro cable ki t’.
4. Connect the printer USB cable from the printer to a USB port on the rear of the PC. 5. Connect the power cable from the printer power supply to the connector on the printer. Connect the AC cable to the printer power supply and then to a wall outlet or the optional Power Conditioner.
7. Connect the USB connector end of the Barcode Scanner cable to a USB port on the back of the PC. Connect the other end into the jack on the barcode scanner handle.
9. Connect the optional Payment Terminal (Pin Pad or Signature Capture device) to a Serial Port on the back of the PC. For instructions on the Signature Capture device cable connect ions, refer to the install guide included with the terminal. Plug the AC power adapter i nto a wall outlet or the optional Power Conditioner.
10. Connect the optional Rear Customer Display as follows: Figure 8: Rear View of 1800 Unit 1. Remove the cover panel The 1800 Series main unit ships with a cover panel over the Customer Display attachment position. Lift the bottom edge of the cover panel, and then pull the p anel straight up to expose the connecting cable.
11. Connect the optional Inventory Scanner to a serial port on the back of the PC. Then plug the power supply into a wall outlet or the optional Power Conditioner. Figure 9: Rear View of PC, Inventory Scanner connec tion 12. Connect a site provided network cable into the network jack on the back of the PC.
13. Plug the PC power cord into the receptacle on the rear of the PC and then into the wall outlet or optional Power Conditioner. Figure 11: Rear View of PC, Power cord connection Powering On Y our 1800 Series POS Bundle System 1. Remove the plastic protective sheets from the LCD Monitor and the optional rear customer displ ay.
© 2008 UTC RET AIL. All rights reserved. 11692014 Rev C Page 12 of 12 T roubleshooting Procedures The following table presents symptoms and solutions for problems potentially encountered when installing the 1800 Series Bundled POS System components.
An important point after buying a device Ultimate Technology 1800 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ultimate Technology 1800 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ultimate Technology 1800 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ultimate Technology 1800 you will learn all the available features of the product, as well as information on its operation. The information that you get Ultimate Technology 1800 will certainly help you make a decision on the purchase.
If you already are a holder of Ultimate Technology 1800, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ultimate Technology 1800.
However, one of the most important roles played by the user manual is to help in solving problems with Ultimate Technology 1800. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ultimate Technology 1800 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
