Instruction/ maintenance manual of the product TEG-240WS TRENDnet
Go to page of 10
TEG-160WS TEG-240WS Quick Inst allation Guide.
T able of Contents English ...................................................................................................... T roubleshooting ........................................................................................ 1 1 3 2 6 1. Before Y ou Start 2.
System Requirements Application TEG-160WS/TEG-240WS Quick Installation Guide Utility & User Guide CD-ROM 2 Mounting Brackets with Screws Power Cord Web Browser: Internet Explorer (5.0 or above), Netscape (6.0 or above) Computer with Network adapter installed Package Content 1.
2. Hardware Installation English 2 2. Connect a CA T -5 RJ-45 network cable from the computer to an available Ethernet port of the TEG-160WS/TEG-240WS.
English 3 ote: If you would like to easily discover all the Web Management Switches on the network, assign IP Address, change the password, and upgrade to new firmware, then install the Web Management Utility . Follow the steps below . 3. Click Start > Programs > web_management_utility , and then click web_management_utility .
English 4 4. Click Discovery , and then double- click the Switch that appears in the Discovery List . 5. Click the Switch in the Monitor List and then click Configuration setting . 6. Configure the IP Address , Subnet mask , Gateway , and Password . Click Set .
English 5 7. Click OK . 8. Click Web access . 9. T ype in your Password and then click Login . For more information regarding the Web-based Smart Utility configuration and advanced settings, please refer to the User's Guide included on the Utility CD- ROM or TRENDnet's website at www .
Q1: A1: Q2: A2: Q3: A3: Q4: A4: Q5: A5: After connecting the TEG-160WS/TEG-240WS to a power outlet, the LEDs do not turn on. Check the connection of the power cord to the TEG-160WS/TEG-240WS and the power outlet. Also check that the power outlet is receiving power .
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation.
Copyright ©2006. All Rights Reserved. TRENDnet. P r o d uc t War r a n t y Re gi s t r a ti o n Please take a moment t o regist er your product online.
An important point after buying a device TRENDnet TEG-240WS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TRENDnet TEG-240WS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TRENDnet TEG-240WS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TRENDnet TEG-240WS you will learn all the available features of the product, as well as information on its operation. The information that you get TRENDnet TEG-240WS will certainly help you make a decision on the purchase.
If you already are a holder of TRENDnet TEG-240WS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TRENDnet TEG-240WS.
However, one of the most important roles played by the user manual is to help in solving problems with TRENDnet TEG-240WS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TRENDnet TEG-240WS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
