Instruction/ maintenance manual of the product 203779GS Troy-Bilt
Go to page of 44
0 ii / '_" m ® 3 BRIGGS & STRATTON POWER PRODUCTS GROUP, LLC JEFFERSON, WiSCONSiN, U.S.A. Manual No 203779GS Revtston A (08,'13,'20071 0 4.
Thank you for purchasing this quality-built Troy-Bilt pressure washer. We are pleased that you've placed your confidence in the Troy-Bilt brand. When operated and maintained according to the instructions in this manual, your Troy-Bilt pressure washer will provide many years of dependable service.
Table of Contents Operator Safety ................................. 4 Equipment Description......................................... 4 Safety Rules ................................................. 4 Assembly ..................................... 8 Unpack Pressure Washer .
a_ Operator Safety Equipment Description _Read this manual carefully and become familiar ....... with your pressurewasher. Know its applications, its limitations, and any hazardsinvolved. This pressure washer operates at a max of 2,500 PSI and a flow rate of up to 2.
WARNING iRunning engine givesoff carbon monoxide, an lodorless, colorless, poisongas. iBreathing carbon monoxide can cause headache, _ fatigue, dizziness, vomiting, confusion, seizures, Inausea, fainting or death. Some chemicals or detergents may be harmful if inhaled or ingested, causing severe nausea, ifainting, or poisoning.
a_ WARNING Starter cord kickback (rapid retraction) can result fin bodily injury. Kickback will pull hand and arm ,_ ioward engine faster than you can let go. Broken bones, fractures, bruises, or sprains ;ould result. • NEVER pull starter cord without first relieving spray gun pressure.
WARNING Starter and other rotating parts can entangle hands, hair, clothing, or accessories• . NEVER operate pressure washer without protective housing or covers. . DO NOT wear loose clothing, jewelry or anything that may be caught in the starter or other rotating parts• .
E Assembly _Read entire operator's manual before you attempt to assemble or operate your new pressurewasher. Your pressure washer requires some assembly and is ready for use after it has been properly serviced with the recommended oil and fuel.
Add En{jine Oil and Fuel • Place pressure washer on a level surface• NOTE: Verify provided oil bottle is the correct viscosity for current ambient temperature• • Refer to engine operator'.
Features and Controls _Read this Operator's Manual and safety rules before operating your pressure washer. Compare the illustrations with your pressure washer, to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference.
Operation If you have any problems operating your pressure washer, please call the pressure washer helpline at (888) 611-6708. Pressure Washer Location Clearances and Air Movement WARNING ff_j_ Exhaust heat/gases can ignite combustibles, structures or damage fuel tank causing a fire.
Howto Start Your Pressure Washer To start your pressure washer for the first time, follow these instructions step-by-step. This starting information also applies if you have let the pressure washer sit idle for at least a day. 1. Place pressure washer near an outside water source capable of supplying water at a flow rate greater than 3.
WARNING The high pressure stream of water that this equipment produces can cut through skin and its _ nderlying tissues, leading to serious injury and possible amputation. Spray gun traps high water pressure, even when engine is stopped and water is disconnected, which can cause injury.
8# 8# 8# 2. Place spray gun through hole on accessory tray on right side of unit. NOTE: You may also use the spray gun holder wireform attached to the handle to store your spray gun and nozzle extension, as shown in Features and Controls section. 3. Insert multi-colored spray tips in spaces provided in accessory tray.
5. Make sure garden hose is connected to water inlet. Check that high pressure hose is connected to spray gun and pump. Turn on water. NOTICE You must attach all hoses before you start the engine. Starting the engine without all the hoses connected andwithout the waterturned ON will damage the pump.
f_ f_ o= Maintenance General Recommendations Regular maintenance will improve the performance and extend the life of the pressure washer. Seeany qualified dealer for service. The pressure washer's warranty does not cover items that have been subjected to operator abuse or negligence.
Check Spay Gun and Nozzle Extension Examinethe hose connection to the spray gun and make sure it is secure. Test the trigger by pressing it and making sure it "springs back" into place when you release it. Put the trigger lock in the ON position and test the trigger.
f_ Engine Maintenance See the engine operator's manual for instructions on how to properly maintain the engine. CAUTION Avoid prolonged or repeated skin contact with used motor oil. Used motor oil has been shown to cause skin cancer in certain laboratory animals.
Winter Storage NOTICE You must protect your unit from freezing temperatures. Failure to do so will permanently damage your pump and render your unit inoperable. Freeze damage is not covered under warranty. To protect the unit from freezing temperatures: 1.
Troubleshooting Problem Cause 1. Low pressure spray tip installed. , 3. Pump has following problems: failure 4. to produce pressure, erratic pressure, 5. chattering, loss of pressure, low water 6. volume. 7. 8. 9. 10. 1. 2. Detergent fails to mix with spray.
Effective December 1, 2006 replaces all undated Warranties and all Warranties dated before December 1,2006 LIMITED WARRANTY Troy-Bilt® is a registered trademark of MTD Products Inc.
0 PrssSIJr8 81' V® Product Specifications Max Outbt Pressure ............ 2,500 PSi (172.3 BARS) Max Flow Rate ................ 2.3 GPM (8.7 liters/min) Water Supply Temperature ........... I O0°F(38°0) MAX Shipping Weight ....................
I® Limpiadora a Presi6n e BRIGGS & STRATTON POWER PRODUCTS GROUP, LLC JEFFERSON, WiSCONSiN, U.S.A..
Gracias per comprar esta limpiadora a presi6n de calidad Troy-Bilt. Nos complace que haya depositado su confianza en la marca Troy-Bilt. Si se utiliza y mantiene de acuerdo con las instrucciones de este manual, su limpiadora a presi6n Troy-Bilt le proporcionarA muchos a_os de funcionamiento fiable.
Tabla de Contenido Seguridad de 0perario ............................ 4 Derscripci6n del Equipo........................................ 4 Reglas de seguridad .......................................... 4 lVlontaje ......................................
t_ Seguridad de Operario Derscdpcidn del Equipo Lea este manual de manera cuidadosa y familiaricese con su limpiadora a presibn. Conozca sus uses, sus limitaciones y cualquier peligro relacionado con el mismo. Este manual contiene informacidn sobre una limpiadora a presi6n que funciona a 2.
ADVERTENCIA AI motor funcionar, se produce mon6xido de carbono, un gas inodoro y venenoso. Respirar mon6xido de carbono puede provocar dolor de cabeza, fatiga, mareos, v6mitos, confusi6n, ataques, nAuseas, desmayos o incluso la muerte.
t_ ADVERTENCIA El retroceso (repliegue rApido) del cable del arrancador puede producir lesiones. El retroceso impedir_ que el usuario suelte el cable a tiempo y _ irarA de su mano y brazo hacia el motor. Como resultado, podrian producirse fracturas, contusiones o esguinces.
ADVERTENCIA _o l arrancador y otras piezas que rotan pueden enredar las manos, el pelo, la ropa, o los ,_ accesorios. • NUNCA utilice la limpiadora a presi6n sin sus carcasas o tapas de protecci6n. • NO use ropa suelta, joyas o elementos que puedan quedar atrapados en el arranque o en otras partes rotatorias.
iViofltaje _Lea tetalmente el manual del eperario antes que intente ensambiar u eperar su limpiadera a presi6n. Su limpiadora a presi6n requiere de ciertos procedimientos de montaje y solo estarA listo para ser utilizado despu6s de haberle suministrado servicio con el combustible y aceite recomendados.
Agregar aceite y combustible al motor • Coloque la limpiadora a presi6n en una superficie plana y nivelada. NOTA: Compruebe que la botella de aceite suministrada tiene la viscosidad adecuada para la temperatura ambiente actual. • Consulte el manual del operario del motor para a_adir al motor el aceite y el combustible recomendado.
Caracteristicas y rnafldos _] ea el Manual del Operatic y las reglas de seguridad antes de porter en marcha su m_quina limpiadera a presi6n. Compare las ilustraciones con su m&quina limpiadora a presi6n para familiarizarse con las ubicaciones de los diferentes controles y ajustes.
Operando Si tiene problemas operando su mfiquina limpiadora a presi6n, per favor Name a la linea de ayuda para mfiquinas limpiadora a presi6n al (888) 611-6708.
m C6mo dale arranquea su rn quina lirnpiadora a presi6n Paradarle arranquea su m_quina limpiadora a presi6n movida a motor por primera vez, siga estas instrucciones paso a paso.
ADVERTENCIA El chorro de agua a alta presi6n que este equipo produce, puede atravesar la piel y los tejidos subcut_neos, provocando lesiones de gravedad que podrian dar lugar a la amputaci6n de un miembro. La pistola rociadora contiene aguaa alta presi6n incluso con el motor paradoy el agua desconectada, que puedecausar la herida.
m 2. Coloque la pistola rociadora en el orificio situado a la derecha de la bandeja de accesorios. NOTA: Tambi6n puede usar el gancho de alambre de soporte de la pistola montado en el asa para guardar la pistola y el prolongador regulable de la boquilla, come se muestra en la secci6n Caracterfsticasy mandos.
5. Aseg[irese de que la manguera del jardin estfi conectada a la entrada de agua. Compruebe que la manguera de alta presi6n estfi conectada a la pistola rociadora y a la bomba. Abra la alimentaci6n de agua. ArISe Usted deberfi conectar todas las mangueras antes de darle arranque al motor.
E iVlantenirniento Recemenda¢ienes generales El mantenimiento peri6dico mejorar_ el rendimiento y prolongar_ la vida [itil del limpiadora a presi6n. Si necesita asistencia, consulte con un distribuidor de Briggs & Stratton o con otro distribuidor cualificado.
Revise la pistela y la extensi6n para bequillas Examinela conexi6n de la manguera a la pistola y cerciorese de que est6 en buen estado. Pruebe el gatillo oprimi6ndolo y asegurfindose de que se devuelve a su sitio cuando Io suelte. Coloque el cerrojo de seguridad y pruebe el gatillo.
E lVlantenimiento del motor Consulte el manual del operario del motor para las instrucciones de c6mo mantener adecuadamente el motor. AViSO Evite el contacto prolongado o repetido de piel con aceite usado de motor. El aceite usado del motor ha sido mostrado al cancer de la piel de la causa en ciertos animales del laboratorio.
AIrnacenarniento para invierno AVISO Usted deberfi proteger su unidad de las temperaturas de congelamiento. Si no Io hace, da_arfi permanentemente la bomba y la unidad no pedrO, funcionar. La garantia no cubre el da_ode la unidad ocasionado per congelamiento.
E o Resoiuci6n de probiernas Problema La bomba presenta los siguientes probJemas: no produce presi6n o produce una presi6n errada, traqueteo, p_rdida de presi6n, hajo volumen de agua. El detergente no se mezcla con el rociado. El motor funciena hien cuando no tiene cargas, pore funciona "maJ" cuaudo se couecta uua carga.
Fecha de entrada en vigor:l de diciembre de 2006. Sustituye a todas las garantias sin fecha y a las de fecha anterior al 1 diciembre de 2006 GARANTfA LIMITADA Troy-Bilt® es una marca registrada de MTD Products Inc. bajo licencia de Briggs & Stratton Power Products.
I® Limp ora a Presi6n Especificaciones del producto Presi6n de salida m_xima ....... 172,3 BARS (2,500 PSI) Caudal m_ximo ............... 8,7 liters/rain (2,3 GPM) Temperatura del suministro de agua .......................... 38°C (100%) MAX Peso que Embarca .
An important point after buying a device Troy-Bilt 203779GS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Troy-Bilt 203779GS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Troy-Bilt 203779GS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Troy-Bilt 203779GS you will learn all the available features of the product, as well as information on its operation. The information that you get Troy-Bilt 203779GS will certainly help you make a decision on the purchase.
If you already are a holder of Troy-Bilt 203779GS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Troy-Bilt 203779GS.
However, one of the most important roles played by the user manual is to help in solving problems with Troy-Bilt 203779GS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Troy-Bilt 203779GS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
