Instruction/ maintenance manual of the product 1000 Base-SX/LX TRENDnet
Go to page of 12
1000Base-SX/L X Fiber Conver ters Quick Inst allation Guide.
T able of Contents English ...................................................................................................... Spefications .............................................................................................. Ordering Information.
System Requirements Product Detail Fiber Converter Quick Installation Guide AC Power Supply (7.5 DC, 1.5A) Package Contents 1. Before Y ou Start English 1 An environment that is free from strong elect.
2. Hardware Installation English 2 Installing two stand alone Fiber Converters 1. Connect the fiber cable to the fiber converters. This cable must be multi-mode for the TFC-1000MSC. This cable must be single-mode for the TFC-1000S20/S50/S70/S10D3/ S10D5.
5. Unfasten the thumbscrew and remove the fiber converter from the metal casing. Y our installation is now complete. English 3 4. Unscrew the bay cover from the desired bay on the chassis. 6. Slide the media converter into an available slot and fasten the thumbscrew .
4 DIP Switches: Switch 1: On(Forced Mode); Off(Auto-Negotiation) Switch 2: On(LLR enabled); Off(LLR disabled) Cable : 1000BASE-T Cat. 5e or Cat. 6 EIA/TIA-568 100-ohm screened twisted-pair (STP) 1000BASE-SX 62.
TFC-1000MSC TFC-1000S20 TFC-1000S50 TFC-1000S70 TFC-1000S10D3 TFC-1000S10D5 Cat. 3, 4, 5, EIA/TIA-568 100-ohm STP Cat. 3, 4, 5, EIA/TIA-568 100-ohm STP Cat. 3, 4, 5, EIA/TIA-568 100-ohm STP Cat. 3, 4, 5, EIA/TIA-568 100-ohm STP Cat. 3, 4, 5, EIA/TIA-568 100-ohm STP Cat.
6 T roubleshooting Q1: A1: Q2: A2: Q3: A3: After connecting the Fiber converter , the LEDs do not turn on. What should I do? First, check that the power outlet is receiving power . Second, make sure the power adapter is firmly connected to the Fiber converter and the power outlet.
Limited W arranty - 5 Y ear Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase.
W ARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERA TE AS W ARRANTED ABOVE, THE CUST OMER’S SOLE REMEDY SHALL BE, A T TRENDNET’S OPTION, REP AIR OR REPLACEMENT .
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation.
Copyright ©2006. All Rights Reserved. TRENDnet. P r o d u c t Wa r r a n t y R e g i s t r a t i o n Please take a moment t o regis t er your product online.
An important point after buying a device TRENDnet 1000 Base-SX/LX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TRENDnet 1000 Base-SX/LX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TRENDnet 1000 Base-SX/LX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TRENDnet 1000 Base-SX/LX you will learn all the available features of the product, as well as information on its operation. The information that you get TRENDnet 1000 Base-SX/LX will certainly help you make a decision on the purchase.
If you already are a holder of TRENDnet 1000 Base-SX/LX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TRENDnet 1000 Base-SX/LX.
However, one of the most important roles played by the user manual is to help in solving problems with TRENDnet 1000 Base-SX/LX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TRENDnet 1000 Base-SX/LX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
