Instruction/ maintenance manual of the product 100BASE-FX TRENDnet
Go to page of 12
100Base-FX Fiber Conver ters Quick Inst allation Guide.
T able of Contents Deutsch ..................................................................................................... Spefications .............................................................................................. Ordering Information.
Glasfaserkonverter Kurzanleitung zur Installation Netzteil (7,5 V Gleichstrom, 1,5 A) Packungsinhalt Mindestanforderungen 1. Bevor Sie anfangen Deutsch 1 Abwesenheit von starken Quellen elektromagneti.
2. Installation der Hardware Deutsch 2 Installation eigenständiger Glasfaserkonverter 1. V erbinden Sie den Glasfaserkonverter mit einem Glasfaserkabel. Für den TFC-1 10MM/MST/MSC ist ein Multimodus- und für den TFC-1 10S15/S30/S60/S100/ S20D3/S20D5/S40D3/S40D5 ein Einzelmodus-Kabel erforderlich.
Deutsch 3 Ihre Installation ist beendet! Installation der Glasfaserkonverter in einem Gehäuse 5. Lösen Sie die Schraube und nehmen Sie den Glasfaserkonverter aus dem Metallgehäuse. 4. Schrauben Sie die Abdeckung des entsprechenden Gehäuseteils ab.
4 DIP Switches: TFC-1 10 series: Duplex (On/half-duplex, Of f/full-duplex) TFC-15MS100: None Cable : 10BASE-T : 2-pair UTP Cat. 3,4,5 100BASE-TX: 2-pair UTP Cat. 5 100BASE-SX: 62.5/125um or 50/125um multi-mode fiber optic cable 100BASE-LX: 9/125um or 10/125um single-mode fiber optic cable Applicable Standards: IEEE 802.
TFC-1 10MSC TFC-1 10MST TFC-1 10MM TFC-1 10S15 TFC-1 10S30 TFC-1 10S60 TFC-1 10S100 TFC-1 10S20D3 TFC-1 10S20D5 TFC-1 10S40D3 TFC-1 10S40D5 TFC-15MS100 Cat. 3, 4, 5, EIA/TIA-568 100-ohm STP Cat. 3, 4, 5, EIA/TIA-568 100-ohm STP Cat. 3, 4, 5, EIA/TIA-568 100-ohm STP Cat.
6 T roubleshooting Q1: A1: Q2: A2: Q3: A3: After connecting the Fiber converter , the LEDs do not turn on. What should I do? First, check that the power outlet is receiving power . Second, make sure the power adapter is firmly connected to the Fiber converter and the power outlet.
Limited W arranty - 5 Y ear Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase.
W ARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERA TE AS W ARRANTED ABOVE, THE CUST OMER’S SOLE REMEDY SHALL BE, A T TRENDNET’S OPTION, REP AIR OR REPLACEMENT .
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation.
Copyright ©2006. All Rights Reserved. TRENDnet. P r o d u c t War r a n t y Re g i s t r a t i o n Please take a moment t o regis t er your product online.
An important point after buying a device TRENDnet 100BASE-FX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TRENDnet 100BASE-FX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TRENDnet 100BASE-FX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TRENDnet 100BASE-FX you will learn all the available features of the product, as well as information on its operation. The information that you get TRENDnet 100BASE-FX will certainly help you make a decision on the purchase.
If you already are a holder of TRENDnet 100BASE-FX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TRENDnet 100BASE-FX.
However, one of the most important roles played by the user manual is to help in solving problems with TRENDnet 100BASE-FX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TRENDnet 100BASE-FX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
