Instruction/ maintenance manual of the product SSEFE10XX-10X Transition Networks
Go to page of 7
* Typical maximum cable distance. Actual distance is dependent upon the physical characteristics of the network. (TX) = transmit, (RX) = receive The SSEFE10xx-10x media converter is designed to be installed in pairs, where one is the local media converter and the other is the remote .
2 SSEFE10xx-10x 24-Hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation The Link Pass-Through and speed switches are located on the side of the media converter.
4 SSEFE10xx-10x 24-Hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation -- Continued Install the Fiber Cable The SSEFE10xx-10x is designed to be installed in pairs over the fiber link, where one is the local media converter and the other is the remote.
6 SSEFE10xx-10x 24-Hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Cable Specifications The physical characteristics must meet or exceed IEEE 802.3™ specifications. Fiber Cable Bit Error Rate: <10 -9 Single mode: 9 µm SSEFE1012-100 1310 nm single mode Fiber-optic Transmitter Power: min: -15.
8 SSEFE10xx-10x 24-Hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 T echnical Specifications For use with Transition Networks Model SSEFE10xx-10x or equivalent. Standards: IEEE 802.3™, 10Base-T, 100Base-TX, 100Base-FX Data Rate: 10 Mb/s, 100 Mb/s Dimensions 3.
10 SSEFE10xx-10x 24-Hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 T r oubleshooting -- Continued 6. Is the TP-ACT LED illuminated? NO • Check the twisted-pair copper cables for proper connection. • Contact Tech Support: 1-800-260-1312, Int’l: 00-1-952-941-7600.
Trademark Notice All trademarks and registered trademarks are the property of their respective owners. Copyright Restrictions © 2005 Transition Networks. All rights reserved. No part of this work may be reproduced or used in any form or by any means - graphic, electronic, or mechanical - without written permission from Transition Networks.
An important point after buying a device Transition Networks SSEFE10XX-10X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Transition Networks SSEFE10XX-10X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Transition Networks SSEFE10XX-10X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Transition Networks SSEFE10XX-10X you will learn all the available features of the product, as well as information on its operation. The information that you get Transition Networks SSEFE10XX-10X will certainly help you make a decision on the purchase.
If you already are a holder of Transition Networks SSEFE10XX-10X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Transition Networks SSEFE10XX-10X.
However, one of the most important roles played by the user manual is to help in solving problems with Transition Networks SSEFE10XX-10X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Transition Networks SSEFE10XX-10X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
