Instruction/ maintenance manual of the product EURORACK UBB1002 Behringer
Go to page of 7
www.behringer.com EURORACK UBB1002 Version 1.0 November 2002 Users Manual ENGLISH.
2 EURORACK UBB1002 This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosurevoltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature.
3 EURORACK UBB1002 UBB1002 EURORACK Ultra low-noise design 10-input 2-bus mic/line mixer with optional battery operation s Ultra low-noise ULN design, highest possible headroom, ultra-transparent soun.
4 EURORACK UBB1002 1. INTRODUCTION TABLE OF CONTENTS 1 . INTRODUCTION ......................................................... 4 1.1 Before you begin ............................................................ 4 1.2 Power supply ....................
5 EURORACK UBB1002 1. INTRODUCTION 1.3 Control elements 1.3.1 Interface panel Use this balanced XLR jack to connect a microphone to the UB B1002 (applies to channels 1 through 7/8). + The phantom power required for condenser mics can be activated with switch .
6 EURORACK UBB1002 3. SPECIFICATIONS 2. WIRING Fig. 2.1: 1/4" mono plug Fig. 2.2: 1/4" stereo plug Fig. 2.3: XLR connections Fig. 2.4: Insert send/return stereo plug Fig.
7 EURORACK UBB1002 4. WARRANTY 4. WARRANTY § 1 WARRANTY CARD/ONLINE REGISTRATION To be protected by the extended warranty, the buyer must complete and return the enclosed warranty card within 14 days of the date of purchase to BEHRINGER Spezielle Studiotechnik GmbH, in accordance with the conditions stipulated in § 3.
An important point after buying a device Behringer EURORACK UBB1002 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Behringer EURORACK UBB1002 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Behringer EURORACK UBB1002 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Behringer EURORACK UBB1002 you will learn all the available features of the product, as well as information on its operation. The information that you get Behringer EURORACK UBB1002 will certainly help you make a decision on the purchase.
If you already are a holder of Behringer EURORACK UBB1002, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Behringer EURORACK UBB1002.
However, one of the most important roles played by the user manual is to help in solving problems with Behringer EURORACK UBB1002. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Behringer EURORACK UBB1002 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
