Instruction/ maintenance manual of the product SFMFF4040-100 Transition Networks
Go to page of 5
User’ s Guide SFMFF4040-100 Optical Line Converter for Small Form Factor Pluggable (SFP) Transceiver Modules The Transition Networks SFMFF4040-100 optical line converter is designed to accommodate two (2) small form factor pluggable (SFP) transceiver modules.
SFMFF4040-100 2 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation Install SFP T ranscei ver Modules To install SFP transceiver modules into the SFMFF4040-100 converter: 1. Position the SFP transceiver module at either installation slot, with the label facing up.
SFMFF4040-100 4 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Oper ation Status LEDs The SFMFF4040-100 optical line converter is designed to operate without user intervention. Use the status LEDs to view the operation of the converter in the network.
SFMFF4040-100 6 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 T roubleshooting If the SFMFF4040-100 converter fails, isolate and correct the failure by determining the answers to the following questions and taking the indicated action: 1.
Trademark notice All trademarks and registered trademarks are the property of their respective owners. Copyright restrictions © 2004 Transition Networks. All rights reserved. No part of this work may be reproduced or used in any form or by any means—graphic, electronic, or mechanical—without written permission from Transition Networks.
An important point after buying a device Transition Networks SFMFF4040-100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Transition Networks SFMFF4040-100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Transition Networks SFMFF4040-100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Transition Networks SFMFF4040-100 you will learn all the available features of the product, as well as information on its operation. The information that you get Transition Networks SFMFF4040-100 will certainly help you make a decision on the purchase.
If you already are a holder of Transition Networks SFMFF4040-100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Transition Networks SFMFF4040-100.
However, one of the most important roles played by the user manual is to help in solving problems with Transition Networks SFMFF4040-100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Transition Networks SFMFF4040-100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
