Instruction/ maintenance manual of the product OmniPro500 Tripp Lite
Go to page of 12
1 Copyright ©2000 Tripp Lite. All rights reserved. OmniPro ™ is a trademark of Tripp Lite. 1111 W. 35th Street Chicago, IL 60609 USA Customer Support: (773) 869-1234 www.tripplite.com Owner's Manual OMNIPR O ™ 500 Line-Interactive UPS System (120V) ESP AÑOL: p.
2 This manual contains important instructions and warnings that should be followed during the installation, operation and storage of all Tripp Lite UPS Systems. UPS Location W arnings • Install your UPS indoors, away from excess moisture or heat, dust or direct sunlight.
3 Quick Installation Plug your UPS into an electrical outlet. Plug essential equip- ment such as your computer , monitor and modem into battery- supported outlets. Plug other equipment into surge-only outlets.* *Separate battery-supported/surge and surge- only outlets are identified on the back of your UPS.
4 Basic Operation OFF ON Switches With your UPS plugged in, set this switch according to the recommendations in Step 3 of the Quick Installation section. "ON" Position Function: ENABLES battery backup. UPS Conditions: The UPS battery is charging.
5 Indicator Lights All Indicator Light descriptions apply when the UPS is plugged into a wall outlet and turned on. This green light will turn ON whenever your UPS is plugged in and receiving normal AC line power. This red light will turn ON when your UPS is providing your equipment with battery power.
6 Specifications OmniPro 500 Output Capacity (VA/Watts): 500/300 Battery Runtime (Half Load/Full Load) Minutes: 17/5 Typical Runtime (Desktop PC/15 in.
7 1111 W. 35th Street Chicago, IL 60609 USA Servicios a Clientes (US) : (773) 869-1234 www.tripplite.com Copyright ©2000. Propiedad literaria de Tripp Lite. Reservados todos los derechos. OmniPro es una marca registrada de Tripp Lite. Manual de Operación OMNIPR O ™ 500 No-break / Sistema UPS Interactivo (120V) Instalación Rápida: p.
8 Este manual de operación contiene instrucciones y advertencias importantes que deben seguirse durante la instalación, operación y almacenamiento del sistema UPS Tripp Lite. Advertencias Sobre la Ubicación del Sistema UPS • Instale este sistema UPS bajo techo, en un lugar sin humedad o calor excesivo y sin polvo o luz solar directa.
9 Conecte el sistema UPS a una toma de corriente. Conecte su computadora, monitor y módem externo a los receptáculos con energía de respaldo. Conecte otros equipos a los receptáculos del sistema UPS con supresor de picos solamente.
10 Operación Básica OFF ON Interruptores Con el no-break / sistema UPS conectado a una toma eléctrica, coloque este interruptor en la posición deseada de acuerdo con las recomendaciones especificadas en el Paso 3 de la sección “Instalación Rápida”.
11 Luces Indicadoras Todas las descripciones de la Luces Indicadoras son efectivas mientras el Sistema UPS está conectado a una línea viva de CA y haya sido encendido (ON). Esta luz verde se iluminará mientras el sistema UPS esté conectado y recibiendo energía normal de CA.
12 Específicaciones Técnicas Almacenamiento Primero apague el sistema UPS y desconecte su cable de la línea de CA. Después desconecte todos sus equipos para evitar el desgaste de la batería.
An important point after buying a device Tripp Lite OmniPro500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tripp Lite OmniPro500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tripp Lite OmniPro500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tripp Lite OmniPro500 you will learn all the available features of the product, as well as information on its operation. The information that you get Tripp Lite OmniPro500 will certainly help you make a decision on the purchase.
If you already are a holder of Tripp Lite OmniPro500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tripp Lite OmniPro500.
However, one of the most important roles played by the user manual is to help in solving problems with Tripp Lite OmniPro500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tripp Lite OmniPro500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
