Instruction/ maintenance manual of the product TDM-E400 TRENDnet
Go to page of 15
TDM-E400 TDM-C400 Quick Inst allation Guide.
T able of Contents T able of Contents V ersion 09.07.2006 English ....................................................................................................... T roubleshooting ................................................................
Installation Requirements Application ADSL/ADSL2/ADSL2+ service up and running on your telephone line. Package Content 1. Before Y ou Start English 1 TDM-E400/TDM-C400 CD-ROM (User's Guide) Quick Installation Guide 1 x RJ-45 Cat.
English 2 Collect the following information from your ADSL2+ service provider VPI value: ______ VCI value: ______ Encapsulation type: □ LLC/SNAP or □ VC/MUX As well as: For PPPoA (RFC2364) or PPPo.
English 3 2. Hardware Installation 3. Attach the power connector to the ADSL2+ ethernet router . 2. Connect the RJ-45 cable (and/or connect the USB cable for TDM-C400 USB combo Model only). 1. Connect the RJ-1 1 cable. 4. Allow the device 60 seconds to boot.
English 4 3. Software Installation (TDM-C400 only) Note: For Windows 98/98SE applications, you may need the Windows 98/98SE CD ROM to complete the installation. Before starting the software setup process, close all Windows programs currently running on your PC.
English 5 3. The “Welcome!” windows appears. Exit all Windows programs before continuing. Then, click on Next . 4. Please review the license agreement and click Accept to continue. 5. The USB Modem Setup Wizard will begin installing the software and indicates the progress of the installation.
7. A message will be displayed requiring you to reboot the system. Select “Y es, reboot the computer now” and then click Close . 9. From Programs, go to TRENDnet DSL Modem and click on the DSL Status. English 6 8. After rebooting, the device will be installed.
English 7 Note: The DHCP server of the ADSL2+ modem router is enabled by default. Please configure your computer to automatically obtain an IP address from the ADSL2+ modem router ’ s DHCP Server . 2. Enter User name and Password, and then click OK .
English 8 4. The Quick Configuration table will appear requiring you to fill in the fields with the appropriate information provided by your Service Provider . 5. Then click the Submit button. 6. Click Admin in the Web Configuration screen. 7. Click Commit & Reboot .
9. The browser will indicate that your changes have been committed successfully . 10. The Reboot Mode scroll by default is Reboot in the Commit & Reboot sub-session. 1 1. Click the Reboot button to reboot your ADSL2+ modem router . 12. Please wait 15 ~ 20 seconds for reboot to finish completely .
10 T roubleshooting Q1: A1: Q2: A2: POWER LED does not illuminate after the product is turned on. What should I do? V erify that you are using the power cable provided with the device and that it is securely connected to the ADSL2+ modem and a wall socket/power strip.
1 1 Q7. A7: Q8: A8: Q9. A9. My PC cannot access the Internet. Use the ping utility , described on page 174 of the UG, check whether your PC can communicate with the ADSL2+ Modem Router 's LAN IP address (by default 192.168.1.254). If it cannot, check the Ethernet cabling.
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation.
Copyright ©2006. All Rights Reserved. TRENDnet. P r o d uc t War r a n t y Re gi s t r a ti o n Please take a moment t o regist er your product online.
An important point after buying a device TRENDnet TDM-E400 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TRENDnet TDM-E400 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TRENDnet TDM-E400 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TRENDnet TDM-E400 you will learn all the available features of the product, as well as information on its operation. The information that you get TRENDnet TDM-E400 will certainly help you make a decision on the purchase.
If you already are a holder of TRENDnet TDM-E400, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TRENDnet TDM-E400.
However, one of the most important roles played by the user manual is to help in solving problems with TRENDnet TDM-E400. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TRENDnet TDM-E400 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
