Instruction/ maintenance manual of the product PowerVerter 200502023 Tripp Lite
Go to page of 14
Owner’ s Man ual Quiet Mobile P o wer Congratulations! Y ou've purchased the most advanced, feature-rich Inverter/Charger designed for recreational applications.
Inverter/Charger DC V olt: 12 Wire Gauge T win 00 (2/0) W atts 6 4 2 0 00 (2/0) (RV2012OEM, RV2512OEM & R V3012OEM only) 500 15 ft 25 ft 39 ft 62 ft 79 ft 158 ft. 700 1 1 ft 18 ft 28 ft 44 ft 56 ft 1 12 ft. 1000 N/R 12 ft 20 ft 31 ft 39 ft 78 ft. 2000 N/R N/R N/R 16 ft 20 ft 40 ft.
3R Impor tant Safety Instructions SA VE THESE INSTR UCTIONS! This manual contains important instructions and warnings that should be followed during the installation, operation and storage of all T ripp Lite Inverter/Chargers.
4R Feature Identification Identify the premium features on your specific model and quickly locate instructions on how to maximize their use. Configuration DIP Switches: optimize Inverter/Charger operation depending on your application. See Configuration section for setting instructions.
5R Operation Switch Modes After configuring, mounting and connecting your Inverter/Charger , you are able to operate it by switching between the following oper- ating modes as appropriate to your situation: AUTO/REMOTE: Switch to this mode when you need constant, uninterrupted AC power for connected appliances and equipment.
6R Select Battery T ype—REQUIRED (All models) CAUTION: The Battery T ype DIP Switch setting must match the type of batteries you connect, or your batteries may be degraded or damaged over an extended period of time. See “Battery Selection,” p. 10 for mor e information.
7R Select Battery Charger -Limiting Points—OPTIONAL (Not on 612 Models) “Most Limiting” (#B2 & #B1 Up): Charger -limiting takes effect the moment any 120V AC load is applied; charger out- put falls gradually from full output at no 120V load passing through to no output at full load.
8R Set Battery Charging Amps—OPTIONAL (function included on switch on 612 models) Check specifications for your unit’ s high- and low-charging amp options. By setting on high charging, your batteries will char ge at maximum speed and your R V 12V DC system loads will be well-supplied.
9R Battery Selection 540 watts ÷ 12V = 45 DC Amps 270 Amp-Hours ÷ 55 Amps In verter/Charger Rating = 5 Hours Rechar ge Select A uxiliary Battery T ype (if any) Select “Deep Cycle” batteries to receive optimum performance from your Inverter/Charger .
10R Mounting W ARNING! Mount y our In verter/Charger BEFORE DC battery and A C power connection. Failure to f ollow these instructions ma y lead to per sonal injury and/or damage to the In ver ter/Charger and connected systems.
11R • Connect DC W iring: Though your Inverter/Charger is a high-efficiency con- verter of electricity , its rated output capacity is limited by the length and gauge of the cabling run- ni ng from the bat- tery to the unit.
12R T o avoid overloading your Inverter/Charger , match the power requirements of the equipment you plan to run at any one time (add thei r total watts) with the output wattage capacity of your Inverter/Charger model (see Specifications). Do not confuse “continuous” wattag e with “peak” wattage ratings.
13R Service Before returning your Inverter/Charger for service, follow these steps: 1.) Review the installation and operation instructions to ensure that the service problem does not originate from a misreading of the instructions. Also, check that the circuit breaker(s) are not t ripped.
1111 W . 35th Street, Chicago, IL 60609 USA 773.869.1234 (USA) • 773.869.1212 (International) www .tripplite.com.
An important point after buying a device Tripp Lite PowerVerter 200502023 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tripp Lite PowerVerter 200502023 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tripp Lite PowerVerter 200502023 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tripp Lite PowerVerter 200502023 you will learn all the available features of the product, as well as information on its operation. The information that you get Tripp Lite PowerVerter 200502023 will certainly help you make a decision on the purchase.
If you already are a holder of Tripp Lite PowerVerter 200502023, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tripp Lite PowerVerter 200502023.
However, one of the most important roles played by the user manual is to help in solving problems with Tripp Lite PowerVerter 200502023. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tripp Lite PowerVerter 200502023 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
