Instruction/ maintenance manual of the product DTC P0135 Toyota
Go to page of 2
DI–56 – DIAGNOSTICS ENGINE 2000 CELICA (RM744U) DTC P0135 Heated Oxygen Sensor Heater Circuit Malfunction (Bank1 Sensor1) DTC P0141 Heated Oxygen Sensor Heated Circuit Malfunction (Bank1 Sensor2) CIRCUIT DESCRIPTION Refer to DTC P0125 (Insufficient Coolant T emp.
A09084 A09092 ON HT1A HT1B – DIAGNOSTICS ENGINE DI–57 2000 CELICA (RM744U) 1 Check voltage between terminals HT1, HT2 of ECM connectors and body ground. PREP ARA TION: (a) Remove the ECM cover . (b) Remove the 3 bolts from ECM. (c) T urn the ignition switch ON.
An important point after buying a device Toyota DTC P0135 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toyota DTC P0135 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toyota DTC P0135 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toyota DTC P0135 you will learn all the available features of the product, as well as information on its operation. The information that you get Toyota DTC P0135 will certainly help you make a decision on the purchase.
If you already are a holder of Toyota DTC P0135, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toyota DTC P0135.
However, one of the most important roles played by the user manual is to help in solving problems with Toyota DTC P0135. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toyota DTC P0135 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center