Instruction/ maintenance manual of the product Audio/Video Pure Sine Wave UPS System Tripp Lite
Go to page of 13
Owner’ s Man ual 1111 W. 35th Street Chicago, IL 60609 USA Customer Support: (773) 869-1234 • www .tripplite.com Impor tant Safety Instructions 2 Installation 3 Basic Operation 6 Battery Replaceme.
UPS Location W arnings • Install your UPS indoors, away from excess moisture or heat, conductive contaminants, dust or direct sunlight. • For best performance, keep the indoor temperature between 32º F and 104º F (0º C and 40º C). • Leave adequate space around all sides of the UPS for proper ventilation.
Mount your equipment in either a 4-post or 2-post rack or rack enclosure. The user must determine the fitness of hardware and procedures before mounting. If hardware and procedures are not suitable for your application, contact the manufacturer of your rack or rack enclosure.
Impor tant Safety Instructions Connection and Start-Up Plug your UPS’ s line cord into an electrical outlet. Y our UPS must be connected to a dedicated circuit of sufficient amperage. Note, however , that the select models may be fitted with different plug types.
5 Optional Connections (continued) USB and RS-232 Serial Communications Use the included USB cable (see ) and/or DB9 serial cable (see ) to connect the UPS to a Media Center PC, home automation system or server . Install the T ripp Lite PowerAlert Software appropriate to your equipment's operating system.
Front P anel Switches “ON/TEST” Button: This switch controls four separate UPS functions: UPS Power ON T o turn the UPS on, press this button, hold it for several seconds until you hear a beep, then release it. The “ON LINE” LED will illuminate.
7 Front P anel Indicator Lights continued “BYP ASS” LED: This yellow light will flash to indicate that the UPS’ s DC/AC inverter is deactivated and the UPS is in the “Bypass” mode.
Rear Panel “REPLACE BA TT” LED: This red light will illuminate constantly and the UPS alarm will beep every 2 seconds if your UPS’ s microprocessor detects a battery fault or if your UPS fails the automatic self-test (after you turn your UPS ON) and the UPS battery is less than fully charged.
9 Rear Panel continued AC Receptacles (V aried by Model): These 15-, 20- and 30-amp receptacles provide your connected equipment with pure sine-wave AC output from the AC line during normal operation and from battery power during blackouts and severe brownouts.
The UPS’ s control panel lights will turn on in the sequences below to signal that the UPS is having operational difficulties. Lights (On/Flashing) and Condition Solution On: REPLA CE BA TT Let the .
11 T roub leshooting (continued) Lights (On/Flashing) and Condition Solution O n : FA U LT, 2 5 % Restar t the UPS. If the problem persists, Flashing: LINE contact T ripp Lite for repairs. Condition: No Output due to High Bus V oltage and Abnormal Input On: F AUL T Restar t the UPS.
Visit www .tripplite.com/warranty today to register the warranty for your new T ripp Lite product. Y ou'll be automatically entered into a drawing for a chance to win a FREE T ripp Lite product!* * No purchase necessary . Void where prohibited. Some restrictions apply .
Condiciones para la Póliza de Garantía en México Estas condiciones para México sustituyen cualquier v ersión anter ior que pueda haber aparecido en la sección en español de su manual de usuario .
An important point after buying a device Tripp Lite Audio/Video Pure Sine Wave UPS System (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tripp Lite Audio/Video Pure Sine Wave UPS System yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tripp Lite Audio/Video Pure Sine Wave UPS System - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tripp Lite Audio/Video Pure Sine Wave UPS System you will learn all the available features of the product, as well as information on its operation. The information that you get Tripp Lite Audio/Video Pure Sine Wave UPS System will certainly help you make a decision on the purchase.
If you already are a holder of Tripp Lite Audio/Video Pure Sine Wave UPS System, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tripp Lite Audio/Video Pure Sine Wave UPS System.
However, one of the most important roles played by the user manual is to help in solving problems with Tripp Lite Audio/Video Pure Sine Wave UPS System. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tripp Lite Audio/Video Pure Sine Wave UPS System along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
