Instruction/ maintenance manual of the product SmartPro SmartPro Rackmount Tripp Lite
Go to page of 20
1 Copyright © 1999 Tripp Lite. All rights reserved. SmartPro ® is a registered trademark of Tripp Lite. 1111 W. 35th Street Chicago, IL 60609 USA Customer Support: (773) 869-1234 www.tripplite.com Owner's Manual Smar tPr o ® Rac kmount Rac kmount Intellig ent Netw ork UPS Systems (120V) ESP AÑOL: p.
2 This manual contains important instructions and warnings that should be followed during the installation, operation and storage of all Tripp Lite UPS Systems. UPS Location W arnings • Install your UPS indoors, away from excess moisture or heat, dust or direct sunlight.
3 Install rac k handles (supplied) and mount UPS in standar d 19 in. rac k using standar d rac k hardware (user supplied). Install your UPS in the lowest rack position possible.
4 Switches System Enable Switch* This switch activates the battery charger and intelligent microprocessor. Always leave it in the “ENABLE” position when your UPS is plugged in. Set the switch to “DISABLE” only if you store or ship your UPS (to reduce battery drain).
5 On/Standby Switch This momentary switch controls power to the UPS receptacles. Engage it momentarily and release it to toggle between the “ON” mode (power ON at the UPS receptacles) and “Standby” mode (power OFF at the UPS receptacles).
6 This multi-colored light displays 4 separate UPS load conditions. It will turn from green (low) to yellow (medium) to red (high) as you connect equipment to show you the load level your UPS is supporting. When the light is red your UPS is supporting a load above 85% of its capacity.
7 Battery Replacement Door Under normal conditions, the original batteries in your UPS will last several years. Battery replacement should only be performed by qualified service personnel. Refer to “Battery Warnings” in the Safety section on page 2.
8 Este manual de operación contiene instrucciones y advertencias importantes que deben seguirse durante la instalación, operación y almacenamiento de los sistemas UPS Tripp Lite. Ad ver tencias Sobre la Ubicación del Sistema UPS • Instale este sistema UPS bajo techo, en un lugar sin humedad o calor excesivo y sin polvo o luz solar directa.
9 Instalación Instrucciones P ara la Conexión Opcional del Puerto DB9 en la Próxima Página... Instale las asas para rack (pr o veídas) e instale el sistema UPS en un rac k estándar de 19 pulgadas usando el material apropiado (proveído por el usuario).
10 Conexión del Puerto DB9 —Opcional—* Usando el cable suministrado por Tripp Lite, conecte el puerto DB9 de su servidor principal de archivos al puerto DB9 rotulado “SMART” (Inteligente), el cual provee comunicaciones completas e inteligentes tipo RS-232.
11 Interruptores Interruptor “System Enable” (Habilitador del Sistema)* Este interruptor activa el cargador de baterías y el microprocesador inteligente. Siempre debe estar en la posición “ENABLE” (Habilitar) mientras el sistema UPS esté conectado a la línea de CA.
12 Si esta luz está constantemente iluminada, significa que su sistema UPS está operando con energía de CA y cargando la batería. Si esta luz parpadea, significa que su sistema UPS está operando con energía de batería y ésta se está desgastando.
13 Puertos “BASIC” (Básicos) Estos puertos básicos conectan el sistema UPS a cualquier estación de trabajo o servidor de archivos. Utilícelos conjuntamente con el software y cable No. 73-0844 de Tripp Lite para salvar automáticamente sus archivos activos y cerrar el sistema durante un apagón.
14 Específicaciones Técnicas SMART 700 RM SMART 1050 RM Capacidad de Salida (VA/Watts): 700/450 1050/705 Tiempo de Respaldo (Media Carga/ Plena Carga) Minutos: 28/12 23/8 Tiempo de Recarga de la Batería: 2-4 hrs.
15 Ce manuel contient des instructions et des avertissements importantes pour l’installation, l’opération et l’emmagasinage de tout système d’onduleur Tripp Lite.
16 Installation Installez les poignées de mon- tage (fournies) et montez l’UPS aux normes standard de 19 pouces à l’aide du matériel de montage standard (fourni par l’utilisateur).
17 Connexion du P or t DB9 –Facultatif*– Utilisant le cablâge Tripp Lite, branchez le port DB9 de votre serveur de base au port unique DB9 «SMART» (qui fournit les communica- tions RS-232 intelligentes complètes).
18 Commutateurs Commutateur de «System Enable» («Système Valide») Ce commutateur lance le chargeur de batterie et le microprocesseur intelligent. Laissez-le toujours sur la position «ENABLE» (la position de «Validation») quand votre UPS est branché.
19 A utres Caractéristiques du Système d’Onduleur Prises CA Les prises fournissent votre équipement connecté d’alimentation de ligne c.a. pendant l’opération normale; elles fournissent votre équipement connecté d’alimentation par batterie pendant les coupures de courant et les baisses de tension.
20 SMART 700 RM SMART 1050 RM Tension de Sortie (VA/Watts): 700/450 1050/705 Temps Secours par Batterie (Pleine Charge/Mi-Charge), Min.: 28/12 23/8 Temps de Recharge de la Batterie: 2 à 4 heures 2 à.
An important point after buying a device Tripp Lite SmartPro SmartPro Rackmount (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tripp Lite SmartPro SmartPro Rackmount yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tripp Lite SmartPro SmartPro Rackmount - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tripp Lite SmartPro SmartPro Rackmount you will learn all the available features of the product, as well as information on its operation. The information that you get Tripp Lite SmartPro SmartPro Rackmount will certainly help you make a decision on the purchase.
If you already are a holder of Tripp Lite SmartPro SmartPro Rackmount, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tripp Lite SmartPro SmartPro Rackmount.
However, one of the most important roles played by the user manual is to help in solving problems with Tripp Lite SmartPro SmartPro Rackmount. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tripp Lite SmartPro SmartPro Rackmount along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
