Instruction/ maintenance manual of the product OmniSmart RMX 500 VA OM500RMX Tripp Lite
Go to page of 8
Owner’ s Man ual 1111 W. 35th Street Chicago, IL 60609 USA Customer Support: (773) 869-1234 • www .tripplite.com Impor tant Safety Instructions 2 Mounting 3 Connection 4 Basic Operation 5 Storage and Service 8 Copyright © 2003 T ripp Lite. All rights reserved.
2 UPS Location W arnings • Install your UPS indoors, a way from excess moisture or heat, conducti ve contaminants, dust or direct sunlight. • F or best performance, keep the indoor temperature between between 32º F and 104º F (0º C and 40º C).
3 Y our UPS may be rackmounted in 4- or 2-post racks or on a DIN rail using these suggested mounting procedures. The procedures are for common rack/rail types and may not be appropriate for all con- figurations. User must determine the f itness of hardware and procedures before mounting.
4 Connection 1 1 Har dwire the UPS’ s input to utility power and its output to its load. Consult a qualified electrician and follo w all applicable electrical codes and requirements.
5 Use the PO WER b utton to switch your UPS between its four modes of operation. OFF: No indicator lights are on. The UPS is completely shut do wn for storage or shipping.
6 Indicator Lights Use the MUTE/TEST button to do tw o things: SILENCE ALARM: Y our UPS has three alarms. The f irst, the INVER T alarm, emits four short beeps every ten seconds when the UPS is in INVER T mode, to warn you that A C power has failed.
7 Basic Operation continued A C Po wer T erminals: These six terminals recei ve the UPS’ s A C input and distribute the UPS’ s A C output. See Connection (page 4) for an explanation of ho w the terminals should be wired. Smart DB9 Port: Y our UPS has a DB9 port that may be used to c on- nect the UPS to a DB9 port on any w orkstation or server .
8 Storage & Service Before storing your UPS, disconnect all equipment to av oid battery drain, then place the UPS in the OFF mode by putting it in ST ANDBY mode , then disconnecting it from utility powe r (see Basic Operation). Press the PO WER button.
An important point after buying a device Tripp Lite OmniSmart RMX 500 VA OM500RMX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tripp Lite OmniSmart RMX 500 VA OM500RMX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tripp Lite OmniSmart RMX 500 VA OM500RMX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tripp Lite OmniSmart RMX 500 VA OM500RMX you will learn all the available features of the product, as well as information on its operation. The information that you get Tripp Lite OmniSmart RMX 500 VA OM500RMX will certainly help you make a decision on the purchase.
If you already are a holder of Tripp Lite OmniSmart RMX 500 VA OM500RMX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tripp Lite OmniSmart RMX 500 VA OM500RMX.
However, one of the most important roles played by the user manual is to help in solving problems with Tripp Lite OmniSmart RMX 500 VA OM500RMX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tripp Lite OmniSmart RMX 500 VA OM500RMX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
