Instruction/ maintenance manual of the product MIL-SM2401MAF Transition Networks
Go to page of 111
MIL-SM2401MAF 24-Port 10/100 BASE-TX POE Two combo ports 10/100/1000BASE-T/1000Bas e-X SFP Advanced Managed S witc h User Guide Rev.1.01 Nov-2009.
FCC Warning This Equipment has b een tested and found to comply wi th the limits for a Class-A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful int erference in a residential installation.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 i Contents FCC W arning ................................................................................................................. i CE Mark W arning .
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 ii VLAN Com mands Set .................................................................... 26 Spanning Tr ee Comm ands Set .......
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 iii Aggr egator State Activ ity .............................................................................. 64 Forw arding and Filter ing .
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 iv Improper Netw ork Top ologies ............................................................... 97 Diagnosing LED Indica tors .......
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 1 Introduction The 24 10/100TX plus 2 Mini-GBIC/Copper managed PoE switch is a multi-port Sw itch that can be used to build high-performance switched workgroup networks.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 2 Back Pressure with half duplex Supports Port Based VLAN /802 .1Q Tag VLAN Supports IEEE802.3ad Port Trunk with LACP Supports Spanning Tree protocol IEEE 802.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 3 Type of Trap Cold start Link down Link up, Authorization fail Trap stations up to 3 P.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 4 Port Based Priority Supports 3 settings: Disable, Low or High priority W hen set to .
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 5 Fault status detect Null: no PD presents Overload: current support over 475mA @ DC 48.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 6 Power monitor Power supply monitoring function for AC power, DC power Additional DC p.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 7 Hardware Description This chapter mainly describes the ha rdw are of the 2 4 10 /100TX plus 2 Mini-GBIC/Copper managed PoE switch and gives a physical and functional overvi ew on the certain switch.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 8 crossover cabling. 2 Giga port: Traditional RJ-45 ports can be used for uplinking.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 9 BLINK The port is receiving or transmitting data.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 10 BLINK Collision of Packets occurs in the port OFF In Half-duplex mode Rear Panel The.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 11 2. Remove adhesive backing from the Rubber Pads. 3. Apply the Rubber Pads to each corner on the bottom of the switch. Th ese footpads can prevent the switch from shock/vibration.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 12 Network Application This section provides a few samples of netw o rk topology in w h ich the switch is used.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 13 Small W orkgroup Application Segment w orkgroup For enterprise networks where large d ata broadcast s are constantly processed, this switch is an ideal solution for department users to connect to the corporate backbone.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 14 DC Pow er Input The 24 10/100 T X plus 2 Mini-GBIC/Copper managed PoE sw itch has a DC 48V pow e r input for the extra power supply connection.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 15 Console Manageme nt Connecting to t he Switch The console port is a female DB-9 connector that enables a co nnection to a PC o r terminal for monitoring and co nfiguring th e Switch.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 16 both User name and Password (use Enter key to switch), then p ress Enter key and the Main Menu of console management appears ri ght after a s be low.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 17 Use this mode to • Perform basic tests. • Display system information. Privileged EXEC Enter the enable command while in user EXEC mode.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 18 UPS Enter the ups command while in privileged EXEC mode. switch(ups)# To exit to privileged EXEC mode, enter exit Use this mode to UPS parameters for the switch.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 19 ip address [IP-address] [subnet-mask ] [ gateway] Global configuration mode Use the ip address interface configuration command to set an IP address for a switch.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 20 show accounting Privileged EXEC Show username & password Switch# show accounting.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 21 Port Commands Se t Commands Command Level Description Defaults Example Use the f.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 22 speed [10| 100 | 1000 | auto] Interface configuration mode Use the speed configuration command to specify the speed mode of operation for module Ethernet.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 23 priority on [high | low] or no priority Interface configuration mode Use the priority configuration command on Ethernet ports. Use the no form of this command to disable security on the port.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 24 show interface configuration Interface configuration mode show interface configurati.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 25 interface [FastEthernet /module Ethernet] [slot id] [id] Interface configuration mod.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 26 Enable Check OK! NEW: 2 4 Update finished!! VLAN Commands S et Commands Command .
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 27 vlan [Group name] add [port ID] VLAN database mode Set the port of some port group Switch (vlan)# vlan v2 add 5 vlan [Group name] delete [port ID] VLAN database mode Remove the port from it’s port group.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 28 vlan protocol [group name] [protocol value] vlanid [group ID] port [port ID] tag [po.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 29 vlanidrange [VLAN ID range] VLAN database mode Set VLAN ID range [1~255] range 0 [25.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 30 untagged] VLAN protocol [Group name] delete [port ID] VLAN database mode Remove the port from its port group.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 31 Spanning Tree Com mands Set Commands Command Level Description Defaults Example show spanning-tree User EXEC mode Display a summary of the spanning- tree states.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 32 spanning-tree priority [number] Global configuration mode Use the spanning-tree max-age global configuration command to change the priority.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 33 no form of this command to return to the default interval.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 34 forwarding state. Use the no form of this command to return to the default value.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 35 priority that is used when two switches tie for position as the root switch. Use the no form of this command to return to the default value.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 36 qos queuepolicy [Policy] hi [number] low [number] Global configuration mode [Policy]:fcfs: first in and first out wrr: weight round robin ahbl: all high before low.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 37 show qos low-priority-del ay-bound Global configuration mode Show low priority delay board.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 38 Mac / Filter Table C ommands Set Commands Command Level Description Defaults Example mac-address-ta ble aging-time [on | off] mac-address-ta ble aging-time [sec.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 39 no mac-address-ta ble [static | filter] hwaddr [MAC address] vlanid [VLAN-ID] Interface configuration mode Use the no mac-address-table privileged EXEC command to delete entries from th e MAC address table.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 40 SNMP Comm ands Set Commands Co mmand Level Description Defaults Example snmp sys.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 41 host [IP address] community [word] snmp-server host 192.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 42 port monitoring is enabled. Port 04 TxRx: Port 05 TxRx: Port 06 TxRx: Port 07 TxRx: Port 08 TxRx : Analysis Port 09 TxRx: Port 10 TxRx: OK.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 43 8021x system sharekey [number] Or no 8021x system sharekey Global configuration mode Use the 802.1x system sharekey global configuration command to change the shared key value.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 44 8021x misc txperiod [sec.] Or no 8021x txperiod Global configuration mode Use the 802.1x misc TX period global configuration command to set the TX period.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 45 Reject: the specified port is required to be held in the unauthorized state. A ccept: th e specified port is required to be held in the Authorized state.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 46 IP:192.168.1.1 Image Filename:backup. dat tftp:config.text flash [TFTP IP address] [file name] Global configuration mode Restore configure file command Switch(config)# Tftp:config.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 47 Info UPS mode Show UPS information Switch (ups)# info Company Name :xxx Model :xxx Version :xxx Test 10 UPS mode UPS will perform the self-test for 10 seconds.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 48 portebl [enable | disable] [ports] PoE mode Enabling or disabling the port PoE injected function.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 49 show systemlog Privileged EXEC Show system log client & server information switch# show systemlog Syslog Client: Enable Syslog Server Ip: 192.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 50 Web-Based Management This section introduces t he configuration and functions of the W eb-Based management.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 51 2. Key in “http:// “+” the IP address of the switch”, and then Press “ En ter ”. Uniform Resource Locator 3. The login screen appears right after.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 52 Negotiation: Displays the Auto Negotiation mode. Con f ig column means that its value was configured by the user. Actual means the current value of the port.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 53 View the Port Information Click the port on the switch p anel f igure on the web pag.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 54 Port Statistics interf ace A dmi nistrator Administrator fun ction provides the fo l.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 55 IP Ad dress Configure the IP address and DHCP client function.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 56 System Description: Displays the description of the switch. Firmware Version: Displays the Firmware version of the switch. Kernel Version: Displays the Kernel Software version.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 57 Enable Low Queue Delay Bound: Limit the low p riority packets queuing time in the switch. If the low priority packet stays in switch exceed ing Max Delay Time, it will be sent.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 58 Priority Queue Service settings: Select the priori ty queue service type. 801.1p Priority First Come First S ervice: The sequence of packe ts sent de pend on arriving order.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 59 Switch Misc Conf ig setting interfac e Conso le Port Information Console is a standard UART interface to communicate with S erial P ort.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 60 Port Controls Change the port status Select the port by scroll the list in Port column State: Current port status. The port can be set to disable or enable mode.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 61 the port from learning any new MAC addresses, a nd then use the static MAC addresses function to define a list of MAC addresse s that can access to secure port.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 62 Group ID: There are four trunk groups to be selected. Choose the " Group ID " and click Se l ect butt on. LACP: W hen enabled, the trun k group is using LACP.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 63 Trunking—Aggregator Setting interf ace Aggregator Informa tion W hen you have setup the aggreg ator setting w ith LACP disabled, you w ill see the l ocal static trunk group information in here.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 64 Aggregator State Activity Having set up t he LACP aggregator on the tab of Aggregator Setting, you can configure the state activity f or the members of the LACP trunk group.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 65 Forwarding and Filtering IGMP Snooping The Internet Group Ma nagement Protocol (IGMP) is an internal protocol of t he Internet Protocol (IP) suite.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 66 IGMP Snooping inter face Static M AC Address W hen th e user adds a sta tic MAC address which will rema ins in the switch's a ddress table, regardless of whether the d evice is physically connected to t he switch.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 67 Static MAC Address i nterface MAC filtering MAC a ddress f iltering allows the switch to drop unwanted traffic. Traffic is f iltered based on the destination addresses.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 68 MAC Filtering interf ace VLAN configuration A Virtual LAN (VLAN) is a logical networ.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 69 ports are treated as belonging to a nother single VLAN.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 70 VLAN—PortBase Add interf ace Key in the VLAN name, VLAN ID and select the members for the VLAN group.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 71 The VLAN groups will be displayed in table To view the VLAN groups in next p.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 72 You can create Tag-based VLAN, and enable or disable GVRP protocol. There are 256 VLAN groups to provide co nfiguration. E nable 802.1Q VLAN, all ports on the switch belong to default VLAN of VID 1.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 73 VLAN gr oup can access th e switch. Th e st eps of setting se curity VLAN refer to the following below steps in Basic section. After t he security VLAN group has been configured, you can add other VLAN groups.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 74 configured, the trun k groups will list in th e port list (For example: Trun k1, Trunk2…). The trunk group also can be configured as the VLAN member.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 75 Set the outgoing frames as VLAN-Tagged frames or untagged. Tag: The outgoing frames involve VLAN tag. Untag: The outgoing frames don’t involve VLAN tag.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 76 A L L: Acceptable all Packet. T ag Only : Only packets with matched VLAN ID have the pe rmission to go through the port. And then, click Ap pl y butt on.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 77 System Configurati on User can choose the RSTP mode and view Root Bridge information. Modifying STP state: RSTP Mode: Set RSTP mode as 802.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 78 Spanning Tree – S ystem Conf iguration interfac e Per Port Configurat ion Configure path cost and priority of every port Select the port in Port column.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 79 A dmin Edge: T he p ort directly conn ected to end stations won’t crea te bridging loop in the net work. To configure the p ort as an edge port, set t he port to “ True ” status.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 80 SPT – Per Port Config uration interf ace Port Mirroring The Port mirroring is a method for m onitor traffic in switched ne tworks.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 81 Prot Mirroring interf ace Port Mirroring State: Set mirroring mode—Disable, RX, TX, and Both. A nal ysis Port: Select one port to be the analysi s port which can be used to see all monitored port tra ff ic.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 82 SNMP Manageme nt The SNMP is a Protocol that g o verns the transfer o f information b etween management and agent. The switch supports SNMP V1.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 83 Strings: Key in the name of string. RO: Enable requests accompanied by this string to display MIB-object i nformation (Read only).
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 84 Security Manager interface SNTP Con figuration Configure t he SNTP (Simple Net work Time Protocol) setting which S NTP allows th e switch t o synchronize switch clocks in the Internet .
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 85 802.1X Con figuration W hen the IEEE 802.1X protocol is e nabled, u ser can configure the parameters of 802.1X. To enable the IEEE 802.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 86 Per port Configurati on Select the port in Port column Select the state of port: Reject: The specified port is required to be held in the unauthorized state.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 87 802.1x Configuration— Per Port Conf iguration Misc Configuration Quiet Period: Set the period which the port doesn’t try to acquire a supplicant.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 88 System Log Client Mode: Select the sy ste m log mode—Client Only , Server Only, or Both. System Log Server IP Address: Assign the system log server IP.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 89 System Log Interf ace Save Con fi guration Save the configuration to the flash m emory when the co nfigurations have been changed.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 90 TFTP Update Firm ware interf ace Configuration Backup Restore the backup configuration f rom TFTP se rver to the switch. Also, u ser can backup the configuration to TFT P server .
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 91 TFTP Restore Config uration interf ace TFTP Backu p Configuration Save current flash ROM value from the switch to TFTP server. TFTP Server IP Address: Key in the TFTP server IP address.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 92 Factory Default int erface System Reboot Reboot the Switch in software reset. Click R eboot button to reboot the switch. System Reboot interf ace Power Status View the connected UPS information and set command to UPS.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 93 UPS information: The information w ill be av a ilable when t he UPS is connected t o the switch and the connection is normal and UPS is powered on.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 94 Select the port and set configuration. And then, click Ap pl y butt on. Press the R efresh butt on to refresh. PoE Status Interf ace Power Limit Management: Enable/disable the PoE power management function.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 95 power classification function. Power Limit by Management: Tick this check box to enable/disable the port power limit management for PoE power management.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 96 Troubleshooting This section is intended to help solve th e most common p roblems on the 24 10/100TX plus 2 Mini-GBIC/Copper managed PoE switch.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 97 Improper Net w ork To pologies It is important to make sure that the netw o rk topology is valid. Common topology faults include excessive cable length and too many repeaters (hubs) bet ween end nodes.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 98 Pin Signal / Name 1 RX+ / VCC - 2 RX- / VCC - 3 TX+ / VCC + 4 NC 5 NC 6 TX- / VCC + .
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 99 (VCC-) 1 1 (VCC-) (VCC-) 2 2(VCC-) (VCC+) 3 3(VCC+) (VCC+) 6 6(VCC+) MDI-X MDI w/ br.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 100 Technical Specification This s ection provides the speci f ications of th e 24 10/100TX plus 2 Mini-GBIC/Copper managed PoE switch. Standard IEEE802.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 101 RS-232 connector One RS-232 DB-9 female connector for switch management 2 RS-232 DB-9 male connectors on rear side for DC power supply and UPS management Switch architecture Store and forward switch architecture.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 102 Ventilation 2 DC Fans with detection EMI FCC Class A, CE Safety UL, cUL, CE/EN60950.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 103 Appendix Console Port Pi n Assignments The DB-9 se rial port on the front pa nel is u sed to connect to the switch for o ut-of-band console configuration.
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 104 Cables The RJ-45 p orts o n t he switch support automatic MDI/MDI-X ope ration, s o you c an use standard straight-throug h twisted-pair cables to connect to any o ther ne twork device (PCs, servers, switches, rou ters, or hubs).
Transition Network s MIL-SM2401 MAF 24-Hour Technical Support: 1-800-260-1 312 International: 00-1-952-941-7 600 105 All ports on th is switch support automatic MDI/MDI-X operation, you can use straight-through cables for all network connections to PCs or servers, or t o other switches or hubs.
An important point after buying a device Transition Networks MIL-SM2401MAF (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Transition Networks MIL-SM2401MAF yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Transition Networks MIL-SM2401MAF - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Transition Networks MIL-SM2401MAF you will learn all the available features of the product, as well as information on its operation. The information that you get Transition Networks MIL-SM2401MAF will certainly help you make a decision on the purchase.
If you already are a holder of Transition Networks MIL-SM2401MAF, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Transition Networks MIL-SM2401MAF.
However, one of the most important roles played by the user manual is to help in solving problems with Transition Networks MIL-SM2401MAF. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Transition Networks MIL-SM2401MAF along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
