Instruction/ maintenance manual of the product 48 VDC-TO-12VDC SPS-48V Transition Networks
Go to page of 4
COMPLIANCE INFORMA TION UL Listed C-UL Listed (Canada) CISPR/EN55022 Class A FCC Regulations This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 of the FCC rules.
INST ALLA TION NOTE: The TRANSITION Networks 48-to-12 VDC External Power Supply is shipped with four (4) attached feet. 1. For installation, place on any well-ventilated table-top or shelf with access to a 48 VDC power source.
TECHNICAL SPECIFICA TIONS Input Input Voltage 48 VDC Inrush Current 0.20 A (peak cold start) Hold-Up Time 20 msec minimum at full load and nominal input voltage Isolation Voltage (Dielectric withstand) Meets IEC 960 for one minute.
MAINTENANCE Replacing Power Supply Module Fuse CAUTION: Wear a grounding device and observe electrostatic discharge precautions when replacing the fuse in the 48-to-12 VDC External Power Supply. Failure to observe this caution could result in damage to, and subsequent failure of, the 48-to-12 VDC External Power Supply.
An important point after buying a device Transition Networks 48 VDC-TO-12VDC SPS-48V (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Transition Networks 48 VDC-TO-12VDC SPS-48V yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Transition Networks 48 VDC-TO-12VDC SPS-48V - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Transition Networks 48 VDC-TO-12VDC SPS-48V you will learn all the available features of the product, as well as information on its operation. The information that you get Transition Networks 48 VDC-TO-12VDC SPS-48V will certainly help you make a decision on the purchase.
If you already are a holder of Transition Networks 48 VDC-TO-12VDC SPS-48V, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Transition Networks 48 VDC-TO-12VDC SPS-48V.
However, one of the most important roles played by the user manual is to help in solving problems with Transition Networks 48 VDC-TO-12VDC SPS-48V. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Transition Networks 48 VDC-TO-12VDC SPS-48V along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
