Instruction/ maintenance manual of the product VMX100 Behringer
Go to page of 11
www.behringer.com Version 1.0 July 2001.
2 PRO MIXER VMX100 This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Read the manual.
3 PRO MIXER VMX100 FOREWORD Dear Customer, Welcome to the team of PRO MIXER users and thank you for demonstrating your faith in us by purchasing the BEHRINGER VMX100.
4 PRO MIXER VMX100 VMX100 PRO MIXER Professional 2-channel ultra low-noise DJ mixer s Intelligent dual auto-BPM counter with time and beat sync display s Super-smooth Ultraglide faders with up to 500,.
5 PRO MIXER VMX100 TABLE OF CONTENTS 1 . INTRODUCTION ..................................................................................................................... 5 1. 1 Before you get started .................................................
6 PRO MIXER VMX100 2. FRONT PANEL 2 . FRONT PANEL.
7 PRO MIXER VMX100 2. FRONT PANEL + Never connect line-level equipment to the highly sensitive phono inputs! The output levels of phono cartridge systems are in the millivolt range, whereas CD and MD players, as well as tape decks, provide outputs levels in the volt range.
8 PRO MIXER VMX100 3. REAR PANEL synchronization of channel 1 and 2 is shown in the TIME OFFSET LED display ( ) below the TEMPO DIFFERENCE display. When the center LED is lit, the tracks are in sync with each other. When the display moves to the left or right, the corresponding channel is running out of sync.
9 PRO MIXER VMX100 3. REAR PANEL 22 The GND connection allows grounding of a turntable. 23 Use the AMP output to connect the VMX100 to an amplifier. The level is controlled by the MAIN knob in the MIC/MAIN section. + In order to avoid power-up thumps, which can damage your loudspeakers, please power up your amplifier last.
10 PRO MIXER VMX100 4. SPECIFICATIONS 4. SPECIFICA TIONS AUDIO INPUTS Mic input 53 dB gain, servo-balanced Phono inputs 1 and 2 40 dB gain @ 1 kHz, unbalanced Line inputs 1 and 2 0 dB gain, unbalanced AUDIO OUTPUTS Main Out max.
11 PRO MIXER VMX100 5. WARRANTY The information contained in this manual is subject to change without notice. No part of this manual may be reproduced or transmitted in any form or by any means, elect.
An important point after buying a device Behringer VMX100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Behringer VMX100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Behringer VMX100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Behringer VMX100 you will learn all the available features of the product, as well as information on its operation. The information that you get Behringer VMX100 will certainly help you make a decision on the purchase.
If you already are a holder of Behringer VMX100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Behringer VMX100.
However, one of the most important roles played by the user manual is to help in solving problems with Behringer VMX100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Behringer VMX100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
