Instruction/ maintenance manual of the product CPSMP-140 Transition Networks
Go to page of 7
User’ s Guide CPSMP-130 48-VDC Power Supply Module CPSMP-140 24-VDC Power Supply Module 13-Slot PointSystem™ Accessory The Transition Networks CPSMP-130 power supply is a 48-VDC slide-in-module th.
CPSMP-130 & CPSMP-140 2 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 READ AND FOLLOW ALL WARNING NOTICES & INSTRUCTIONS MARKED ON THE PRODUCT OR INCLUDED IN THE MANUAL. CAUTION: All installation and service must be performed by qualified service personnel.
CPSMP-130 & CPSMP-140 4 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Connect to External P o wer CAUTION: Ensure that external power source is NOT powered and that the On/Off switch on the power supply module is set to “0” when connecting to the external power source.
CPSMP-130 & CPSMP-140 6 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 WARNING: Do NOT connect the power supply module to the external power source before installing it into the chassis. Failure to observe this caution could result in equipment damage and/or personal injury or death.
CPSMP-130 & CPSMP-140 8 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Replace the Fuse CAUTION: Ensure that the power supply module has been disconnected from the external power source and the module’s On/Off switch has been set to “0”.
CPSMP-130 & CPSMP-140 10 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 T echnical Specification For use with Transition Networks model CPSMP-130 or CPSMP-140 or equivalent. Standards UL Listed; FCC & CISPR Class A; CE Mark Dimensions 3.
Trademark Notice All trademarks and registered trademarks are the property of their respective owners. Copyright Restrictions © 2001, 2004 Transition Networks. All rights reserved. No part of this work may be reproduced or used in any form or by any means - graphic, electronic, or mechanical - without written permission from Transition Networks.
An important point after buying a device Transition Networks CPSMP-140 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Transition Networks CPSMP-140 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Transition Networks CPSMP-140 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Transition Networks CPSMP-140 you will learn all the available features of the product, as well as information on its operation. The information that you get Transition Networks CPSMP-140 will certainly help you make a decision on the purchase.
If you already are a holder of Transition Networks CPSMP-140, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Transition Networks CPSMP-140.
However, one of the most important roles played by the user manual is to help in solving problems with Transition Networks CPSMP-140. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Transition Networks CPSMP-140 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
