Instruction/ maintenance manual of the product SmartPro RMX RMX 1000-2000 VA Tripp Lite
Go to page of 12
CU S U L 1778 Owner’ s Man ual 1111 W. 35th Street Chicago, IL 60609 USA Customer Support: (773) 869-1234 • www .tripplite.com Impor tant Safety Instructions 2 Mounting 3 Connection 5 Basic Operation 7 Storage and Service 10 Copyright © 2002 T ripp Lite.
2 UPS Location W arnings • Use caution when lifting UPS. Because of the considerable weight of all 3U Rackmount UPS systems, at least two people should assist in lifting and installing them. • Install your UPS indoors, away from e xcess moisture or heat, conductiv e contaminants, dust or direct sunlight.
3 Y our UPS may be rackmounted in 4- or 2-post racks using these suggested mounting procedures. These procedures are for common rack types and may not be appropriate for all rack configurations. User must determine the fitness of rackmount hardw are and procedures before mounting.
4 Mounting continued Suggested 2-P ost Rackmount Installation for the SM2000RMX Attach mounting ears (D) to the front mounting holes of your UPS (E) using the screws pro vided (F). Do not attach the mounting e a r s t o y o u r equipment’ s middle holes.
5 Plug your UPS’ s line cord into an electrical outlet. Y our UPS must be connected directly to a 3- wire grounded AC receptacle. Do not use extension cords with your UPS. Once your UPS is plugged in, the UPS will enter ST ANDBY mode. The fan will acti vate and the “ ” LED will begin flashing.
6 Connection optional Y our UPS will function properly without these connections. DB9 P or t Connection Using the DB9 cable provided, connect a DB9 port on your computer to a DB9 port on your UPS. Install the T ripp Lite power protection software appropriate to its operating system.
7 Use the PO WER button to switch your UPS between its four modes of operation. OFF: No indicator lights are on. The UPS is completely shut do wn for storage or shipping.
8 Basic Operation continued Indicator Lights (Front P anel) PO WER: Lights green when the UPS is receiving A C power . Illuminates constantly when the UPS is in the ON mode, indicating that batteries are charging and connected equipment is recei ving filtered A C power .
Basic Operation continued Other UPS Features (Rear P anel) Ground Scr ew (Select Models Only): Use this to connect any equip- ment that requires a chassis ground. Smart DB9 Ports: Y our UPS has one or two DB9 ports that may be used to connect the UPS to a DB9 port on any workstation or server .
Storage & Service Before storing your UPS, disconnect all equipment to av oid battery drain, then place the UPS in the OFF mode by putting it in ST ANDBY mode, then unplugging it (see Basic Operation, page 7).
11 200208099 93-2040 SM1000RMX Owner’s Manual.qxd 9/12/2002 3:53 PM Page 11.
93-2040 (200208099) 200208099 93-2040 SM1000RMX Owner’s Manual.qxd 9/12/2002 3:53 PM Page 12.
An important point after buying a device Tripp Lite SmartPro RMX RMX 1000-2000 VA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tripp Lite SmartPro RMX RMX 1000-2000 VA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tripp Lite SmartPro RMX RMX 1000-2000 VA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tripp Lite SmartPro RMX RMX 1000-2000 VA you will learn all the available features of the product, as well as information on its operation. The information that you get Tripp Lite SmartPro RMX RMX 1000-2000 VA will certainly help you make a decision on the purchase.
If you already are a holder of Tripp Lite SmartPro RMX RMX 1000-2000 VA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tripp Lite SmartPro RMX RMX 1000-2000 VA.
However, one of the most important roles played by the user manual is to help in solving problems with Tripp Lite SmartPro RMX RMX 1000-2000 VA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tripp Lite SmartPro RMX RMX 1000-2000 VA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
